Equivalent & Substitute Parts Reference for TSM120N06LCP

Part Overview

TSM120N06LCP is an active N-Channel MOSFET manufactured by Taiwan Semiconductor Corporation. This device offers a drain-to-source voltage (Vdss) of 60V, continuous drain current ratings of 10A (Ta) and 70A (Tc), and is housed in a TO-252 (DPAK) surface-mount package. The part is RoHS3 compliant and has REACH unaffected status. In scenarios where alternative sourcing is necessary—such as supply chain constraints, lifecycle status changes, or application-specific requirements—identifying equivalent substitutes strictly within the defined electrical and mechanical characteristics is critical.

Key Parameters

Manufacturer Part Number	Category	Status	Drain to Source Voltage (Vdss)	Current - Continuous Drain (Id) @ 25°C	Rds On (Max) @ Id, Vgs	Vgs(th) (Max) @ Id	Gate Charge (Qg) (Max) @ Vgs	Vgs (Max)	Input Capacitance (Ciss) (Max) @ Vds	Power Dissipation (Max)	Operating Temperature	Mounting Type	Supplier Device Package	Package / Case	RoHS Status	REACH Status
TSM120N06LCP	Transistors, FETs, MOSFETs	Active	60V	10A (Ta), 70A (Tc)	12mOhm @ 10A, 10V	2.5V @ 250µA	37 nC @ 10 V	±20V	2118 pF @ 30 V	2.6W (Ta), 125W (Tc)	-55°C ~ 150°C (TJ)	Surface Mount	TO-252 (DPAK)	TO-252-3, DPAK (2 Leads + Tab), SC-63	ROHS3 Compliant	REACH Unaffected

Substitute Part Grouping Explanation

Substitute parts for TSM120N06LCP are grouped strictly according to the following parameters:

Drain to Source Voltage (Vdss)
Current - Continuous Drain (Id) @ 25°C
Rds On (Max) @ Id, Vgs
Gate Charge (Qg) (Max) @ Vgs
Vgs(th) (Max) @ Id
Vgs (Max)
Input Capacitance (Ciss) (Max) @ Vds
Power Dissipation (Max)
Operating Temperature
Mounting Type
Package / Case
RoHS and REACH Status

Only devices matching or closely adhering to these characteristics, as specified in the supplied data, are considered valid substitutes. Additional qualification is based on product status (active or not for new designs).

Parameter Comparison

Manufacturer Part Number	Status	Drain to Source Voltage (Vdss)	Current - Continuous Drain (Id) @ 25°C	Rds On (Max) @ Id, Vgs	Vgs(th) (Max) @ Id	Gate Charge (Qg) (Max) @ Vgs	Vgs (Max)	Input Capacitance (Ciss) (Max) @ Vds	Power Dissipation (Max)	Operating Temperature	Mounting Type	Supplier Device Package	Package / Case	RoHS Status	REACH Status
TSM120N06LCP	Active	60V	10A (Ta), 70A (Tc)	12mOhm @ 10A, 10V	2.5V @ 250µA	37 nC @ 10 V	±20V	2118 pF @ 30 V	2.6W (Ta), 125W (Tc)	-55°C ~ 150°C (TJ)	Surface Mount	TO-252 (DPAK)	TO-252-3, DPAK (2 Leads + Tab), SC-63	ROHS3 Compliant	REACH Unaffected
AUIRFR3806TRL	Not For New Designs	60V	43A (Tc)	15.8mOhm @ 25A, 10V	4V @ 50µA	30 nC @ 10 V	±20V	1150 pF @ 50 V	71W (Tc)	-55°C ~ 175°C (TJ)	Surface Mount	TO-252AA (DPAK)	TO-252-3, DPAK (2 Leads + Tab), SC-63	ROHS3 Compliant	REACH Unaffected
IPD50N06S2L13ATMA2	Active	55V	50A (Tc)	12.7mOhm @ 34A, 10V	2V @ 80µA	69 nC @ 10 V	±20V	1800 pF @ 25 V	136W (Tc)	-55°C ~ 175°C (TJ)	Surface Mount	PG-TO252-3-11	TO-252-3, DPAK (2 Leads + Tab), SC-63	ROHS3 Compliant	REACH Unaffected
IRFR3806TRPBF	Active	60V	43A (Tc)	15.8mOhm @ 25A, 10V	4V @ 50µA	30 nC @ 10 V	±20V	1150 pF @ 50 V	71W (Tc)	-55°C ~ 175°C (TJ)	Surface Mount	TO-252AA (DPAK)	TO-252-3, DPAK (2 Leads + Tab), SC-63	ROHS3 Compliant	REACH Unaffected

Engineering Selection Recommendations

When selecting substitutes for TSM120N06LCP, review the product status and compliance parameters. Only parts designated as “Active” and listed as ROHS3 compliant and REACH unaffected are suitable for direct replacement if lifecycle support and regulatory alignment are critical. AUIRFR3806TRL is not recommended for new designs due to its product status. IPD50N06S2L13ATMA2 and IRFR3806TRPBF are active, ROHS3 compliant, and REACH unaffected, thus suitable based on status and environmental compliance.

Frequently Asked Questions (FAQ)

Q1: What criteria determine whether a MOSFET is a valid substitute for TSM120N06LCP?
A1: Valid substitutes must match key electrical values: drain-to-source voltage (Vdss), current ratings, Rds On, gate threshold voltage (Vgs(th)), gate charge (Qg), power dissipation, and share mounting type and package specifications. Compliance with RoHS and REACH is also necessary.

Q2: Are all listed substitutes suitable for new production designs?
A2: Only parts with “Active” status—such as IPD50N06S2L13ATMA2 and IRFR3806TRPBF—are recommended for new designs.

Q3: Is the TO-252-3, DPAK package a strict substitution requirement?
A3: The package and mounting type must match to ensure mechanical compatibility. All substitutes listed use the TO-252-3, DPAK (or equivalent) surface mount format.

Q4: How should differences in continuous drain current and Rds On be handled?
A4: Selection should match application demands based on the provided current rating and Rds On values. Only the data provided in this reference should be used.

Q5: Are all substitute parts compliant with environmental regulations?
A5: All substitute parts listed are ROHS3 compliant and REACH unaffected, meeting required environmental certification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message