TSM130NB06LCR MOSFET N-Channel 60V Equivalent & Substitute Parts

Part Overview

The TSM130NB06LCR is an N-Channel Metal Oxide Semiconductor Field Effect Transistor (MOSFET) manufactured by Taiwan Semiconductor Corporation. This device operates at 60V drain-to-source voltage with continuous drain current ratings of 10A at ambient temperature (Ta) and 51A at case temperature (Tc). The component is housed in an 8-PDFN (5.2x5.75mm) surface mount package and is classified as Active product status. Equivalent and substitute parts are identified when design requirements necessitate alternative packaging formats, inventory availability, or sourcing from different manufacturers while maintaining electrical and mechanical compatibility within specified parameter tolerances.

Key Parameters

Parameter	Value	Unit
FET Type	N-Channel	—
Technology	MOSFET (Metal Oxide)	—
Drain to Source Voltage (Vdss)	60	V
Continuous Drain Current @ 25°C (Ta)	10	A
Continuous Drain Current @ 25°C (Tc)	51	A
Rds On (Max) @ 10A, 10V	13	mOhm
Vgs(th) (Max) @ 250µA	2.5	V
Gate Charge (Qg) (Max) @ 10V	37	nC
Vgs (Max)	±20	V
Input Capacitance (Ciss) (Max) @ 30V	2175	pF
Power Dissipation (Max) @ Ta	3.1	W
Power Dissipation (Max) @ Tc	83	W
Operating Temperature Range (TJ)	-55 to 175	°C
Mounting Type	Surface Mount	—
Package / Case	8-PowerLDFN	—
Supplier Device Package	8-PDFN (5.2x5.75)	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—
REACH Status	REACH Unaffected	—
Product Status	Active	—

Substitute Part Grouping Explanation

Substitute parts for the TSM130NB06LCR are identified based on electrical parameter equivalence and mechanical compatibility. The substitution logic is structured into two categories:

Parametric Equivalent (Identical Electrical Specifications): The TSM130NB06LCR RLG represents a direct parametric equivalent with identical electrical characteristics. This variant differs only in packaging format (Tape & Reel versus bulk packaging) and is sourced from the same manufacturer. All electrical parameters including Vdss (60V), continuous drain current (10A Ta / 51A Tc), Rds On (13mOhm @ 10A, 10V), gate charge (37nC @ 10V), and operating temperature range (-55°C to 175°C) are identical.

Similar Manufacturer Part (Cross-Functional Substitute): The DMT6015LPS-13 from Diodes Incorporated is classified as a similar manufacturer part. This device maintains the same Vdss rating (60V), comparable continuous drain current specifications (10.6A Ta / 31A Tc), and identical gate threshold voltage (2.5V @ 250µA). The device operates within the same temperature range (-55°C to 150°C) and shares the same RoHS3 compliance and MSL rating. Differences exist in Rds On (16mOhm versus 13mOhm), gate charge (18.9nC versus 37nC), maximum gate voltage (±16V versus ±20V), input capacitance (1103pF versus 2175pF), and package format (PowerDI5060-8 versus 8-PDFN).

Key parameters determining substitution eligibility are: Drain-to-Source Voltage (Vdss), Continuous Drain Current ratings, Gate Threshold Voltage, Operating Temperature Range, RoHS compliance status, and Moisture Sensitivity Level.

Parameter Comparison

Parameter	TSM130NB06LCR	TSM130NB06LCR RLG	DMT6015LPS-13	Unit
Manufacturer	Taiwan Semiconductor Corporation	Taiwan Semiconductor Corporation	Diodes Incorporated	—
FET Type	N-Channel	N-Channel	N-Channel	—
Technology	MOSFET (Metal Oxide)	MOSFET (Metal Oxide)	MOSFET (Metal Oxide)	—
Drain to Source Voltage (Vdss)	60	60	60	V
Continuous Drain Current @ Ta	10	10	10.6	A
Continuous Drain Current @ Tc	51	51	31	A
Rds On (Max) @ 10A, 10V	13	13	16	mOhm
Vgs(th) (Max) @ 250µA	2.5	2.5	2.5	V
Gate Charge (Qg) (Max) @ 10V	37	37	18.9	nC
Vgs (Max)	±20	±20	±16	V
Input Capacitance (Ciss) (Max) @ 30V	2175	2175	1103	pF
Power Dissipation (Max) @ Ta	3.1	3.1	1.16	W
Power Dissipation (Max) @ Tc	83	83	—	W
Operating Temperature Range (TJ)	-55 to 175	-55 to 175	-55 to 150	°C
Mounting Type	Surface Mount	Surface Mount	Surface Mount	—
Package / Case	8-PowerLDFN	8-PowerLDFN	8-PowerTDFN	—
Supplier Device Package	8-PDFN (5.2x5.75)	8-PDFN (5.2x5.75)	PowerDI5060-8	—
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	—
REACH Status	REACH Unaffected	REACH Unaffected	REACH Unaffected	—
Product Status	Active	Active	Active	—

