TSM9409CS RLG P-Channel MOSFET 60V 3.5A Equivalent & Substitute Parts

Part Overview

The TSM9409CS RLG is a P-Channel Metal Oxide Semiconductor Field Effect Transistor (MOSFET) rated for 60V drain-to-source voltage with a continuous drain current of 3.5A at 25°C. This surface mount device is packaged in an 8-SOP configuration and dissipates a maximum of 3W. The main part number TSM9409CS RLG is classified as "Not For New Designs," indicating it has reached end-of-life status. Identifying equivalent substitute parts with identical electrical and mechanical specifications is necessary to maintain design continuity and ensure component availability for existing applications and legacy system support.

Substiute Parts

TSM9409CS RLG

Taiwan Semiconductor CorporationIn Stock: 2172TSM9409CS RLG Datasheet

Current PartRFQ

TSM9409CS

Taiwan Semiconductor CorporationIn Stock: 5906TSM9409CS Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TSM9409CS RLG is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part must match the following criteria:

Electrical Parameters (Must Match Exactly):

• FET Type: P-Channel
• Technology: MOSFET (Metal Oxide)
• Drain to Source Voltage (Vdss): 60V
• Continuous Drain Current (Id) @ 25°C: 3.5A (Ta)
• Rds On (Max) @ 3.5A, 10V: 155mOhm
• Gate Threshold Voltage (Vgs(th)) @ 250µA: 1V (Max)
• Gate Charge (Qg) @ 10V: 6nC (Max)
• Maximum Gate Voltage (Vgs): ±20V
• Input Capacitance (Ciss) @ 30V: 540pF (Max)
• Power Dissipation (Max): 3W (Ta)
• Operating Temperature Range: -55°C to 150°C (TJ)

Mechanical Parameters (Must Match Exactly):

• Mounting Type: Surface Mount
• Package / Case: 8-SOIC (0.154", 3.90mm Width)
• Supplier Device Package: 8-SOP

Compliance Parameters (Must Match Exactly):

• RoHS Status: ROHS3 Compliant
• REACH Status: REACH Unaffected

The substitute part TSM9409CS meets all these criteria and is therefore a direct parametric equivalent. The only difference between the main part and the substitute is the packaging format (Cut Tape versus Tape & Reel) and product status classification.

Parameter Comparison

Engineering Selection Recommendations

The TSM9409CS (Tape & Reel packaging) is a direct parametric equivalent to the TSM9409CS RLG (Cut Tape packaging). Both parts share identical electrical specifications, mechanical dimensions, and compliance certifications. The substitute part carries an "Active" product status classification, indicating ongoing manufacturer support and availability, whereas the main part is classified as "Not For New Designs."

For applications requiring the TSM9409CS RLG specifications, the TSM9409CS substitute part is suitable for direct replacement. The difference in packaging format (Tape & Reel versus Cut Tape) does not affect electrical performance or mechanical compatibility in the application circuit. The active status of the substitute part ensures long-term component availability and supply chain continuity.

Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements for electronic component use in regulated industries and markets.

Frequently Asked Questions (FAQ)

Q: Can the TSM9409CS (Tape & Reel) be used as a direct replacement for the TSM9409CS RLG (Cut Tape)?

A: Yes. Both parts are electrically and mechanically identical. The only difference is the packaging format. Tape & Reel packaging is standard for high-volume manufacturing and automated assembly processes, while Cut Tape is used for lower-volume or manual assembly applications. The component itself functions identically in the circuit.

Q: What is the significance of the "Not For New Designs" status on the main part?

A: This classification indicates the TSM9409CS RLG has reached end-of-life status and the manufacturer no longer recommends its use in new product designs. The substitute part TSM9409CS carries an "Active" status, meaning it is currently manufactured and supported by Taiwan Semiconductor Corporation.

Q: Are the electrical parameters identical between the two parts?

A: Yes. All electrical parameters are identical, including Vdss (60V), continuous drain current (3.5A), Rds On (155mOhm @ 3.5A, 10V), gate threshold voltage (1V @ 250µA), gate charge (6nC @ 10V), and operating temperature range (-55°C to 150°C).

Q: Does the package size remain the same?

A: Yes. Both parts use the 8-SOIC package with 0.154" width (3.90mm). The physical footprint and pin configuration are identical, ensuring compatibility with existing PCB layouts and assembly equipment.

Q: Are there any compliance differences between the two parts?

A: No. Both parts maintain ROHS3 compliance and REACH unaffected status. There are no differences in regulatory or environmental compliance certifications.

Q: What is the difference between Cut Tape and Tape & Reel packaging?

A: Cut Tape (CT) packaging provides individual component strips cut to specific lengths, typically used for small-quantity orders or manual assembly. Tape & Reel (TR) packaging provides components on continuous tape wound on reels, optimized for high-speed automated assembly equipment. The components themselves are identical.

Q: Is the substitute part available in higher quantities?

A: Yes. The substitute part TSM9409CS (Tape & Reel) has 5870 pieces in stock, compared to 2109 pieces for the main part TSM9409CS RLG (Cut Tape). The higher inventory level reflects the active status and ongoing production of the substitute part.