TS-701-HT-5H Thermal Circuit Breaker Equivalent & Substitute Parts

Part Overview

The TS-701-HT-5H is a thermal circuit breaker manufactured by SCHURTER Inc., rated for 5A at 250V AC / 50V DC with push-to-reset panel mount actuation. This single-pole breaker is classified as obsolete, making equivalent substitute parts necessary for ongoing system maintenance and new design implementations. The part carries CSA C22.2 and UL1077 approvals and is ROHS3 compliant.

Key Parameters

Parameter	Value
Manufacturer Part Number	TS-701-HT-5H
Manufacturer	SCHURTER Inc.
Series	TS
Current Rating	5A
Voltage Rating - AC	250V
Voltage Rating - DC	50V
Breaker Type	Thermal
Actuator Type	Push to Reset
Mounting Type	Panel Mount
Number of Poles	1
Product Status	Obsolete
Approval Agencies	CSA C22.2, UL1077
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution for the TS-701-HT-5H is determined by strict equivalence across the following critical parameters:

Current Rating: 5A (exact match required)
Voltage Rating AC: 250V (exact match required)
Voltage Rating DC: 50V (exact match required)
Breaker Type: Thermal (exact match required)
Actuator Type: Push to Reset (exact match required)
Mounting Type: Panel Mount (exact match required)
Number of Poles: 1 (exact match required)

All substitute parts listed below meet these electrical and mechanical specifications. The SCHURTER part 4404.0025 operates at slightly reduced voltage ratings (240V AC / 48V DC) and is classified as a similar alternative rather than a parametric equivalent. All E-T-A and remaining SCHURTER alternatives provide exact parametric equivalence to the original TS-701-HT-5H.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Current Rating	Voltage AC	Voltage DC	Breaker Type	Actuator Type	Mounting Type	Poles	Product Status	Approval Agencies
TS-701-HT-5H	SCHURTER Inc.	5A	250V	50V	Thermal	Push to Reset	Panel Mount	1	Obsolete	CSA C22.2, UL1077
4404.0025	SCHURTER Inc.	5A	240V	48V	Thermal	Push to Reset	Panel Mount	1	Active	CSA C22.2 No 235, EN 60934, GB 17701, IEC 60934, UL1077
1140-E211-P1M1-5A	E-T-A	5A	250V	50V	Thermal	Push to Reset	Panel Mount	1	Active	CSA C22.2 No 235, IEC 60934, UL1077
1140-G111-P1M1-5A	E-T-A	5A	250V	50V	Thermal	Push to Reset	Panel Mount	1	Active	CSA C22.2 No 235, IEC 60934, UL1077
1140-G151-P7M1-5A	E-T-A	5A	250V	50V	Thermal	Push to Reset	Panel Mount	1	Active	CSA C22.2 No 235, IEC 60934, UL1077
127-P10-H-KF-050022-5A	E-T-A	5A	250V	50V	Thermal	Push to Reset	Panel Mount	1	Active	CSA C22.2 No 235, GB 17701, IEC 60934, UL1077
127-P10-H-KF-5A	E-T-A	5A	250V	50V	Thermal	Push to Reset	Panel Mount	1	Active	CSA C22.2 No 235, GB 17701, IEC 60934, UL1077
127-P10-H-KF-D91-5A	E-T-A	5A	250V	50V	Thermal	Push to Reset	Panel Mount	1	Active	CSA C22.2 No 235, GB 17701, IEC 60934, UL1077
1410-G110-P2F1-S01-5A	E-T-A	5A	250V	50V	Thermal	Push to Reset	Panel Mount	1	Active	CSA C22.2 No 235, IEC 60934, UL1077
1410-G111-P2F1-S01-5A	E-T-A	5A	250V	50V	Thermal	Push to Reset	Panel Mount	1	Active	CSA C22.2 No 235, IEC 60934, UL1077
1410-G114-P3F1-S01-5A	E-T-A	5A	250V	50V	Thermal	Push to Reset	Panel Mount	1	Active	CSA C22.2 No 235, IEC 60934, UL1077

Engineering Selection Recommendations

For direct replacement of the obsolete TS-701-HT-5H, the E-T-A parametric equivalents provide the most robust solution. All E-T-A alternatives (1140 series, 127 series, and 1410 series) maintain exact electrical specifications and carry active product status with comprehensive regulatory approvals including CSA C22.2 No 235, IEC 60934, and UL1077 certifications.

The SCHURTER 4404.0025 operates at reduced voltage ratings (240V AC / 48V DC) and is suitable only for applications where the lower voltage envelope is acceptable. This part carries expanded approval coverage including EN 60934 and GB 17701 standards.

All substitute options are ROHS3 compliant and REACH unaffected, maintaining environmental compliance equivalent to the original part. E-T-A parts are available in bulk packaging with significantly higher inventory levels, supporting both immediate replacement needs and long-term supply continuity.

Frequently Asked Questions (FAQ)

Q: Can the SCHURTER 4404.0025 be used as a direct replacement for the TS-701-HT-5H?

A: The 4404.0025 is a similar alternative, not a parametric equivalent. It operates at 240V AC / 48V DC versus the original 250V AC / 50V DC. Use this part only if your application operates within the lower voltage specifications.

Q: What is the difference between the E-T-A 1140, 127, and 1410 series substitutes?

A: All three E-T-A series maintain identical electrical and mechanical specifications (5A, 250V AC, 50V DC, thermal, push-to-reset, panel mount, single-pole). The series designation reflects internal design variations. Selection can be based on packaging availability and inventory levels.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts carry ROHS3 compliance status, matching the environmental compliance of the original TS-701-HT-5H.

Q: What regulatory approvals do the E-T-A substitutes carry?

A: E-T-A parts carry CSA C22.2 No 235, IEC 60934, and UL1077 approvals. The 127 series additionally includes GB 17701 certification. All approvals meet or exceed the original part's CSA C22.2 and UL1077 requirements.

Q: Does packaging type affect electrical performance?

A: No. Packaging (bulk or box) is a logistics consideration only and does not affect electrical or mechanical performance. Select based on your procurement and inventory management requirements.

Q: Why is the original TS-701-HT-5H classified as obsolete?

A: Obsolete status indicates the manufacturer has discontinued production. Active substitute parts from E-T-A provide equivalent functionality with ongoing manufacturer support and supply availability.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message