TSM-108-01-L-SH-TR Equivalent & Substitute Parts

Part Overview

The TSM-108-01-L-SH-TR is an active rectangular connector header manufactured by Samtec Inc. This surface mount, right-angle connector features 8 positions at 0.100" (2.54mm) pitch with male pin contacts and solder termination. The connector is designed for board-to-board or cable applications with unshrouded construction and push-pull fastening. Finding equivalent or substitute parts may be necessary due to inventory constraints, packaging format requirements, or specific application needs while maintaining electrical and mechanical compatibility.

Substiute Parts

TSM-108-01-L-SH-TR

Samtec Inc.In Stock: 1199TSM-108-01-L-SH-TR Datasheet

Current PartRFQ

TSM-108-01-L-SH-A-TR

Samtec Inc.In Stock: 1592TSM-108-01-L-SH-A-TR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TSM-108-01-L-SH-TR is determined by strict equivalence across the following critical parameters:

• Connector Type: Header
• Contact Type: Male Pin
• Number of Positions: 8
• Number of Rows: 1
• Pitch - Mating: 0.100" (2.54mm)
• Mounting Type: Surface Mount, Right Angle
• Termination: Solder
• Fastening Type: Push-Pull
• Contact Finish - Mating: Gold
• Contact Material: Phosphor Bronze
• Insulation Material: Liquid Crystal Polymer (LCP)
• Operating Temperature: -55°C ~ 125°C
• Material Flammability Rating: UL94 V-0
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

The primary difference between the main part and its substitute lies in packaging format (Tape & Reel versus Cut Tape) and the presence of a board guide feature in the substitute variant. These differences do not affect electrical or core mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the TSM-108-01-L-SH-TR and TSM-108-01-L-SH-A-TR are active products from Samtec Inc. and maintain full ROHS3 compliance with identical electrical and mechanical specifications. Selection between these parts should be based on the following criteria:

TSM-108-01-L-SH-TR (Tape & Reel): Select this packaging format for high-volume automated assembly operations where tape and reel feeding is standard practice.

TSM-108-01-L-SH-A-TR (Cut Tape with Board Guide): Select this variant when lower volume requirements favor cut tape packaging, or when the integrated board guide feature provides mechanical advantage for your specific board layout and assembly process.

Both parts satisfy identical compliance requirements (UL94 V-0, ROHS3, MSL 1) and operate across the full -55°C to 125°C temperature range. The choice between them is driven by procurement volume, assembly equipment capability, and mechanical design considerations rather than electrical performance.

Frequently Asked Questions (FAQ)

Q: Can TSM-108-01-L-SH-A-TR be used as a direct replacement for TSM-108-01-L-SH-TR?

A: Yes. Both parts are electrically and mechanically equivalent across all critical parameters including pitch, contact configuration, termination method, and operating temperature range. The primary differences are packaging format (Tape & Reel versus Cut Tape) and the board guide feature present in the substitute variant.

Q: What is the significance of the board guide feature in the TSM-108-01-L-SH-A-TR?

A: The board guide is a mechanical feature that aids in component placement and alignment during assembly. It does not affect electrical performance or mating compatibility with corresponding receptacle connectors.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical certifications: ROHS3 compliance, UL94 V-0 flammability rating, and MSL 1 moisture sensitivity level.

Q: Which packaging format should I specify for my design?

A: Tape & Reel (TR) packaging is standard for high-volume automated assembly. Cut Tape (CT) packaging is suitable for lower volumes or manual assembly processes. Consult your assembly partner regarding equipment compatibility.

Q: Do these connectors require any special handling or storage considerations?

A: Both parts carry MSL 1 rating, indicating unlimited shelf life under normal storage conditions. Standard electrostatic discharge (ESD) precautions apply during handling.