TS8P05G C2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS8P05G C2G is a single-phase bridge rectifier manufactured by Taiwan Semiconductor Corporation, rated for 600 V peak reverse voltage and 8 A average rectified current. This component is packaged in a 4-SIP, TS-6P through-hole configuration and operates across a temperature range of -55°C to 150°C (TJ).

The TS8P05G C2G has been discontinued at DiGi Electronics. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications utilizing this bridge rectifier topology.

Substiute Parts

TS8P05G C2G

Taiwan Semiconductor CorporationIn Stock: 1111TS8P05G C2G Datasheet

Current PartRFQ

TS8P05G

Taiwan Semiconductor CorporationIn Stock: 5070TS8P05G Datasheet

DirectRFQ

TS8P05GH

Taiwan Semiconductor CorporationIn Stock: 2269TS8P05GH Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS8P05G C2G are determined by electrical and mechanical parameter equivalence. The following criteria establish substitution validity:

Electrical Parameters (Critical):

• Voltage - Peak Reverse (Max): 600 V
• Current - Average Rectified (Io): 8 A
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 8 A
• Current - Reverse Leakage @ Vr: 10 µA @ 600 V
• Operating Temperature Range: -55°C ~ 150°C (TJ)

Mechanical Parameters (Critical):

• Diode Type: Single Phase
• Technology: Standard
• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P

Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Substitute parts must match all critical electrical and mechanical parameters. Variations in product status, packaging format (tube vs. other), or additional qualifications (such as automotive grade) do not disqualify substitution when core parameters remain identical.

Parameter Comparison

Engineering Selection Recommendations

TS8P05G (Direct Substitute): This part is the direct functional equivalent to the TS8P05G C2G. All electrical and mechanical parameters are identical. The TS8P05G maintains active product status and is available in higher inventory quantities (5038 Pcs). This part is suitable for direct replacement in applications where the original TS8P05G C2G was specified. The packaging format is tube, which may differ from the original but does not affect electrical performance or mechanical compatibility in through-hole mounting applications.

TS8P05GH (Parametric Equivalent with Automotive Qualification): The TS8P05GH is a parametric equivalent that matches all electrical and mechanical specifications of the TS8P05G C2G. This part carries automotive-grade designation and AEC-Q101 qualification, indicating compliance with automotive industry reliability standards. The TS8P05GH is suitable for applications requiring automotive-grade components or where enhanced reliability documentation is required. This part is also in active production status with adequate inventory availability (2179 Pcs).

Both substitute parts are ROHS3 compliant and maintain the same moisture sensitivity level as the original component. Selection between TS8P05G and TS8P05GH depends on application requirements and whether automotive-grade qualification is necessary.

Frequently Asked Questions (FAQ)

Q: Can TS8P05G replace TS8P05G C2G in existing designs?

A: Yes. The TS8P05G is a direct substitute with identical electrical and mechanical parameters. All critical specifications including voltage rating (600 V), current rating (8 A), forward voltage (1.1 V @ 8 A), and package type (4-SIP, TS-6P) are equivalent. The component is suitable for direct board-level replacement.

Q: What is the difference between TS8P05G and TS8P05GH?

A: Both parts are electrically and mechanically identical. The TS8P05GH carries automotive-grade designation and AEC-Q101 qualification. This qualification indicates the part meets automotive industry reliability and testing standards. Selection depends on whether your application requires automotive-grade components.

Q: Are there packaging differences between the substitute parts?

A: The TS8P05G C2G packaging format is not specified in the available data. Both substitute parts (TS8P05G and TS8P05GH) are supplied in tube packaging. Both maintain the same 4-SIP, TS-6P through-hole package configuration, ensuring mechanical compatibility with existing PCB designs.

Q: Do the substitute parts maintain RoHS compliance?

A: Yes. Both TS8P05G and TS8P05GH are ROHS3 compliant, matching the compliance status of the original TS8P05G C2G. Both parts are also REACH unaffected and carry the same moisture sensitivity level (MSL 1 - Unlimited).

Q: What is the operating temperature range for substitute parts?

A: Both substitute parts operate across the identical temperature range of -55°C to 150°C (TJ), matching the original TS8P05G C2G specification.

Q: Which substitute part should I select for new designs?

A: For standard applications, the TS8P05G is the appropriate choice. For applications requiring automotive-grade components or enhanced reliability documentation, select the TS8P05GH. Both parts are in active production and have adequate inventory availability.