TSS-113-01-L-D-26 Equivalent & Substitute Parts

Part Overview

The TSS-113-01-L-D-26 is a shrouded rectangular connector header manufactured by Samtec Inc. in the Flex Stack TSS series. This through-hole mounted component features 26 positions arranged in 2 rows with 0.100" (2.54mm) pitch spacing, designed for board-to-board or cable connections. The part is currently active in production with ROHS3 compliance and UL94 V-0 flammability rating. Substitute parts are identified when equivalent electrical and mechanical parameters align with application requirements, enabling component interchangeability in designs where packaging or series variation is acceptable.

Substiute Parts

TSS-113-01-L-D-26

Samtec Inc.In Stock: 1163TSS-113-01-L-D-26 Datasheet

Current PartRFQ

TST-113-01-L-D-21

Samtec Inc.In Stock: 858TST-113-01-L-D-21 Datasheet

SimilarRFQ

TST-113-01-L-D-26

Samtec Inc.In Stock: 764TST-113-01-L-D-26 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TSS-113-01-L-D-26 are identified based on matching the following critical parameters:

• Connector type (Header)
• Contact type (Male Pin)
• Number of positions (26)
• Number of rows (2)
• Pitch spacing (0.100" / 2.54mm)
• Row spacing (0.100" / 2.54mm)
• Mounting type (Through Hole)
• Termination method (Solder)
• Shrouding configuration (Shrouded - 4 Wall)
• Contact material (Phosphor Bronze)
• Contact finish - mating (Gold)
• Operating temperature range (-55°C ~ 125°C)
• Compliance standards (ROHS3, UL94 V-0)

The identified substitutes TST-113-01-L-D-21 and TST-113-01-L-D-26 maintain these core parameters while differing in series designation (TST vs. TSS), packaging format (Bulk vs. Tube), and insulation material composition (glass-filled PBT variant).

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain active product status with ROHS3 compliance and UL94 V-0 flammability certification. The TSS-113-01-L-D-26 and its TST-series substitutes are electrically and mechanically equivalent across all critical mating and mounting parameters.

The primary distinction between the main part and substitutes is the series designation (TSS vs. TST) and packaging format. The TSS-113-01-L-D-26 is supplied in tube packaging, while TST-113-01-L-D-21 and TST-113-01-L-D-26 are supplied in bulk packaging. The TST variants incorporate glass-filled PBT insulation material compared to standard PBT in the TSS variant.

Selection between these parts depends on application requirements for packaging format and insulation material composition. All parts support identical connector interface specifications, operating temperature ranges, and compliance certifications.

Frequently Asked Questions (FAQ)

Q: Can TST-113-01-L-D-21 and TST-113-01-L-D-26 be used interchangeably with TSS-113-01-L-D-26?

A: Yes. All three parts share identical connector type, contact configuration, pitch spacing, mounting method, and operating temperature range. The TST variants are direct functional equivalents with differences limited to series designation, packaging format, and insulation material composition.

Q: What is the difference between the two TST substitute parts?

A: TST-113-01-L-D-21 and TST-113-01-L-D-26 are both from the Flex Stack TST series with identical electrical and mechanical specifications. Both are supplied in bulk packaging with glass-filled PBT insulation. The part number suffix indicates internal design variations within the TST series.

Q: Does the glass-filled PBT insulation in TST variants affect compatibility?

A: No. Glass-filled PBT maintains the same mechanical interface and electrical performance as standard PBT. The material enhancement provides improved dimensional stability and mechanical properties while preserving all connector interface specifications.

Q: What packaging format differences exist between these parts?

A: The TSS-113-01-L-D-26 is supplied in tube packaging, while TST-113-01-L-D-21 and TST-113-01-L-D-26 are supplied in bulk packaging. Packaging format does not affect connector performance or compatibility.

Q: Are all three parts ROHS3 compliant?

A: Yes. All parts carry ROHS3 compliance certification and UL94 V-0 flammability rating, meeting equivalent regulatory requirements.

Q: What is the current rating for these connectors?

A: The TSS-113-01-L-D-26 does not specify a current rating in the provided data. The TST variants specify 3.4A per contact. Consult detailed datasheets for complete electrical specifications.