TSM-106-01-SM-SV-P Equivalent & Substitute Parts

Part Overview

The TSM-106-01-SM-SV-P is a surface mount rectangular connector header manufactured by Samtec Inc. This 6-position, single-row connector operates at 0.100" (2.54mm) pitch and is designed for board-to-board or cable applications. The part is currently active in production with 686 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when inventory constraints require component flexibility.

Substiute Parts

TSM-106-01-SM-SV-P

Samtec Inc.In Stock: 744TSM-106-01-SM-SV-P Datasheet

Current PartRFQ

TSM-106-01-S-SV-P

Samtec Inc.In Stock: 843TSM-106-01-S-SV-P Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TSM-106-01-SM-SV-P is determined by strict equivalence across the following critical parameters:

• Connector Type: Header, Cuttable
• Contact Type: Male Pin
• Number of Positions: 6
• Number of Rows: 1
• Pitch - Mating: 0.100" (2.54mm)
• Mounting Type: Surface Mount
• Termination: Solder
• Contact Finish - Mating: Gold
• Contact Material: Phosphor Bronze
• Insulation Material: Liquid Crystal Polymer (LCP)
• Operating Temperature: -55°C ~ 125°C
• Product Status: Active
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

The substitute part TSM-106-01-S-SV-P meets all these criteria and is therefore electrically and mechanically equivalent for direct substitution in applications requiring the TSM-106-01-SM-SV-P.

Parameter Comparison

Engineering Selection Recommendations

Both the TSM-106-01-SM-SV-P and TSM-106-01-S-SV-P are active production parts manufactured by Samtec Inc. with full ROHS3 compliance and identical electrical and mechanical specifications. Selection between these parts should be based on inventory availability and supply chain requirements. The TSM-106-01-S-SV-P currently has higher inventory (803 units versus 686 units), making it a viable alternative when primary part availability is constrained. Both parts carry MSL 1 (Unlimited) moisture sensitivity rating and are suitable for immediate use without baking requirements.

Frequently Asked Questions (FAQ)

Q: Can TSM-106-01-S-SV-P be used as a direct replacement for TSM-106-01-SM-SV-P?

A: Yes. Both parts are electrically and mechanically equivalent across all critical parameters including connector type, contact configuration, pitch, mounting method, material composition, and operating temperature range.

Q: What is the difference between these two part numbers?

A: The parts are functionally identical. The difference in part numbering reflects internal Samtec designation but does not affect electrical or mechanical performance in the application.

Q: Are there any compatibility concerns when substituting between these parts?

A: No. Both parts use identical contact materials (Phosphor Bronze), insulation materials (LCP), contact finishes (Gold), and mounting specifications (Surface Mount, Solder termination). PCB footprints and mating interfaces are equivalent.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 compliant, carry UL94 V-0 flammability rating, and share identical ECCN (EAR99) and HTSUS (8536.69.4040) classifications.

Q: What is the moisture sensitivity level for these connectors?

A: Both parts carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. These parts can be stored and handled under standard conditions without special baking or desiccant requirements.

Q: Can these connectors be cut to reduce the number of positions?

A: Yes. Both parts are designated as "Cuttable" headers, allowing position reduction through mechanical separation when required by application design.