TSF30L60C Equivalent & Substitute Parts

Part Overview

The TSF30L60C is a Schottky diode array manufactured by Taiwan Semiconductor Corporation, configured as a 1 Pair Common Cathode device rated for 60 V DC reverse voltage and 15 A average rectified current per diode. The component is packaged in a TO-220-3 Full Pack with isolated tab for through-hole mounting applications. This part is Active in product status with RoHS3 compliance and REACH Unaffected classification.

Equivalent and substitute parts are identified for applications requiring compatible electrical and mechanical characteristics, including alternative sourcing options and configurations that maintain functional compatibility within specified parameter ranges.

Substiute Parts

TSF30L60C

Taiwan Semiconductor CorporationIn Stock: 790TSF30L60C Datasheet

Current PartRFQ

MBRF1560CT-E3/45

Vishay General Semiconductor - Diodes DivisionIn Stock: 1403MBRF1560CT-E3/45 Datasheet

SimilarRFQ

STF2060CR

SMC Diode SolutionsIn Stock: 1614STF2060CR Datasheet

SimilarRFQ

STF3060C

SMC Diode SolutionsIn Stock: 1781STF3060C Datasheet

SimilarRFQ

VFT3060C-E3/4W

Vishay General Semiconductor - Diodes DivisionIn Stock: 16598VFT3060C-E3/4W Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution compatibility for the TSF30L60C is determined by the following critical parameters:

Primary Compatibility Criteria:

• Diode Configuration: 1 Pair Common Cathode
• Technology: Schottky
• Voltage - DC Reverse (Vr) (Max): 60 V
• Current - Average Rectified (Io) (per Diode): 15 A
• Mounting Type: Through Hole
• Package / Case: TO-220-3 Full Pack, Isolated Tab
• Supplier Device Package: ITO-220AB

Substitute Parts Identified:

Direct Equivalents (Identical Configuration):

• VFT3060C-E3/4W (Vishay General Semiconductor - Diodes Division): Matches all primary criteria with 15 A current rating and Common Cathode configuration
• STF3060C (SMC Diode Solutions): Matches primary criteria with Common Cathode configuration; current rating not specified in available data

Partial Substitutes (Configuration Variation):

• MBRF1560CT-E3/45 (Vishay General Semiconductor - Diodes Division): Common Cathode configuration with 60 V rating; current rating reduced to 7.5 A per diode
• STF2060CR (SMC Diode Solutions): Common Anode configuration with 60 V rating; configuration differs from main part

Parameter Comparison

Engineering Selection Recommendations

Direct Substitution (Equivalent Performance):

VFT3060C-E3/4W is the primary equivalent substitute for TSF30L60C. Both parts maintain identical diode configuration (1 Pair Common Cathode), voltage rating (60 V), and current rating (15 A per diode). Both are ROHS3 Compliant and REACH Unaffected. The VFT3060C-E3/4W operates within the same temperature range (-55 to 150 °C) and uses identical packaging (TO-220-3 Full Pack, Isolated Tab, ITO-220AB). Forward voltage specification differs by 80 mV at rated current (700 mV versus 620 mV), and reverse leakage current is higher (1.2 mA versus 500 µA). This part is suitable for direct replacement in applications where the specified parameter variations are acceptable.

Reduced Current Substitution:

MBRF1560CT-E3/45 is a partial substitute with reduced current rating (7.5 A per diode versus 15 A). This part maintains Common Cathode configuration, 60 V voltage rating, and identical packaging. It is ROHS3 Compliant and REACH Unaffected. Operating temperature range extends to -65 °C minimum. This part is suitable only for applications with current requirements not exceeding 7.5 A per diode.

Configuration Variation Substitutes:

STF3060C (SMC Diode Solutions) maintains Common Cathode configuration and 60 V rating with identical packaging. However, current rating is not specified in available data. REACH Status is Affected. This part requires verification of current capability before selection.

STF2060CR (SMC Diode Solutions) differs in diode configuration (Common Anode versus Common Cathode). This configuration change requires circuit redesign and is not a direct substitute. REACH Status is Affected.

Compliance Considerations:

For applications requiring REACH Unaffected status, VFT3060C-E3/4W and MBRF1560CT-E3/45 are the only suitable alternatives. STF3060C and STF2060CR are REACH Affected and require compliance verification for specific applications.

Frequently Asked Questions (FAQ)

Q: Can MBRF1560CT-E3/45 replace TSF30L60C in all applications?

A: MBRF1560CT-E3/45 is a partial substitute with reduced current rating (7.5 A per diode versus 15 A). It is suitable only for applications where the circuit current requirement does not exceed 7.5 A per diode. Voltage rating (60 V) and diode configuration (Common Cathode) are compatible.

Q: What is the primary difference between VFT3060C-E3/4W and TSF30L60C?

A: VFT3060C-E3/4W is a direct equivalent with matching diode configuration, voltage rating, and current rating. The primary differences are forward voltage specification (700 mV versus 620 mV at 15 A) and reverse leakage current (1.2 mA versus 500 µA at 60 V). Both parts are ROHS3 Compliant and REACH Unaffected.

Q: Why is STF2060CR listed as a substitute if it has a different configuration?

A: STF2060CR is listed as a substitute option due to matching voltage rating (60 V) and identical packaging (TO-220-3 Full Pack, Isolated Tab, ITO-220AB). However, the Common Anode configuration differs from the Common Cathode configuration of TSF30L60C. This configuration change requires circuit redesign and is not a direct replacement.

Q: Are all substitute parts available in the same packaging?

A: All substitute parts identified use TO-220-3 Full Pack with isolated tab (ITO-220AB supplier device package). Through-hole mounting type is consistent across all parts.

Q: What compliance status should I verify for my application?

A: VFT3060C-E3/4W and MBRF1560CT-E3/45 are REACH Unaffected. STF3060C and STF2060CR are REACH Affected. All parts are ROHS3 Compliant. Verify REACH compliance requirements for your specific application and region.

Q: Can I use STF3060C as a direct replacement?

A: STF3060C maintains Common Cathode configuration, 60 V voltage rating, and identical packaging. However, the current rating per diode is not specified in available data. Forward voltage is specified at 700 mV @ 15 A, suggesting 15 A capability. REACH Status is Affected. Verification of current capability and compliance requirements is necessary before selection.

Q: What is the temperature operating range for each substitute?

A: TSF30L60C, VFT3060C-E3/4W, STF3060C, and STF2060CR operate from -55 to 150 °C junction temperature. MBRF1560CT-E3/45 extends the minimum temperature to -65 °C while maintaining the 150 °C maximum.