TSM60N06CP ROG N-Channel MOSFET 60V 66A TO-252 Equivalent & Substitute Parts

Part Overview

The TSM60N06CP ROG is an N-Channel MOSFET manufactured by Taiwan Semiconductor Corporation, rated for 60V drain-to-source voltage and 66A continuous drain current in a TO-252 (DPAK) surface mount package. This device is classified as obsolete, necessitating identification of equivalent and substitute components for ongoing design support and production requirements. The part operates across a temperature range of -55°C to 150°C and complies with RoHS3 and REACH standards.

Substiute Parts

TSM60N06CP ROG

Taiwan Semiconductor CorporationIn Stock: 1155TSM60N06CP ROG Datasheet

Current PartRFQ

FDD86569-F085

onsemiIn Stock: 17657FDD86569-F085 Datasheet

SimilarRFQ

IPD90N06S407ATMA2

Infineon TechnologiesIn Stock: 33064IPD90N06S407ATMA2 Datasheet

SimilarRFQ

IPD90N06S4L06ATMA2

Infineon TechnologiesIn Stock: 4549IPD90N06S4L06ATMA2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TSM60N06CP ROG is determined by strict alignment of the following electrical and mechanical parameters:

Critical Matching Parameters:

• FET Type: N-Channel
• Drain to Source Voltage (Vdss): 60V
• Package Type: TO-252 (DPAK) surface mount
• Mounting Type: Surface Mount
• RoHS3 Compliance

Performance Consideration Parameters:

• Continuous Drain Current (Id): Substitute parts must equal or exceed 66A
• Rds On (Max): Lower or equal values indicate improved performance
• Gate Charge (Qg): Lower values reduce switching losses
• Power Dissipation: Higher ratings provide design margin
• Operating Temperature Range: Must encompass or exceed -55°C to 150°C

The three substitute parts identified—FDD86569-F085, IPD90N06S407ATMA2, and IPD90N06S4L06ATMA2—satisfy all critical matching parameters. All three devices feature 60V Vdss rating, N-Channel configuration, TO-252 package format, and RoHS3 compliance. Each substitute provides equal or superior continuous drain current ratings (90A) compared to the original 66A specification.

Parameter Comparison

Engineering Selection Recommendations

FDD86569-F085 (onsemi PowerTrench®)

This substitute is rated for 90A continuous drain current with 5.7 mOhm Rds On, representing improved on-resistance performance. The device carries Last Time Buy status, indicating limited future availability. It includes AEC-Q101 automotive qualification and operates to 175°C, extending the upper temperature range beyond the original part. Power dissipation capability reaches 150W (Tj), providing substantial thermal margin. This part is suitable for applications requiring enhanced current handling and thermal performance within automotive-qualified environments.

IPD90N06S407ATMA2 (Infineon OptiMOS™)

This substitute provides 90A continuous drain current with 6.9 mOhm Rds On and maintains Active product status, ensuring long-term availability. The device features AEC-Q101 automotive qualification and operates across -55°C to 175°C. Gate charge is reduced to 56 nC, lowering switching losses compared to the original part. Power dissipation reaches 79W (Tc). This part is appropriate for applications requiring sustained component availability with automotive-grade reliability.

IPD90N06S4L06ATMA2 (Infineon OptiMOS™)

This substitute delivers 90A continuous drain current with 6.3 mOhm Rds On, the lowest on-resistance among the three substitutes. It maintains Active product status and includes AEC-Q101 automotive qualification with operation to 175°C. The gate threshold voltage is reduced to 2.2V, enabling lower gate drive requirements. Power dissipation capability is 79W (Tc). This part is optimal for applications prioritizing minimal on-resistance losses and reduced gate drive complexity.

Frequently Asked Questions (FAQ)

Q: Can the TSM60N06CP ROG be directly replaced with any of these substitute parts?

A: Yes. All three substitute parts share identical critical parameters: 60V Vdss rating, N-Channel configuration, TO-252 (DPAK) package format, and RoHS3 compliance. Electrical and mechanical compatibility is established through these matching specifications.

Q: What is the primary difference between the three substitute options?

A: The substitutes differ in on-resistance performance, gate charge characteristics, and product status. FDD86569-F085 offers the lowest on-resistance (5.7 mOhm) and highest power dissipation (150W) but carries Last Time Buy status. IPD90N06S407ATMA2 and IPD90N06S4L06ATMA2 maintain Active status with comparable performance, with IPD90N06S4L06ATMA2 providing the lowest on-resistance (6.3 mOhm) and reduced gate threshold voltage (2.2V).

Q: Are all substitute parts automotive-qualified?

A: Yes. FDD86569-F085, IPD90N06S407ATMA2, and IPD90N06S4L06ATMA2 all carry AEC-Q101 automotive qualification. The original TSM60N06CP ROG does not specify automotive qualification.

Q: What is the significance of the Last Time Buy status for FDD86569-F085?

A: Last Time Buy status indicates that onsemi has announced end-of-life for this component. While currently available in inventory (17,550 pcs), future procurement will not be possible after the designated cutoff date. For long-term production requirements, the Infineon alternatives with Active status are preferred.

Q: Do the substitute parts require different PCB layout or thermal management?

A: All substitute parts use the TO-252 (DPAK) package format with identical pin configuration and thermal tab design. PCB layout compatibility is maintained. However, the higher power dissipation ratings of the substitutes (79W to 150W versus 44.6W) allow for reduced thermal management requirements or improved thermal margin in existing designs.

Q: Which substitute part offers the best performance for high-frequency switching applications?

A: IPD90N06S4L06ATMA2 provides the lowest gate charge (75 nC) among the Infineon options and the lowest gate threshold voltage (2.2V), reducing switching losses and gate drive complexity. However, FDD86569-F085 offers the lowest gate charge overall (52 nC), making it optimal for high-frequency applications if long-term availability is not a constraint.

Q: Are there any differences in moisture sensitivity or handling requirements?

A: All four parts, including the original TSM60N06CP ROG and all three substitutes, carry MSL (Moisture Sensitivity Level) rating of 1 (Unlimited), indicating no moisture sensitivity restrictions. Handling and storage requirements are identical.