TSM-113-01-TM-DV-P-TR Equivalent & Substitute Parts

Part Overview

The TSM-113-01-TM-DV-P-TR is a surface mount rectangular connector header manufactured by Samtec Inc. This 26-position, 2-row connector operates across -55°C to 105°C and features phosphor bronze contacts with tin finish, housed in liquid crystal polymer insulation. The part is actively produced and ROHS3 compliant with UL94 V-0 flammability rating. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity for applications requiring identical electrical and mechanical interfaces.

Substiute Parts

TSM-113-01-TM-DV-P-TR

Samtec Inc.In Stock: 852TSM-113-01-TM-DV-P-TR Datasheet

Current PartRFQ

TSM-113-01-T-DV-P-TR

Samtec Inc.In Stock: 1244TSM-113-01-T-DV-P-TR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TSM-113-01-TM-DV-P-TR is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part TSM-113-01-T-DV-P-TR shares identical specifications in the following key areas:

• Number of positions and row configuration (26 positions, 2 rows)
• Mating pitch and row spacing (0.100" / 2.54mm)
• Contact type, material, and finish (Male pin, phosphor bronze, tin)
• Insulation material and height (Liquid crystal polymer, 0.100")
• Mounting type and termination method (Surface mount, solder)
• Operating temperature range (-55°C ~ 105°C)
• Compliance certifications (ROHS3, UL94 V-0, MSL 1)
• Connector series and base product number (TSM, TSM-113)

The substitute part differs only in the fastening type designation within the part number suffix, maintaining full functional and mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the TSM-113-01-TM-DV-P-TR and TSM-113-01-T-DV-P-TR are active products from Samtec Inc. with identical compliance certifications. Both parts maintain ROHS3 compliance and UL94 V-0 flammability rating, suitable for applications requiring regulatory adherence. The substitute part offers equivalent inventory availability (1139 pcs vs. 825 pcs), supporting procurement continuity. Selection between these parts should be based on design documentation requirements and part number specifications established during the design phase, as both deliver identical electrical and mechanical performance across all specified parameters.

Frequently Asked Questions (FAQ)

Q: Are TSM-113-01-TM-DV-P-TR and TSM-113-01-T-DV-P-TR mechanically interchangeable?

A: Yes. Both parts share identical mechanical dimensions, including 26-position configuration, 2.54mm pitch, 0.100" row spacing, and 0.230" mating contact length. PCB footprints and mounting requirements are identical.

Q: Do these parts have the same electrical performance?

A: Yes. Both parts use phosphor bronze contacts with tin finish, identical insulation material (LCP), and operate across the same temperature range (-55°C ~ 105°C). Electrical characteristics are equivalent.

Q: Are there compliance differences between these parts?

A: No. Both parts are ROHS3 compliant, carry UL94 V-0 flammability rating, and have MSL 1 (Unlimited) moisture sensitivity level.

Q: What is the difference between these part numbers?

A: The part numbers differ in the fastening type designation within the suffix. This distinction does not affect functional compatibility or performance specifications.

Q: Can I use TSM-113-01-T-DV-P-TR as a direct replacement in existing designs?

A: Yes, provided your design documentation and bill of materials allow for this part number substitution. Both parts deliver identical performance and fit.

Q: Are both parts available in the same packaging format?

A: Yes. Both parts are supplied in Tape & Reel (TR) packaging, supporting automated assembly processes.