TSC2200IPWR Equivalent & Substitute Parts

Part Overview

The TSC2200IPWR is a touchscreen controller IC manufactured by Texas Instruments, designed for 4-wire resistive touchscreen applications. This Surface Mount device operates as a data acquisition component with 12-bit resolution and SPI interface capability. The part is currently in active production status with 3295 units available in inventory. Substitute parts are identified when packaging or distribution channel requirements differ while maintaining identical electrical and mechanical specifications.

Substiute Parts

TSC2200IPWR

Texas InstrumentsIn Stock: 3400TSC2200IPWR Datasheet

Current PartRFQ

TSC2200IPW

Texas InstrumentsIn Stock: 1988TSC2200IPW Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The TSC2200IPWR and TSC2200IPW are functionally equivalent touchscreen controller ICs from Texas Instruments. Both parts share the identical base product number TSC2200 and maintain all critical electrical and mechanical parameters:

• Touchscreen interface: 4-wire resistive topology
• Resolution: 12-bit analog-to-digital conversion
• Communication protocol: SPI serial interface
• Voltage reference options: External and internal selectable
• Supply voltage specification: 2.7V to 3.6V operating range
• Supply current: 1.25 mA nominal
• Temperature range: -40°C to 85°C
• Package footprint: 28-TSSOP with 0.173" width (4.40mm)
• Surface mount configuration

The substitution is valid based on packaging format differences only. The TSC2200IPWR is supplied in Tape & Reel format, while the TSC2200IPW is supplied in Tube packaging. Both parts are manufactured to identical specifications and carry the same compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

Both TSC2200IPWR and TSC2200IPW are active production parts from Texas Instruments with full compliance to ROHS3 and REACH regulations. Selection between these parts depends on procurement and assembly requirements:

TSC2200IPWR in Tape & Reel format is suitable for high-volume automated pick-and-place assembly operations where continuous reel feeding is standard practice.

TSC2200IPW in Tube packaging is appropriate for lower-volume production runs, manual assembly processes, or applications where individual component handling is preferred.

Both parts carry identical MSL 1 (Unlimited) moisture sensitivity ratings, eliminating moisture management as a differentiation factor. The electrical performance, thermal characteristics, and interface specifications are identical across both packaging options.

Frequently Asked Questions (FAQ)

Q: Are TSC2200IPWR and TSC2200IPW pin-for-pin compatible?

A: Yes. Both parts use the 28-TSSOP package with identical pinout, footprint dimensions (0.173" width, 4.40mm), and surface mount configuration. PCB layout and schematic connections require no modification when substituting between these parts.

Q: What is the primary difference between these substitute parts?

A: The only difference is the packaging format. TSC2200IPWR ships in Tape & Reel (TR) format for automated assembly lines, while TSC2200IPW ships in Tube format for manual or lower-volume assembly processes. Electrical specifications, performance characteristics, and compliance certifications are identical.

Q: Can I use TSC2200IPW in place of TSC2200IPWR in production?

A: Yes, provided your assembly process can accommodate Tube packaging. The parts are electrically and mechanically equivalent. Verify that your pick-and-place equipment or manual assembly workflow is compatible with Tube-packaged components.

Q: Are there any compliance or certification differences?

A: No. Both parts carry identical ROHS3 compliance, REACH Unaffected status, and MSL 1 (Unlimited) moisture sensitivity ratings. No additional qualification or testing is required when substituting between these parts.

Q: What is the inventory status for these substitute parts?

A: TSC2200IPWR has 3295 units in stock. TSC2200IPW has 1956 units in stock. Both are active production parts available for immediate delivery.

Q: Do these parts require different handling or storage procedures?

A: No. Both parts share MSL 1 (Unlimited) rating, meaning they have unlimited shelf life and require no special moisture control during storage or handling. Standard ESD precautions for Surface Mount ICs apply to both variants.