TS6P04G C2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS6P04G C2G is a single-phase bridge rectifier manufactured by Taiwan Semiconductor Corporation, rated for 400 V peak reverse voltage and 6 A average rectified current. This component is designed for through-hole mounting applications requiring standard bridge rectification in industrial and commercial equipment. The part maintains Active product status and is RoHS3 compliant with unlimited moisture sensitivity level (MSL 1).

Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained across all critical operating parameters. Alternative models may be required due to inventory availability, packaging preferences, or specific application certifications.

Substiute Parts

TS6P04G C2G

Taiwan Semiconductor CorporationIn Stock: 998TS6P04G C2G Datasheet

Current PartRFQ

TS6P04GH

Taiwan Semiconductor CorporationIn Stock: 2152TS6P04GH Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the TS6P04G C2G is determined by strict equivalence across the following critical parameters:

• Voltage Rating: Peak reverse voltage must equal 400 V
• Current Rating: Average rectified current must equal 6 A
• Forward Voltage Drop: Maximum forward voltage must equal 1.1 V at 6 A
• Reverse Leakage: Maximum reverse leakage must equal 10 µA at 400 V
• Temperature Range: Operating temperature range must span -55°C to 150°C (TJ)
• Mounting Configuration: Through-hole mounting type required
• Package Type: 4-SIP, TS-6P package required
• Compliance: RoHS3 compliance and MSL 1 rating required

Substitute parts must maintain identical electrical performance and mechanical form factor. Packaging format (tube versus standard) does not affect electrical substitution eligibility when all parametric specifications are matched.

Parameter Comparison

Engineering Selection Recommendations

TS6P04GH is a direct parametric equivalent to TS6P04G C2G. Both parts are manufactured by Taiwan Semiconductor Corporation and maintain identical electrical specifications across all critical parameters: 400 V peak reverse voltage, 6 A average rectified current, 1.1 V forward voltage drop, and 10 µA reverse leakage current.

Both parts are Active products with RoHS3 compliance and REACH unaffected status. The TS6P04GH carries AEC-Q101 automotive qualification, indicating additional quality assurance for automotive-grade applications. This qualification does not restrict use in non-automotive applications and represents an enhanced reliability standard.

Packaging format differs between the two parts (standard versus tube), but this distinction affects only logistics and handling procedures, not electrical or mechanical compatibility. Both parts use identical 4-SIP, TS-6P through-hole packages suitable for direct board-level substitution.

Selection between TS6P04G C2G and TS6P04GH should be based on inventory availability, packaging requirements, and application-specific quality certifications. Both parts are suitable for identical circuit applications without design modification.

Frequently Asked Questions (FAQ)

Q: Can TS6P04GH replace TS6P04G C2G in existing designs?

A: Yes. Both parts maintain identical electrical parameters across voltage rating, current rating, forward voltage drop, reverse leakage, and operating temperature range. The 4-SIP, TS-6P through-hole package is identical, enabling direct board-level substitution without design changes.

Q: What is the significance of AEC-Q101 qualification on TS6P04GH?

A: AEC-Q101 is an automotive-grade qualification standard indicating enhanced reliability testing and quality assurance. This qualification does not restrict the part to automotive applications; it indicates the part meets higher reliability standards applicable across all application categories.

Q: Does packaging format (tube versus standard) affect electrical performance?

A: No. Packaging format affects only component handling, storage, and logistics. Electrical and mechanical specifications remain identical regardless of packaging format. Both TS6P04G C2G and TS6P04GH deliver equivalent circuit performance.

Q: Are both parts RoHS3 compliant?

A: Yes. Both TS6P04G C2G and TS6P04GH are RoHS3 compliant with REACH unaffected status, meeting current environmental and regulatory requirements for electronic component manufacturing.

Q: What parameters must match for bridge rectifier substitution?

A: Critical parameters include peak reverse voltage (400 V), average rectified current (6 A), forward voltage drop (1.1 V @ 6 A), reverse leakage current (10 µA @ 400 V), operating temperature range (-55°C to 150°C), mounting type (through-hole), and package configuration (4-SIP, TS-6P). All parameters must match exactly for direct substitution.

Q: Can these parts be used in applications requiring higher current ratings?

A: No. Both parts are rated for 6 A average rectified current maximum. Applications requiring higher current ratings require bridge rectifiers with higher current specifications.

Q: What is the moisture sensitivity level (MSL) rating?

A: Both parts carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. These components do not require special moisture control during storage, handling, or assembly.