TS6P07G C2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS6P07G C2G is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 1 kV peak reverse voltage and 6 A average rectified current. This component is designed for through-hole mounting in 4-SIP TS-6P package configuration. The part is currently discontinued at DiGi Electronics, necessitating identification of equivalent and substitute components that maintain identical electrical and mechanical specifications for seamless circuit integration.

Substiute Parts

TS6P07G C2G

Taiwan Semiconductor CorporationIn Stock: 835TS6P07G C2G Datasheet

Current PartRFQ

TS6P07G

Taiwan Semiconductor CorporationIn Stock: 999TS6P07G Datasheet

DirectRFQ

TS6P07G D2G

Taiwan Semiconductor CorporationIn Stock: 814TS6P07G D2G Datasheet

Parametric EquivalentRFQ

TS6P07GH

Taiwan Semiconductor CorporationIn Stock: 1980TS6P07GH Datasheet

Parametric EquivalentRFQ

TS6P07GHC2G

Taiwan Semiconductor CorporationIn Stock: 1142TS6P07GHC2G Datasheet

Parametric EquivalentRFQ

TS6P07GHD2G

Taiwan Semiconductor CorporationIn Stock: 752TS6P07GHD2G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TS6P07G C2G is determined by strict equivalence across the following critical parameters:

• Voltage Rating: Peak reverse voltage of 1 kV
• Current Rating: Average rectified current of 6 A
• Forward Voltage Drop: Maximum 1.1 V at 6 A
• Reverse Leakage: 10 µA at 1000 V
• Temperature Range: -55°C to 150°C junction temperature
• Package Configuration: 4-SIP TS-6P through-hole mounting
• Compliance: ROHS3 compliance and MSL 1 rating

All substitute parts listed maintain identical electrical performance specifications and mechanical compatibility. Variations in product status (active versus discontinued), packaging format (tube versus alternative), and automotive qualification (AEC-Q101) do not affect functional interchangeability within the specified parameter envelope.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute (Direct Replacement): TS6P07G

The TS6P07G is the base model variant with active product status. This part maintains complete electrical and mechanical equivalence to the discontinued TS6P07G C2G, with identical ratings across all critical parameters. Selection of this part eliminates discontinuation risk while preserving circuit performance.

Secondary Substitutes (Parametric Equivalents): TS6P07G D2G

The TS6P07G D2G provides parametric equivalence with active availability. The D2G suffix indicates a packaging or supplier variant that does not affect electrical performance or mechanical compatibility.

Automotive-Grade Alternatives: TS6P07GH, TS6P07GHC2G, TS6P07GHD2G

These variants incorporate automotive-grade qualification (AEC-Q101) and are designated for automotive applications. All three maintain identical electrical specifications and through-hole TS-6P package compatibility. Selection of automotive-grade variants is appropriate for applications requiring AEC-Q101 compliance or enhanced reliability screening. These parts are available in active status with higher inventory levels than standard-grade alternatives.

All substitute parts maintain ROHS3 compliance, MSL 1 rating, and identical operating temperature ranges. Selection among available substitutes should be based on application requirements, automotive qualification necessity, and supplier availability.

Frequently Asked Questions (FAQ)

Q: Can TS6P07G replace TS6P07G C2G in existing designs?

A: Yes. The TS6P07G is a direct substitute with identical electrical specifications (1 kV peak reverse voltage, 6 A average rectified current, 1.1 V forward voltage drop at 6 A, 10 µA reverse leakage at 1000 V) and mechanical compatibility (4-SIP TS-6P through-hole package). The C2G suffix on the original part indicates a specific supplier or packaging variant that does not affect functional performance.

Q: What is the difference between standard-grade and automotive-grade variants?

A: Standard-grade parts (TS6P07G, TS6P07G D2G) and automotive-grade parts (TS6P07GH, TS6P07GHC2G, TS6P07GHD2G) maintain identical electrical and mechanical specifications. Automotive-grade variants carry AEC-Q101 qualification, indicating compliance with automotive industry reliability and testing standards. Selection depends on application requirements and whether automotive qualification is mandated.

Q: Are all substitute parts compatible with the same PCB footprint?

A: Yes. All substitute parts use the 4-SIP TS-6P through-hole package configuration with identical pin spacing and mounting requirements. Direct PCB substitution is possible without layout modifications.

Q: What does the D2G suffix indicate?

A: The D2G suffix represents a supplier or packaging variant designation. It does not alter electrical performance, voltage ratings, current ratings, or temperature specifications. Parts with and without the D2G suffix are functionally equivalent.

Q: Which substitute part has the highest inventory availability?

A: TS6P07GH maintains the highest inventory level at 1870 pieces. This automotive-grade variant is actively produced and widely stocked.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance and MSL 1 (unlimited moisture sensitivity) rating, consistent with the original TS6P07G C2G specification.

Q: Can automotive-grade parts be used in non-automotive applications?

A: Yes. Automotive-grade parts (TS6P07GH, TS6P07GHC2G, TS6P07GHD2G) meet or exceed standard-grade specifications and are suitable for any application requiring the specified electrical and thermal performance. AEC-Q101 qualification represents additional screening and reliability assurance.