TSM-104-01-T-SV-002 Equivalent & Substitute Parts

Part Overview

The TSM-104-01-T-SV-002 is a surface mount rectangular connector header manufactured by Samtec Inc. This component is a 4-position, single-row header with 0.100" (2.54mm) pitch spacing, designed for board-to-board or cable connections. The part features male pins with solder termination and push-pull fastening. Product status is Active with ROHS3 compliance and UL94 V-0 flammability rating. Substitute parts are identified when packaging or inventory requirements differ while maintaining identical electrical and mechanical specifications.

Substiute Parts

TSM-104-01-T-SV-002

Samtec Inc.In Stock: 814TSM-104-01-T-SV-002 Datasheet

Current PartRFQ

TSM-104-01-T-SV-003

Samtec Inc.In Stock: 735TSM-104-01-T-SV-003 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TSM-104-01-T-SV-002 is determined by strict equivalence across the following critical parameters:

• Number of Positions: 4
• Pitch - Mating: 0.100" (2.54mm)
• Connector Type: Header, Cuttable
• Contact Type: Male Pin
• Mounting Type: Surface Mount
• Termination: Solder
• Fastening Type: Push-Pull
• Operating Temperature: -55°C ~ 105°C
• Material Flammability Rating: UL94 V-0
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

The identified substitute part TSM-104-01-T-SV-003 maintains identical specifications across all critical parameters. The only difference is packaging format: TSM-104-01-T-SV-002 is supplied in Tube packaging, while TSM-104-01-T-SV-003 is supplied in Bulk packaging. Both parts share the same base product number (TSM-104) and are manufactured by Samtec Inc.

Parameter Comparison

Engineering Selection Recommendations

Both TSM-104-01-T-SV-002 and TSM-104-01-T-SV-003 are Active products manufactured by Samtec Inc. and maintain full ROHS3 compliance with UL94 V-0 flammability certification. Selection between these parts is determined by packaging requirements and inventory availability rather than functional or electrical differences.

TSM-104-01-T-SV-002 in Tube packaging is suitable for applications requiring controlled unit quantities and organized component storage. TSM-104-01-T-SV-003 in Bulk packaging is appropriate for high-volume production runs or applications where packaging format does not impose constraints. Both parts carry MSL 1 (Unlimited) moisture sensitivity rating, indicating no special storage or handling requirements.

Frequently Asked Questions (FAQ)

Q: Are TSM-104-01-T-SV-002 and TSM-104-01-T-SV-003 electrically and mechanically identical?

A: Yes. Both parts are functionally equivalent across all electrical and mechanical parameters including connector type, pitch, contact configuration, termination method, and operating temperature range. The only difference is packaging format.

Q: What is the difference between Tube and Bulk packaging for these connectors?

A: Tube packaging (TSM-104-01-T-SV-002) provides individual component protection and organized storage in smaller quantities. Bulk packaging (TSM-104-01-T-SV-003) supplies components in larger quantities without individual protective tubes, typically used for high-volume manufacturing environments.

Q: Can I substitute TSM-104-01-T-SV-003 for TSM-104-01-T-SV-002 in my design?

A: Yes. Both parts share identical specifications for connector type, pitch spacing, contact configuration, solder termination, and operating temperature range. Substitution is valid from a functional and compatibility standpoint.

Q: Are both parts RoHS compliant?

A: Yes. Both TSM-104-01-T-SV-002 and TSM-104-01-T-SV-003 are ROHS3 compliant and carry UL94 V-0 flammability certification.

Q: What is the moisture sensitivity level for these parts?

A: Both parts carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. Standard handling and storage practices are sufficient.