TSSH-105-01-L-DV Equivalent & Substitute Parts

Part Overview

The TSSH-105-01-L-DV is a surface mount rectangular connector header manufactured by Samtec Inc. This 10-position, 2-row connector with 0.100" (2.54mm) pitch is designed for board-to-board or cable applications. The part is currently active in production with 804 units in stock. Alternative equivalent parts may be required due to supply constraints, packaging preferences, or specific application requirements such as different shrouding configurations or contact finish specifications.

Substiute Parts

TSSH-105-01-L-DV

Samtec Inc.In Stock: 838TSSH-105-01-L-DV Datasheet

Current PartRFQ

N2510-6V0C-RB-WD

3MIn Stock: 1000432N2510-6V0C-RB-WD Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TSSH-105-01-L-DV is determined by strict alignment of the following critical parameters:

• Connector Type: Header
• Contact Type: Male Pin
• Number of Positions: 10
• Number of Rows: 2
• Pitch - Mating: 0.100" (2.54mm)
• Row Spacing - Mating: 0.100" (2.54mm)
• Mounting Type: Surface Mount
• Termination: Solder
• Fastening Type: Push-Pull
• Contact Shape: Square

The substitute part N2510-6V0C-RB-WD manufactured by 3M meets all critical substitution criteria. Variations in secondary parameters such as shrouding configuration (2 Wall vs. 4 Wall), contact finish thickness, insulation material composition, and operating temperature maximum do not prevent functional equivalence in applications where these differences are acceptable.

Parameter Comparison

Engineering Selection Recommendations

Both the TSSH-105-01-L-DV and N2510-6V0C-RB-WD are active production parts with UL94 V-0 flammability ratings and RoHS compliance. The N2510-6V0C-RB-WD provides enhanced shrouding (4 Wall vs. 2 Wall) and includes keying slot and pick-and-place features. Selection between these parts should be based on application-specific requirements regarding operating temperature maximum (125°C vs. 105°C), shrouding robustness, and packaging format availability. Both parts maintain identical electrical and mechanical mating characteristics for the 10-position, 2.54mm pitch configuration.

Frequently Asked Questions (FAQ)

Q: Can the N2510-6V0C-RB-WD replace the TSSH-105-01-L-DV in all applications?

A: The N2510-6V0C-RB-WD is functionally equivalent for applications operating at or below 105°C. Applications requiring operation above 105°C up to 125°C must retain the TSSH-105-01-L-DV. The 4-wall shrouding of the 3M part provides additional mechanical protection compared to the 2-wall shrouding of the Samtec part.

Q: What are the differences in shrouding between these two parts?

A: The TSSH-105-01-L-DV features 2-wall shrouding, while the N2510-6V0C-RB-WD features 4-wall shrouding. Four-wall shrouding provides enhanced lateral protection and guidance during mating operations.

Q: Are the contact finishes compatible?

A: Both parts use gold-plated mating contacts and tin-plated posts, ensuring compatible electrical performance and solderability.

Q: What packaging options are available?

A: The TSSH-105-01-L-DV is supplied in tube packaging. The N2510-6V0C-RB-WD is available in cut tape and Digi-Reel® formats, which may offer advantages for automated assembly processes.

Q: Do both parts meet RoHS requirements?

A: Yes. The TSSH-105-01-L-DV is ROHS3 compliant, and the N2510-6V0C-RB-WD is RoHS compliant. Both parts are suitable for RoHS-regulated applications.