TSS-132-02-S-D Equivalent & Substitute Parts

Part Overview

The TSS-132-02-S-D is a rectangular connector header manufactured by Samtec Inc., designed for through-hole mounting applications. This shrouded 64-position connector operates across the -55°C to 125°C temperature range and features a 0.100" (2.54mm) pitch configuration with male pin contacts. The part is currently active in production with ROHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component interchangeability in board-to-board or cable interconnect applications.

Substiute Parts

TSS-132-02-S-D

Samtec Inc.In Stock: 1074TSS-132-02-S-D Datasheet

Current PartRFQ

HTSS-132-02-S-D

Samtec Inc.In Stock: 945HTSS-132-02-S-D Datasheet

SimilarRFQ

TST-132-02-S-D

Samtec Inc.In Stock: 855TST-132-02-S-D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TSS-132-02-S-D are identified based on strict alignment of critical electrical and mechanical parameters. The following parameters must match or remain equivalent for substitution eligibility:

• Connector Type: Header
• Contact Type: Male Pin
• Number of Positions: 64
• Number of Rows: 2
• Pitch - Mating: 0.100" (2.54mm)
• Row Spacing - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole
• Shrouding: Shrouded - 4 Wall
• Fastening Type: Push-Pull
• Contact Finish - Mating: Gold
• Contact Finish - Post: Tin
• Contact Material: Phosphor Bronze
• Operating Temperature: -55°C ~ 125°C
• Material Flammability Rating: UL94 V-0
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Variations in insulation material (PBT versus LCP) and application style (Board to Board versus Board to Cable/Wire) are permitted within the substitute group, as these do not affect the core mating interface or electrical performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

All three parts—TSS-132-02-S-D, HTSS-132-02-S-D, and TST-132-02-S-D—maintain active product status with ROHS3 compliance and identical operating temperature ranges. Selection between these parts depends on application-specific requirements:

The TSS-132-02-S-D and HTSS-132-02-S-D are functionally equivalent for board-to-board or cable interconnect applications. The primary difference is insulation material composition: TSS-132-02-S-D uses standard PBT, while HTSS-132-02-S-D uses Liquid Crystal Polymer (LCP). Both materials meet UL94 V-0 flammability requirements and support the full operating temperature range.

The TST-132-02-S-D is specified for board-to-cable/wire applications and includes a documented current rating of 3.4A per contact. Its insulation material is glass-filled PBT, providing enhanced mechanical properties. This part is suitable for applications requiring explicit current capacity documentation.

All parts carry identical contact geometry, pitch specifications, and electrical interface characteristics, ensuring mechanical and electrical interchangeability within their respective application categories.

Frequently Asked Questions (FAQ)

Q: Can TSS-132-02-S-D be directly replaced with HTSS-132-02-S-D?

A: Yes. Both parts share identical connector type, contact configuration, pitch, mounting method, and operating temperature range. The insulation material difference (PBT versus LCP) does not affect mating interface compatibility or electrical performance. Physical dimensions and contact geometry remain equivalent.

Q: What is the primary difference between TST-132-02-S-D and the other substitutes?

A: TST-132-02-S-D is specified for board-to-cable/wire applications, whereas TSS-132-02-S-D and HTSS-132-02-S-D support board-to-board or cable configurations. Additionally, TST-132-02-S-D includes a documented current rating of 3.4A per contact. The insulation material is glass-filled PBT rather than standard PBT or LCP.

Q: Are all three parts ROHS3 compliant?

A: Yes. TSS-132-02-S-D, HTSS-132-02-S-D, and TST-132-02-S-D all carry ROHS3 compliance certification with MSL rating of 1 (Unlimited).

Q: Do insulation material differences affect electrical performance?

A: No. PBT, LCP, and glass-filled PBT all meet the specified UL94 V-0 flammability rating and support the -55°C to 125°C operating temperature range. Material selection is driven by mechanical and thermal requirements rather than electrical characteristics.

Q: Can TST-132-02-S-D be used in board-to-board applications?

A: TST-132-02-S-D is specified for board-to-cable/wire applications. While the connector geometry permits physical mating in board-to-board configurations, the part designation and design intent target cable interconnect use. For board-to-board applications, TSS-132-02-S-D or HTSS-132-02-S-D are the appropriate selections.

Q: What is the significance of the keying slot feature?

A: The keying slot prevents incorrect mating orientation, ensuring proper connector alignment during assembly. This feature is present on all three substitute parts.

Q: Are there inventory considerations for part selection?

A: TSS-132-02-S-D has 996 units in stock, HTSS-132-02-S-D has 932 units, and TST-132-02-S-D has 785 units available. Inventory levels may influence procurement decisions based on project timeline requirements.