TS6P05G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS6P05G is a single-phase bridge rectifier manufactured by Taiwan Semiconductor Corporation, designed for applications requiring 600 V peak reverse voltage and 6 A average rectified current. This component operates across a wide temperature range of -55°C to 150°C and is housed in a 4-SIP through-hole package format. The part maintains Active product status and carries full RoHS3 compliance certification. Bridge rectifiers of this specification are essential in AC-to-DC conversion circuits, power supply designs, and industrial control applications where reliable rectification at moderate voltage and current levels is required.

Substiute Parts

TS6P05G

Taiwan Semiconductor CorporationIn Stock: 2226TS6P05G Datasheet

Current PartRFQ

TS6P05G

Taiwan Semiconductor CorporationIn Stock: 2226TS6P05G Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TS6P05G bridge rectifier is determined by strict equivalence across the following critical parameters:

Electrical Performance Criteria:

• Peak reverse voltage rating must equal or exceed 600 V
• Average rectified current capacity must equal or exceed 6 A
• Forward voltage drop at rated current must not exceed 1.1 V @ 15 A
• Reverse leakage current at rated voltage must not exceed 10 µA @ 600 V

Mechanical and Environmental Criteria:

• Mounting type must be Through Hole
• Package format must be 4-SIP or TS-6P compatible
• Operating temperature range must encompass -55°C to 150°C
• Diode configuration must be Single Phase bridge rectifier
• Technology classification must be Standard

Compliance and Regulatory Criteria:

• RoHS3 compliance status must be maintained
• Moisture Sensitivity Level (MSL) must be 1 or equivalent
• REACH status must be unaffected or compliant

Only components meeting all specified parameters across electrical, mechanical, and compliance categories qualify as direct substitutes for the TS6P05G.

Parameter Comparison

Engineering Selection Recommendations

The TS6P05G maintains Active product status with full availability of 2194 pieces in new original stock condition. This component carries ROHS3 compliance certification and REACH unaffected status, meeting current regulatory requirements for electronic component procurement in industrial and commercial applications.

Selection of the TS6P05G or its direct equivalent is appropriate for applications requiring:

• Single-phase AC-to-DC rectification at 600 V peak reverse voltage
• Continuous average rectified current of 6 A
• Through-hole mounting in PCB designs
• Wide operating temperature range from -55°C to 150°C
• Standard bridge rectifier technology without specialized performance requirements

The component's MSL rating of 1 (Unlimited) indicates minimal moisture sensitivity, reducing handling and storage constraints during manufacturing and assembly processes. The forward voltage specification of 1.1 V @ 15 A establishes the thermal and efficiency characteristics for power dissipation calculations in circuit design.

Frequently Asked Questions (FAQ)

Q: What defines a direct substitute for the TS6P05G bridge rectifier?

A: A direct substitute must match all electrical parameters (600 V peak reverse voltage, 6 A average rectified current, 1.1 V forward voltage @ 15 A, 10 µA reverse leakage @ 600 V), maintain identical through-hole mounting in 4-SIP TS-6P package format, operate across -55°C to 150°C temperature range, and retain RoHS3 compliance and REACH unaffected status.

Q: Can bridge rectifiers with higher voltage or current ratings substitute for the TS6P05G?

A: Components with higher electrical ratings are not considered direct substitutes. Substitution requires exact equivalence across all specified parameters. Higher-rated components may introduce unnecessary cost and thermal characteristics unsuitable for the original application design.

Q: What is the significance of the 4-SIP TS-6P package format?

A: The 4-SIP (Single In-line Package) TS-6P format specifies the physical footprint, pin configuration, and through-hole mounting requirements. Substitutes must use identical package geometry to ensure PCB compatibility without redesign or rework.

Q: How does the MSL rating of 1 affect component handling?

A: MSL 1 (Unlimited) indicates the component has no moisture sensitivity limitations. This classification eliminates the need for specialized dry-pack storage, desiccant handling, or bake-out procedures prior to assembly, simplifying procurement and manufacturing logistics.

Q: Are there any temperature derating considerations for the TS6P05G?

A: The operating temperature range of -55°C to 150°C (TJ) represents the maximum junction temperature specification. Circuit designers must account for thermal dissipation at rated current (6 A) to ensure junction temperature remains within this range during continuous operation.

Q: What compliance certifications are maintained by the TS6P05G?

A: The component carries ROHS3 compliance certification, confirming restriction of hazardous substances in accordance with current EU directives. REACH unaffected status indicates the component is not subject to REACH authorization requirements, simplifying regulatory documentation for end-use applications.