TS6P06G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS6P06G is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 6A average rectified current at 800V peak reverse voltage. This component is designed for through-hole mounting applications requiring standard bridge rectification in industrial and commercial power supply circuits. The part is currently active in production with 2000 units in stock. Alternative equivalent parts may be required due to supply chain considerations, inventory availability, or specific application requirements such as automotive-grade qualification.

Substiute Parts

TS6P06G

Taiwan Semiconductor CorporationIn Stock: 2098TS6P06G Datasheet

Current PartRFQ

TS6P06GH

Taiwan Semiconductor CorporationIn Stock: 2167TS6P06GH Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TS6P06G is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part must match the following criteria:

• Voltage Rating: Peak reverse voltage of 800V (maximum)
• Current Rating: Average rectified current of 6A
• Forward Voltage Drop: 1.1V maximum at 6A forward current
• Reverse Leakage: 10µA maximum at 800V reverse voltage
• Temperature Range: Operating range of -55°C to 150°C (junction temperature)
• Diode Configuration: Single-phase bridge rectifier
• Technology Class: Standard rectification technology
• Mounting: Through-hole configuration
• Package: 4-SIP TS-6P form factor

Parts meeting all these parameters are classified as parametric equivalents and direct substitutes for the TS6P06G.

Parameter Comparison

Engineering Selection Recommendations

TS6P06G (Standard Grade)

The TS6P06G is suitable for general industrial and commercial applications where standard-grade bridge rectification is required. The part is ROHS3 compliant, REACH unaffected, and carries unlimited moisture sensitivity rating (MSL 1). Current inventory of 2000 units supports immediate procurement for production requirements.

TS6P06GH (Automotive Grade)

The TS6P06GH is the automotive-qualified equivalent, carrying AEC-Q101 certification and automotive-grade designation. This part maintains identical electrical and thermal specifications to the TS6P06G while meeting automotive industry qualification standards. The TS6P06GH is suitable for applications requiring automotive-grade components or where AEC-Q101 compliance is mandated. Current inventory of 2087 units is available.

Both parts are manufactured by Taiwan Semiconductor Corporation and share the same base product number (TS6P). Selection between TS6P06G and TS6P06GH depends solely on application requirements regarding automotive qualification and AEC-Q101 compliance. All other electrical, thermal, and mechanical parameters are identical.

Frequently Asked Questions (FAQ)

Q: Can TS6P06GH replace TS6P06G in any application?

A: TS6P06GH is a direct parametric equivalent with identical electrical ratings (800V, 6A, 1.1V forward drop, 10µA reverse leakage) and operating temperature range (-55°C to 150°C). The primary difference is automotive-grade qualification and AEC-Q101 certification. TS6P06GH can replace TS6P06G in any application where the electrical and thermal specifications are met. Applications not requiring automotive qualification can use either part interchangeably.

Q: What is the significance of AEC-Q101 qualification on the TS6P06GH?

A: AEC-Q101 is an automotive industry qualification standard for discrete semiconductors. The TS6P06GH carries this certification, indicating compliance with automotive reliability and quality requirements. This qualification is required for automotive applications but is not necessary for general industrial or commercial use.

Q: Are the TS-6P packages identical between TS6P06G and TS6P06GH?

A: Yes. Both parts use the 4-SIP TS-6P through-hole package. The physical form factor, pin configuration, and mounting requirements are identical. Both parts are suitable for the same PCB layouts and through-hole assembly processes.

Q: What are the compliance certifications for both parts?

A: Both TS6P06G and TS6P06GH are ROHS3 compliant and REACH unaffected. Both carry MSL 1 (unlimited moisture sensitivity). The TS6P06GH additionally carries AEC-Q101 automotive qualification.

Q: Is there a difference in forward voltage drop between the two parts?

A: No. Both TS6P06G and TS6P06GH specify a maximum forward voltage drop of 1.1V at 6A forward current. Thermal and electrical performance characteristics are identical.

Q: Can these parts be used in high-temperature applications?

A: Both parts are rated for operating junction temperatures from -55°C to 150°C. Applications requiring operation within this temperature range can use either part. Applications exceeding 150°C junction temperature require alternative components with higher temperature ratings.

Q: What is the reverse leakage specification for these bridge rectifiers?

A: Both TS6P06G and TS6P06GH specify a maximum reverse leakage current of 10µA at 800V reverse voltage. This specification is identical for both parts.