TSF20H120C-S Equivalent & Substitute Parts Reference

Part Overview

The Taiwan Semiconductor Corporation TSF20H120C-S is classified under Diodes, Rectifiers, and utilizes Schottky technology. It is a 120 V, 10 A diode packaged in a TO-220-3 Full Pack, Isolated Tab (ITO-220AB), intended for through-hole mounting. With an active product status and RoHS3 compliance, the TSF20H120C-S suits fast recovery requirements. When specifying components in this product category, engineers often need to find substitute models due to inventory fluctuations, supply chain requirements, or regulatory compliance needs.

Substiute Parts

TSF20H120C-S

Taiwan Semiconductor CorporationIn Stock: 792TSF20H120C-S Datasheet

Current PartRFQ

STF20120C

SMC Diode SolutionsIn Stock: 2016STF20120C Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for TSF20H120C-S must match key electrical and mechanical parameters: voltage rating (120 V), current rating (10 A), maximum forward voltage at the specified current (Vf @ 10 A), reverse leakage current, recovery speed, Schottky technology, through-hole mounting, and package/case type (TO-220-3 Full Pack, Isolated Tab). Substitution also considers product status and RoHS compliance. Compatibility is determined only by the parameters explicitly listed above.

Parameter Comparison

Engineering Selection Recommendations

The TSF20H120C-S and the STF20120C are both listed as active and RoHS3 compliant, with MSL 1 (Unlimited) ratings. Selection between these parts can consider only product status, RoHS compliance, and MSL status as provided.

Frequently Asked Questions (FAQ)

Q1: What are the required parameters to match when substituting TSF20H120C-S?
A1: Substitutes must match voltage rating (120 V), current rating (10 A or equivalent configuration), Schottky technology, recovery speed, mounting type (through hole), package (TO-220-3 Full Pack, Isolated Tab or ITO-220AB), and RoHS status.

Q2: Can STF20120C be used as a substitute for TSF20H120C-S?
A2: STF20120C matches the specified parameters including voltage, package, mounting type, and RoHS compliance within the data provided.

Q3: Does package compatibility require matching both the TO-220-3 Full Pack and the Supplier Device Package designation?
A3: Yes, both mechanical configuration (TO-220-3 Full Pack, Isolated Tab) and Supplier Device Package (ITO-220AB) are required to match as per the provided data.

Q4: Is temperature rating a consideration when choosing substitutes?
A4: Both TSF20H120C-S and STF20120C share an operating temperature junction range of -55°C to 150°C according to the values provided.

Q5: Is compliance information such as RoHS or MSL status necessary when selecting a substitute?
A5: Yes, RoHS status and Moisture Sensitivity Level (MSL) must be considered based on the provided information.