TSS-106-01-G-D Equivalent & Substitute Parts

Part Overview

The TSS-106-01-G-D is a rectangular connector header manufactured by Samtec Inc., designed for through-hole board-to-board or cable applications. This 12-position, 2-row connector operates across industrial temperature ranges and meets RoHS3 compliance requirements. The part is currently active in production with 699 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component interchangeability in applications where form factor and connection interface requirements are met.

Substiute Parts

TSS-106-01-G-D

Samtec Inc.In Stock: 806TSS-106-01-G-D Datasheet

Current PartRFQ

TST-106-01-G-D

Samtec Inc.In Stock: 1104TST-106-01-G-D Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TSS-106-01-G-D is determined by strict alignment of the following critical parameters:

• Connector Type & Contact Configuration: Header with male pins
• Position Count & Row Configuration: 12 positions arranged in 2 rows
• Pitch Specifications: 0.100" (2.54mm) mating pitch and row spacing
• Mounting & Termination: Through-hole solder termination
• Shrouding Design: Shrouded 4-wall construction
• Contact Material & Finish: Phosphor bronze with gold mating surface
• Insulation Material: Polybutylene Terephthalate (PBT)
• Temperature & Compliance: Operating range -55°C to 125°C, UL94 V-0, ROHS3 Compliant

The TST-106-01-G-D meets all these criteria and is classified as an equivalent substitute. The primary distinction lies in the connector style designation (TSS vs. TST series) and insulation material composition (PBT vs. PBT Glass Filled), which do not affect electrical or mechanical interchangeability within the specified parameter envelope.

Parameter Comparison

Engineering Selection Recommendations

Both the TSS-106-01-G-D and TST-106-01-G-D are active production parts manufactured by Samtec Inc. and meet identical compliance requirements including ROHS3 and UL94 V-0 flammability ratings. The parts share all critical electrical and mechanical parameters necessary for direct substitution in through-hole applications requiring 12-position, 2.54mm pitch connectors.

The TST-106-01-G-D offers the additional specification of 3.4A per contact current rating and glass-filled PBT insulation material, which may provide enhanced mechanical properties in specific thermal or mechanical stress environments. Selection between these parts should be based on application-specific requirements for current handling capacity and insulation material composition, with both parts maintaining full compatibility across the specified operating temperature range of -55°C to 125°C.

Frequently Asked Questions (FAQ)

Q: Can TST-106-01-G-D be used as a direct replacement for TSS-106-01-G-D?

A: Yes. Both parts share identical pitch (0.100" / 2.54mm), position count (12), row configuration (2 rows), mounting type (through-hole), termination method (solder), shrouding design (4-wall), contact materials, and operating temperature range. The parts are mechanically and electrically interchangeable.

Q: What is the difference between the TSS and TST series designations?

A: The series designation reflects different connector style classifications within Samtec's Flex Stack product line. TSS is designated for board-to-board or cable applications, while TST is designated for board-to-cable/wire applications. Both maintain identical contact geometry and pitch specifications.

Q: Does the glass-filled PBT insulation in the TST-106-01-G-D affect compatibility?

A: No. Glass-filled PBT is a material composition variant that does not alter the connector's electrical or mechanical interface parameters. It may provide enhanced rigidity and thermal stability but does not impact pin spacing, contact configuration, or mating characteristics.

Q: Is the current rating specification relevant for substitution?

A: The TST-106-01-G-D specifies 3.4A per contact, while the TSS-106-01-G-D does not provide a current rating specification. If your application requires explicit current rating documentation, the TST-106-01-G-D provides this parameter. Both parts are suitable for standard signal and low-power applications within the specified contact geometry.

Q: Are both parts RoHS3 compliant?

A: Yes. Both TSS-106-01-G-D and TST-106-01-G-D are ROHS3 compliant and meet UL94 V-0 flammability requirements, suitable for applications requiring environmental and safety compliance certifications.