TST-130-01-G-D Equivalent & Substitute Parts

Part Overview

The TST-130-01-G-D is an active rectangular connector header manufactured by Samtec Inc. in the Flex Stack series. This through-hole mounted connector features 60 positions arranged in 2 rows with 0.100" (2.54mm) pitch, designed for board-to-cable/wire applications. The component is shrouded with 4-wall construction and utilizes push-pull fastening. Finding equivalent parts is necessary when addressing supply chain constraints, lead time requirements, or specific application compatibility needs while maintaining electrical and mechanical performance standards.

Substiute Parts

TST-130-01-G-D

Samtec Inc.In Stock: 966TST-130-01-G-D Datasheet

Current PartRFQ

1-5103308-2

TE Connectivity AMP ConnectorsIn Stock: 10241-5103308-2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TST-130-01-G-D is determined by strict alignment of the following critical parameters:

• Connector type (Header)
• Contact type (Male Pin)
• Number of positions (60)
• Number of rows (2)
• Pitch - mating (0.100" / 2.54mm)
• Row spacing - mating (0.100" / 2.54mm)
• Mounting type (Through Hole)
• Shrouding configuration (Shrouded - 4 Wall)
• Fastening type (Push-Pull)
• Termination method (Solder)
• Style (Board to Cable/Wire)

The substitute part 1-5103308-2 manufactured by TE Connectivity AMP Connectors meets all critical dimensional and functional parameters required for direct substitution in applications where the TST-130-01-G-D is specified.

Parameter Comparison

Engineering Selection Recommendations

Both the TST-130-01-G-D and 1-5103308-2 are active products with ROHS3 compliance and UL94 V-0 flammability ratings. Both components carry MSL 1 (Unlimited) moisture sensitivity classification and share identical ECCN and HTSUS codes, indicating equivalent regulatory and trade status.

The TST-130-01-G-D is available in bulk packaging with 907 units in stock. The 1-5103308-2 is supplied in tube packaging with 951 units in stock. Selection between these parts should be based on packaging requirements, inventory availability, and lead time considerations specific to your procurement timeline.

Frequently Asked Questions (FAQ)

Q: Can the 1-5103308-2 be used as a direct replacement for the TST-130-01-G-D?

A: Yes. Both connectors share identical critical parameters: 60-position, 2-row configuration with 0.100" (2.54mm) pitch, through-hole mounting, shrouded 4-wall construction, push-pull fastening, and solder termination. Mechanical and electrical compatibility is established through these matching specifications.

Q: What are the differences between these two parts?

A: The parts differ in manufacturer (Samtec vs. TE Connectivity), series designation (Flex Stack vs. AMP-Latch), packaging format (bulk vs. tube), contact material (phosphor bronze vs. brass), contact finish specifications, and current rating per contact (3.4A vs. 1A). Dimensional variations exist in contact length and insulation height.

Q: Are there packaging considerations when switching between these parts?

A: Yes. The TST-130-01-G-D is supplied in bulk packaging, while the 1-5103308-2 is supplied in tube packaging. Verify that your assembly process and handling procedures are compatible with the packaging format of your selected part.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 compliant, carry UL94 V-0 flammability ratings, and share identical MSL 1 (Unlimited) moisture sensitivity levels. Both are classified under ECCN EAR99 and HTSUS 8536.69.4040.

Q: What should be considered when selecting between these substitutes?

A: Consider supply chain availability, packaging requirements, current rating requirements (3.4A per contact for TST-130-01-G-D vs. 1A per contact for 1-5103308-2), operating temperature range (-55°C to 125°C for TST-130-01-G-D vs. -65°C to 105°C for 1-5103308-2), and contact material specifications for your specific application requirements.