TSM-102-01-SM-SH Equivalent & Substitute Parts

Part Overview

The TSM-102-01-SM-SH is a rectangular connector header manufactured by Samtec Inc., designed for surface mount, right-angle board-to-board or cable applications. This 2-position connector operates across -55°C to 125°C and meets UL94 V-0 flammability requirements. The part is currently active in production with 786 units in stock. Substitute parts are identified to support procurement flexibility, inventory management, and design continuity when the primary part becomes unavailable.

Substiute Parts

TSM-102-01-SM-SH

Samtec Inc.In Stock: 882TSM-102-01-SM-SH Datasheet

Current PartRFQ

TSM-102-01-S-SH

Samtec Inc.In Stock: 817TSM-102-01-S-SH Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TSM-102-01-SM-SH is determined by strict equivalence across the following critical parameters:

• Manufacturer and Series: Samtec Inc. TSM series
• Connector Type and Contact Type: Header with Male Pin contacts
• Position and Row Configuration: 2 positions, 1 row
• Pitch Specification: 0.100" (2.54mm) mating pitch
• Mounting and Termination: Surface mount, right angle, solder termination
• Fastening Mechanism: Push-Pull
• Operating Temperature Range: -55°C ~ 125°C
• Compliance Standards: UL94 V-0, ROHS3 Compliant, MSL 1

The identified substitute part TSM-102-01-S-SH maintains full electrical and mechanical compatibility across all specified parameters, differing only in shrouding designation within the same base product family (TSM-102).

Parameter Comparison

Engineering Selection Recommendations

Both the TSM-102-01-SM-SH and TSM-102-01-S-SH are active production parts from Samtec Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on:

• Availability: The main part (TSM-102-01-SM-SH) has 786 units in stock; the substitute (TSM-102-01-S-SH) has 711 units in stock.
• Compliance Requirements: Both parts meet ROHS3 compliance and UL94 V-0 flammability standards, suitable for applications requiring regulatory adherence.
• Supply Chain Continuity: Either part may be selected to ensure design continuity and procurement flexibility within the TSM-102 base product family.

Frequently Asked Questions (FAQ)

Q: Can TSM-102-01-S-SH be used as a direct replacement for TSM-102-01-SM-SH?

A: Yes. Both parts share identical electrical and mechanical parameters, including pitch, position count, contact materials, operating temperature range, and compliance certifications. They are functionally equivalent for board-to-board and cable connector applications.

Q: What is the difference between these two part numbers?

A: The part numbers differ in their shrouding designation within the TSM-102 base product family. All other specifications, including contact configuration, termination method, and performance characteristics, are identical.

Q: Are there any compatibility concerns when substituting between these parts?

A: No compatibility concerns exist. Both parts use identical mating pitch (0.100" / 2.54mm), contact geometry, and solder termination specifications. PCB footprints and mating connector designs are interchangeable.

Q: Do both parts meet the same regulatory and compliance standards?

A: Yes. Both TSM-102-01-SM-SH and TSM-102-01-S-SH are ROHS3 compliant, UL94 V-0 rated, and carry MSL 1 (Unlimited) moisture sensitivity classification. They meet identical environmental and regulatory requirements.

Q: Which part should I select for new designs?

A: Selection should be based on current inventory availability and supply chain requirements. Both parts are active production items suitable for new designs. Consult with your procurement team regarding lead times and stock levels.