Engineering Selection Recommendations

TSM130NB06LCR RLG (Parametric Equivalent): This part is the direct equivalent for applications requiring the TSM130NB06LCR. Selection of this variant is appropriate when Tape & Reel packaging is required for automated assembly processes. Both parts maintain identical electrical specifications and are sourced from Taiwan Semiconductor Corporation with Active product status. RoHS3 compliance and MSL Level 1 rating are consistent across both variants. This substitution introduces no electrical or thermal performance changes.

DMT6015LPS-13 (Similar Manufacturer Part): This Diodes Incorporated MOSFET is suitable for applications where the primary design constraints are Vdss (60V) and gate threshold voltage (2.5V @ 250µA). The device maintains Active product status and identical RoHS3 and REACH compliance. Selection of this part is appropriate when the application can accommodate the following parameter differences: reduced continuous drain current at case temperature (31A versus 51A), increased Rds On (16mOhm versus 13mOhm), reduced gate charge (18.9nC versus 37nC), lower maximum gate voltage (±16V versus ±20V), reduced input capacitance (1103pF versus 2175pF), and reduced maximum operating temperature (150°C versus 175°C). The PowerDI5060-8 package format differs from the 8-PDFN package and requires PCB layout modification.

All three parts are Active products with ROHS3 compliance and MSL Level 1 rating, supporting long-term design continuity and supply chain stability.

Frequently Asked Questions (FAQ)

Q: Can the TSM130NB06LCR RLG be used as a direct replacement for the TSM130NB06LCR?

A: Yes. The TSM130NB06LCR RLG is a parametric equivalent with identical electrical and thermal specifications. The only difference is packaging format: Tape & Reel versus bulk packaging. No circuit modifications or performance changes result from this substitution.

Q: What are the key differences between the TSM130NB06LCR and the DMT6015LPS-13?

A: Both devices share the same 60V Vdss rating and 2.5V gate threshold voltage. The DMT6015LPS-13 has higher Rds On (16mOhm versus 13mOhm), lower gate charge (18.9nC versus 37nC), lower maximum gate voltage (±16V versus ±20V), lower input capacitance (1103pF versus 2175pF), and lower maximum operating temperature (150°C versus 175°C). The continuous drain current at case temperature is also lower (31A versus 51A).

Q: Is the DMT6015LPS-13 suitable for high-temperature applications?

A: The DMT6015LPS-13 operates to a maximum junction temperature of 150°C, compared to 175°C for the TSM130NB06LCR. Applications requiring operation above 150°C require the TSM130NB06LCR or TSM130NB06LCR RLG.

Q: Do all three parts have the same RoHS and REACH compliance status?

A: Yes. All three parts are ROHS3 Compliant and REACH Unaffected, supporting equivalent environmental and regulatory compliance requirements.

Q: What is the impact of the different package formats on PCB design?

A: The TSM130NB06LCR and TSM130NB06LCR RLG use the 8-PDFN (5.2x5.75mm) package format. The DMT6015LPS-13 uses the PowerDI5060-8 package format. Different package footprints require separate PCB layout designs. Thermal performance characteristics may differ due to package geometry variations.

Q: Can the DMT6015LPS-13 handle the same power dissipation as the TSM130NB06LCR?

A: No. The DMT6015LPS-13 has a maximum power dissipation of 1.16W at ambient temperature, compared to 3.1W for the TSM130NB06LCR at ambient temperature and 83W at case temperature. Applications requiring higher power dissipation must use the TSM130NB06LCR or TSM130NB06LCR RLG.

Q: Are all three parts currently available?

A: Yes. All three parts maintain Active product status. Inventory availability varies: TSM130NB06LCR (4747 pcs), TSM130NB06LCR RLG (8604 pcs), and DMT6015LPS-13 (54212 pcs).

Q: What is the Moisture Sensitivity Level for these parts?

A: All three parts have MSL Level 1 (Unlimited), indicating no moisture sensitivity restrictions during storage and handling.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message