TSM2N60ECP ROG N-Channel 600V 2A MOSFET Equivalent & Substitute Parts

Part Overview

The TSM2N60ECP ROG is an N-Channel 600V 2A MOSFET manufactured by Taiwan Semiconductor Corporation in a Surface Mount TO-252 (DPAK) package. This device is classified as obsolete, necessitating identification of equivalent and substitute components for ongoing applications and new designs. The part operates across a temperature range of -55°C to 150°C and dissipates a maximum of 52.1W at the case temperature. Due to its obsolete status, alternative parts with matching or superior electrical characteristics are required to maintain design continuity and ensure component availability.

Key Parameters

Parameter	Value	Unit
FET Type	N-Channel	—
Drain to Source Voltage (Vdss)	600	V
Continuous Drain Current (Id) @ 25°C	2	A
Rds On (Max) @ 1A, 10V	4	Ohm
Gate Threshold Voltage (Vgs(th)) @ 250µA	5	V
Gate Charge (Qg) @ 10V	9.5	nC
Input Capacitance (Ciss) @ 25V	362	pF
Power Dissipation (Max)	52.1	W
Operating Temperature Range	-55 to 150	°C
Mounting Type	Surface Mount	—
Package	TO-252 (DPAK)	—
RoHS Status	ROHS3 Compliant	—

Substitute Part Grouping Explanation

Substitution of the TSM2N60ECP ROG is determined by strict adherence to the following electrical and mechanical parameters:

Critical Matching Parameters:

FET Type: N-Channel topology
Drain to Source Voltage (Vdss): 600V minimum
Continuous Drain Current (Id): 2A minimum at 25°C
Mounting Type: Surface Mount
Package: TO-252 (DPAK) form factor
Gate Drive Voltage: 10V maximum Rds On specification
Operating Temperature Range: -55°C to 150°C minimum

Acceptable Variation Parameters:

Rds On (Max): Equal to or lower than 4.4 Ohm @ 1A, 10V
Gate Threshold Voltage (Vgs(th)): 4V to 5V @ 250µA
Gate Charge (Qg): Up to 11 nC @ 10V
Input Capacitance (Ciss): Up to 415 pF @ 25V
Power Dissipation: Equal to or greater than 44W

Substitute parts must maintain electrical compatibility within these parameters while meeting RoHS3 compliance and REACH unaffected status.

Parameter Comparison

Parameter	TSM2N60ECP ROG	TSM2NB60CP ROG	AOD2N60	CDM3-800 TR13 PBFREE
Manufacturer	Taiwan Semiconductor	Taiwan Semiconductor	Alpha & Omega Semiconductor	Central Semiconductor
Product Status	Obsolete	Active	Not For New Designs	Active
FET Type	N-Channel	N-Channel	N-Channel	N-Channel
Vdss (V)	600	600	600	800
Id @ 25°C (A)	2	2	2	3
Rds On (Max) @ 1A, 10V (Ohm)	4	4.4	4.4	4.8
Vgs(th) @ 250µA (V)	5	4.5	4.5	4
Gate Charge @ 10V (nC)	9.5	9.4	11	11.3
Ciss @ 25V (pF)	362	249	325	415
Power Dissipation (W)	52.1	44	56.8	80
Operating Temperature (°C)	-55 to 150	-55 to 150	-50 to 150	-55 to 150
Package	TO-252 (DPAK)	TO-252 (DPAK)	TO-252 (DPAK)	DPAK
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL Rating	3 (168 Hours)	3 (168 Hours)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

Primary Substitute: TSM2NB60CP ROG

The TSM2NB60CP ROG is the manufacturer-recommended substitute for the obsolete TSM2N60ECP ROG. Both devices are manufactured by Taiwan Semiconductor Corporation and share identical electrical specifications for Vdss (600V), Id (2A), and operating temperature range (-55°C to 150°C). The TSM2NB60CP ROG maintains ROHS3 compliance and REACH unaffected status. This part is currently in active production status with 5,646 units in stock, ensuring long-term availability. The TSM2NB60CP ROG exhibits slightly lower power dissipation (44W versus 52.1W) and reduced input capacitance (249 pF versus 362 pF), both favorable characteristics for thermal management and switching performance. Rds On specification increases marginally from 4 Ohm to 4.4 Ohm, remaining within acceptable substitution parameters.

