Equivalent & Substitute Parts Reference for TSM-103-01-SS-DV-A-P-TR

Part Overview

The Samtec Inc. TSM-103-01-SS-DV-A-P-TR is a rectangular connector header for surface mount applications, offering 6 positions in 2 rows with a 2.54mm pitch. With active status and substantial inventory, this connector is suited for board-to-board and cable interfaces. Sourcing alternative models is necessary to maintain supply continuity, support high-volume production, and provide compatible options in case of procurement constraints or supply chain fluctuations.

Substiute Parts

TSM-103-01-SS-DV-A-P-TR

Samtec Inc.In Stock: 750TSM-103-01-SS-DV-A-P-TR Datasheet

Current PartRFQ

TSM-103-01-S-DV-A-P-TR

Samtec Inc.In Stock: 1266TSM-103-01-S-DV-A-P-TR Datasheet

SimilarRFQ

TSM-103-01-SM-DV-A-P-TR

Samtec Inc.In Stock: 874TSM-103-01-SM-DV-A-P-TR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute parts are selected strictly based on identical mechanical and electrical attributes provided in the category parameters. The main parameters governing compatibility are: part series, connector type, pitch, number of positions, number of rows, mounting style, termination method, contact material and finish, insulation material, features, and compliance status. Only parts matching these allowed parameters are included as substitutes.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts are in active status and are ROHS3 compliant with Moisture Sensitivity Level (MSL) 1 (Unlimited). They share the same series, mechanical configuration, materials, and finish parameters, supporting interchangeability within the defined scope of rectangular connectors for surface mount applications. Selection among these alternatives can be determined by inventory levels and compliance requirements, all of which match the main part’s certifications.

Frequently Asked Questions (FAQ)

Q1. What parameters must match for substitution in the TSM series rectangular connectors?
A1. Substitution requires matching connector type, number of positions, row configuration, pitch, contact finish/material, mounting style, and compliance certification.

Q2. Are the substitute part numbers TSM-103-01-S-DV-A-P-TR and TSM-103-01-SM-DV-A-P-TR interchangeable with TSM-103-01-SS-DV-A-P-TR?
A2. Yes, based on the provided parameters, these models are interchangeable for applications requiring rectangular connector headers with surface mount, 6 positions, 2.54mm pitch, and specified material and compliance properties.

Q3. Is there any difference in packaging for the substitute parts?
A3. All parts are available in Tape & Reel (TR) packaging.

Q4. What compliance certifications apply to these Samtec TSM-103 series connectors?
A4. All listed connector headers are ROHS3 compliant and classified under ECCN EAR99.

Q5. How should inventory levels influence part selection among equivalents?
A5. Higher inventory levels can support large production runs or rapid procurement, and all listed substitutes have provided inventory status for engineering logistics.