TS6P07G D2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS6P07G D2G is a single-phase bridge rectifier manufactured by Taiwan Semiconductor Corporation, rated for 1 kV peak reverse voltage and 6 A average rectified current. This component is designed for through-hole mounting applications requiring standard bridge rectification in industrial and commercial electronics. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified to provide alternative sourcing options when the primary part number becomes unavailable or when inventory requirements necessitate alternative stock sources.

Substiute Parts

TS6P07G D2G

Taiwan Semiconductor CorporationIn Stock: 814TS6P07G D2G Datasheet

Current PartRFQ

TS6P07GH

Taiwan Semiconductor CorporationIn Stock: 1980TS6P07GH Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS6P07G D2G are identified based on electrical and mechanical parameter equivalence. The substitution criteria are strictly limited to the following parameters:

• Diode Type: Single Phase
• Technology: Standard
• Voltage - Peak Reverse (Max): 1 kV
• Current - Average Rectified (Io): 6 A
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 6 A
• Current - Reverse Leakage @ Vr: 10 µA @ 1000 V
• Operating Temperature Range: -55°C to 150°C (TJ)
• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Parts meeting all these criteria are classified as parametric equivalents and direct substitutes. The TS6P07GH meets all specified electrical and mechanical parameters and is therefore a valid substitute for the TS6P07G D2G.

Parameter Comparison

Engineering Selection Recommendations

The TS6P07GH is a direct parametric equivalent to the TS6P07G D2G. Both parts are manufactured by Taiwan Semiconductor Corporation and share identical electrical specifications, thermal operating range, and package configuration. Both parts maintain Active product status and full RoHS3 compliance.

The TS6P07GH carries AEC-Q101 automotive qualification, which indicates additional quality and reliability screening beyond standard industrial requirements. This qualification does not restrict use in non-automotive applications and represents an enhanced quality level suitable for demanding environments.

Selection between these parts should be based on inventory availability, lead time requirements, and application-specific quality certifications. Both parts are suitable for direct substitution in through-hole bridge rectifier applications requiring 1 kV, 6 A single-phase rectification.

Frequently Asked Questions (FAQ)

Q: Can the TS6P07GH replace the TS6P07G D2G in existing designs?

A: Yes. The TS6P07GH is a parametric equivalent with identical electrical ratings, thermal range, and package configuration. Direct substitution is supported without circuit modification.

Q: What is the significance of the AEC-Q101 qualification on the TS6P07GH?

A: AEC-Q101 is an automotive industry qualification standard indicating the part has undergone enhanced reliability testing and quality screening. This qualification does not restrict the part to automotive applications and indicates a higher quality level suitable for critical applications.

Q: Are the TS-6P packages identical between both parts?

A: Yes. Both the TS6P07G D2G and TS6P07GH use the 4-SIP, TS-6P package configuration. Pin-to-pin compatibility and board layout requirements are identical.

Q: Do both parts have the same moisture sensitivity rating?

A: Yes. Both parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions during storage or handling.

Q: Are there any compliance differences between the two parts?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and classified under ECCN EAR99 and HTSUS 8541.10.0080. Regulatory compliance is identical.

Q: What is the difference in available inventory between these parts?

A: The TS6P07G D2G has 729 pieces in stock, while the TS6P07GH has 1870 pieces in stock. Inventory levels may vary based on current supply conditions.

Q: Can these parts be used interchangeably in PCB assembly?

A: Yes. Identical package configuration, pin assignment, and electrical characteristics support direct interchangeability in PCB assembly processes without design or layout modifications.