Secondary Substitute: AOD2N60

The AOD2N60 manufactured by Alpha & Omega Semiconductor Inc. provides electrical equivalence at the 600V, 2A specification level. This device maintains identical Vdss and Id ratings with matching Rds On (4.4 Ohm) and gate threshold voltage (4.5V). The AOD2N60 is classified as "Not For New Designs," limiting its application to legacy system maintenance and repair scenarios. The device carries ROHS3 compliance and features superior moisture sensitivity rating (MSL 1 unlimited versus MSL 3). Power dissipation capability (56.8W) exceeds the original part specification. The AOD2N60 is available with 6,796 units in stock.

Tertiary Substitute: CDM3-800 TR13 PBFREE

The CDM3-800 TR13 PBFREE manufactured by Central Semiconductor Corp represents a higher-specification alternative with elevated voltage (800V) and current (3A) ratings. This device is suitable for applications requiring enhanced performance margins or where higher voltage tolerance is beneficial. The CDM3-800 maintains ROHS3 compliance and features MSL 1 rating. Operating temperature range (-55°C to 150°C) matches the original specification. The elevated Vdss and Id ratings provide design flexibility for future upgrades or applications with increased electrical demands. This part is in active production with 1,153 units available.

Frequently Asked Questions (FAQ)

Q: Can the TSM2NB60CP ROG directly replace the TSM2N60ECP ROG without circuit modification?

A: Yes. The TSM2NB60CP ROG maintains identical Vdss (600V), Id (2A), and operating temperature specifications. Both devices use TO-252 (DPAK) packaging and share the same gate drive voltage (10V). The marginal increase in Rds On (4.4 Ohm versus 4 Ohm) and reduction in input capacitance (249 pF versus 362 pF) are within acceptable substitution parameters and do not require circuit redesign.

Q: What is the significance of the "Not For New Designs" status of the AOD2N60?

A: This designation indicates that Alpha & Omega Semiconductor Inc. does not recommend the AOD2N60 for new product development. The part remains available for legacy system support and repair applications. For new designs, the TSM2NB60CP ROG (active status) is the preferred selection.

Q: Why does the CDM3-800 have higher voltage and current ratings than the original part?

A: The CDM3-800 is a higher-specification device (800V, 3A) compared to the TSM2N60ECP ROG (600V, 2A). This part functions as a performance-enhanced substitute suitable for applications requiring increased electrical margins or future design upgrades. The elevated ratings do not preclude its use in 600V, 2A applications, provided circuit design accommodates the different electrical characteristics.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. The TSM2NB60CP ROG, AOD2N60, and CDM3-800 TR13 PBFREE are all ROHS3 compliant and REACH unaffected, matching the environmental compliance status of the original TSM2N60ECP ROG.

Q: What is the difference in moisture sensitivity between the substitute parts?

A: The TSM2N60ECP ROG and TSM2NB60CP ROG carry MSL 3 rating (168 hours maximum floor life). The AOD2N60 and CDM3-800 carry MSL 1 rating (unlimited floor life). MSL 1 rated components offer superior moisture tolerance and extended handling flexibility during assembly and storage operations.

Q: Can the CDM3-800 be used in all applications where the TSM2N60ECP ROG is specified?

A: The CDM3-800 is electrically compatible at the 600V, 2A operating point due to its higher ratings (800V, 3A). However, the elevated input capacitance (415 pF versus 362 pF) and gate charge (11.3 nC versus 9.5 nC) may affect switching speed and gate drive requirements in high-frequency applications. Circuit validation is necessary for applications with stringent switching performance requirements.

Q: What packaging considerations apply to these substitute parts?

A: All substitute parts use TO-252 (DPAK) surface mount packaging, maintaining mechanical and thermal interface compatibility with the original TSM2N60ECP ROG. PCB layout and thermal management designs require no modification for direct substitution.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message