TS8P05GHC2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS8P05GHC2G is a single-phase bridge rectifier manufactured by Taiwan Semiconductor Corporation, rated for 600 V peak reverse voltage and 8 A average rectified current. This component is designed for through-hole mounting in automotive-grade applications and carries AEC-Q101 qualification. The TS8P05GHC2G is currently discontinued at DiGi Electronics, necessitating identification of equivalent substitute parts that maintain identical electrical and mechanical specifications for continued system support and procurement.

Substiute Parts

TS8P05GHC2G

Taiwan Semiconductor CorporationIn Stock: 755TS8P05GHC2G Datasheet

Current PartRFQ

TS8P05GH

Taiwan Semiconductor CorporationIn Stock: 2269TS8P05GH Datasheet

DirectRFQ

TS8P05G

Taiwan Semiconductor CorporationIn Stock: 5070TS8P05G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS8P05GHC2G are identified based on strict electrical and mechanical parameter equivalence. The substitution criteria are:

Electrical Parameters (Must Match):

• Voltage - Peak Reverse (Max): 600 V
• Current - Average Rectified (Io): 8 A
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 8 A
• Current - Reverse Leakage @ Vr: 10 µA @ 600 V
• Operating Temperature Range: -55°C ~ 150°C (TJ)
• Diode Type: Single Phase
• Technology: Standard

Mechanical Parameters (Must Match):

• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P
• Supplier Device Package: TS-6P

Compliance Parameters (Must Match):

• Grade: Automotive
• Qualification: AEC-Q101
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

All identified substitute parts maintain identical specifications across these parameters. Packaging format (Tube) differs from the main part but does not affect electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

TS8P05GH is the primary direct substitute for TS8P05GHC2G. Both parts share identical electrical specifications, automotive-grade qualification (AEC-Q101), and through-hole TS-6P package configuration. TS8P05GH maintains active product status with higher inventory availability (2179 pcs), ensuring supply chain continuity. This part is supplied in Tube packaging format.

TS8P05G is a parametric equivalent substitute for TS8P05GHC2G. All electrical parameters, mounting type, and package specifications are identical. TS8P05G is active in production with the highest inventory availability (5038 pcs). Automotive grade and AEC-Q101 qualification status are not specified in available data for this variant. This part is supplied in Tube packaging format.

For applications requiring confirmed automotive-grade certification and AEC-Q101 qualification, TS8P05GH is the recommended substitute. For applications where automotive qualification is not a requirement, TS8P05G provides equivalent electrical performance with superior availability.

Frequently Asked Questions (FAQ)

Q: Can TS8P05GH be used as a direct replacement for TS8P05GHC2G?

A: Yes. TS8P05GH is a direct substitute. Both parts have identical electrical ratings (600 V, 8 A), forward voltage characteristics (1.1 V @ 8 A), reverse leakage current (10 µA @ 600 V), operating temperature range (-55°C ~ 150°C), and through-hole TS-6P package configuration. Both carry AEC-Q101 automotive qualification and ROHS3 compliance.

Q: What is the difference between TS8P05GH and TS8P05G?

A: TS8P05GH and TS8P05G are electrically identical bridge rectifiers with matching 600 V / 8 A ratings and TS-6P package specifications. The primary difference is that TS8P05GH explicitly carries automotive-grade designation and AEC-Q101 qualification, while TS8P05G does not specify these certifications in available data. Both are active products supplied in Tube packaging.

Q: Does packaging format affect compatibility?

A: The TS8P05GHC2G is supplied in standard packaging, while substitute parts TS8P05GH and TS8P05G are supplied in Tube packaging. Packaging format does not affect electrical or mechanical compatibility. The through-hole TS-6P package configuration remains identical across all three parts.

Q: Are all substitute parts RoHS compliant?

A: Yes. TS8P05GH and TS8P05G are both ROHS3 compliant, matching the TS8P05GHC2G specification. All three parts are REACH Unaffected.

Q: Which substitute part should be selected for automotive applications?

A: TS8P05GH is the appropriate selection for automotive applications. This part explicitly carries automotive-grade designation and AEC-Q101 qualification, identical to the original TS8P05GHC2G. TS8P05G does not specify automotive qualification in available data.

Q: What is the moisture sensitivity level for substitute parts?

A: Both TS8P05GH and TS8P05G have Moisture Sensitivity Level (MSL) 1 (Unlimited), matching the TS8P05GHC2G specification. This indicates no moisture sensitivity restrictions during storage and handling.