TSM-105-02-L-DH Equivalent & Substitute Parts

Part Overview

The TSM-105-02-L-DH is a surface mount rectangular connector header manufactured by Samtec Inc. This connector is a right-angle, 10-position header with 0.100" (2.54mm) pitch spacing, designed for board-to-board or cable applications. The part is currently active in production with 737 units in stock. Substitute parts are identified when electrical and mechanical parameters remain identical, enabling direct replacement in applications where component availability or lead time requires alternative sourcing.

Substiute Parts

TSM-105-02-L-DH

Samtec Inc.In Stock: 785TSM-105-02-L-DH Datasheet

Current PartRFQ

TSM-105-02-L-DH-A

Samtec Inc.In Stock: 948TSM-105-02-L-DH-A Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TSM-105-02-L-DH is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part TSM-105-02-L-DH-A maintains identical specifications in the following key areas:

• Connector type, contact type, and gender (Header, Male Pin)
• Pitch and position configuration (0.100" / 2.54mm, 10 positions, 2 rows)
• Mounting orientation and termination method (Surface Mount Right Angle, Solder)
• Contact geometry and materials (Square shape, Phosphor Bronze, Gold mating finish)
• Insulation material and thermal rating (LCP, -55°C ~ 125°C)
• Compliance certifications (ROHS3, UL94 V-0, MSL 1)

The only documented difference is the addition of a Board Guide feature in the substitute part. This feature does not alter electrical performance or mechanical compatibility with mating connectors, as it functions as a mechanical alignment aid during assembly.

Parameter Comparison

Engineering Selection Recommendations

Both TSM-105-02-L-DH and TSM-105-02-L-DH-A are active production parts with full ROHS3 compliance and UL94 V-0 flammability certification. Selection between these parts should be based on application-specific requirements:

The TSM-105-02-L-DH is suitable for applications where standard header functionality without additional mechanical features is required.

The TSM-105-02-L-DH-A includes a Board Guide feature that provides mechanical alignment assistance during assembly. This feature does not compromise electrical performance or thermal characteristics and is compatible with standard mating connectors designed for the TSM series.

Both parts maintain identical electrical and thermal specifications across the full operating range of -55°C to 125°C. Inventory availability should be considered as a secondary factor, with TSM-105-02-L-DH-A currently showing higher stock levels (851 units versus 737 units).

Frequently Asked Questions (FAQ)

Q: Can TSM-105-02-L-DH-A be used as a direct replacement for TSM-105-02-L-DH?

A: Yes. All critical electrical and mechanical parameters are identical. The Board Guide feature in the TSM-105-02-L-DH-A does not affect mating compatibility or electrical performance.

Q: What is the difference between these two part numbers?

A: The TSM-105-02-L-DH-A includes a Board Guide feature for mechanical alignment during assembly. All other specifications, including pitch, position count, contact materials, and thermal ratings, are identical.

Q: Are both parts suitable for the same PCB layout?

A: Yes. Both parts have identical footprints, pitch spacing (0.100" / 2.54mm), and mounting orientation (Surface Mount, Right Angle). PCB layouts designed for either part are interchangeable.

Q: Do these connectors require different mating components?

A: No. Both parts are compatible with the same mating connectors designed for the TSM series with 0.100" (2.54mm) pitch and 10-position configuration.

Q: What is the operating temperature range for both parts?

A: Both TSM-105-02-L-DH and TSM-105-02-L-DH-A operate across -55°C to 125°C.

Q: Are both parts RoHS compliant?

A: Yes. Both parts are ROHS3 compliant with UL94 V-0 flammability rating and MSL 1 (Unlimited) moisture sensitivity level.