TS6K80 Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS6K80 is a single-phase bridge rectifier manufactured by Taiwan Semiconductor Corporation, rated for 800 V peak reverse voltage and 6 A average rectified current. This component operates across a temperature range of -55°C to 150°C and is packaged in a 4-SIP, GBL through-hole configuration. The part maintains Active product status with ROHS3 compliance and unlimited moisture sensitivity rating. Equivalent and substitute parts are identified based on matching electrical performance parameters, mechanical compatibility, and regulatory compliance to support component procurement flexibility and supply chain continuity.

Substiute Parts

TS6K80

Taiwan Semiconductor CorporationIn Stock: 1197TS6K80 Datasheet

Current PartRFQ

TS6K80

Taiwan Semiconductor CorporationIn Stock: 1197TS6K80 Datasheet

DirectRFQ

KBJ610_T0_00601

Panjit International Inc.In Stock: 10940KBJ610_T0_00601 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS6K80 are identified based on the following critical parameters that determine functional equivalence:

Electrical Compatibility Criteria:

• Diode Type: Single Phase (required match)
• Technology: Standard (required match)
• Current - Average Rectified (Io): 6 A (required match)
• Voltage - Peak Reverse (Max): Equal to or greater than 800 V
• Operating Temperature Range: Must encompass -55°C to 150°C
• Voltage - Forward (Vf): Within acceptable operating margins

Mechanical Compatibility Criteria:

• Mounting Type: Through Hole (required match)
• Package / Case: Compatible 4-SIP configurations

Regulatory Compliance Criteria:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: MSL 1 (Unlimited)

Parts meeting these criteria are classified as direct substitutes capable of performing the same rectification function within the specified electrical and thermal operating envelope.

Parameter Comparison

Engineering Selection Recommendations

TS6K80 (Primary Selection)

The TS6K80 remains the primary component choice when original part specifications are required. This part maintains Active product status with confirmed inventory availability of 1140 pieces. ROHS3 compliance and unlimited moisture sensitivity rating support standard manufacturing and storage protocols. The part is REACH Unaffected, simplifying regulatory documentation requirements.

KBJ610_T0_00601 (Substitute Selection)

The KBJ610_T0_00601 manufactured by Panjit International Inc. functions as an electrical substitute with the following characteristics:

• Maintains identical single-phase bridge rectifier topology and 6 A current rating
• Provides higher voltage rating (1000 V vs. 800 V), ensuring operation within all TS6K80 application envelopes
• Matches operating temperature range (-55°C to 150°C) and through-hole mounting configuration
• Achieves ROHS3 compliance with unlimited moisture sensitivity rating
• Offers higher inventory availability (10895 pieces) supporting supply chain continuity
• REACH Status is Affected, requiring verification against specific application regulatory requirements

Both parts share identical ECCN (EAR99) and HTSUS (8541.10.0080) classifications, supporting consistent export and tariff documentation.

Frequently Asked Questions (FAQ)

Q: Can the KBJ610_T0_00601 directly replace the TS6K80 in all applications?

A: The KBJ610_T0_00601 is electrically compatible as a substitute. Both parts share identical current ratings (6 A), operating temperature ranges (-55°C to 150°C), and through-hole mounting configurations. The substitute part carries a higher voltage rating (1000 V vs. 800 V), which does not restrict operation in 800 V applications. Physical package compatibility (4-SIP configurations) supports direct board-level substitution. Verification of REACH compliance requirements is necessary for specific end-use applications.

Q: What are the key electrical parameters that determine substitution eligibility?

A: Substitution eligibility is determined by: (1) Single Phase diode type, (2) Standard technology classification, (3) 6 A average rectified current rating, (4) Peak reverse voltage equal to or exceeding 800 V, (5) Operating temperature range encompassing -55°C to 150°C, and (6) Forward voltage characteristics within acceptable operating margins. All substitute parts must meet these criteria to ensure functional equivalence.

Q: Are there package compatibility considerations between TS6K80 and KBJ610_T0_00601?

A: Both parts utilize 4-SIP through-hole package configurations. The TS6K80 employs a GBL package variant, while the KBJ610_T0_00601 uses a KBJ-2 package variant. Both configurations maintain standard 4-SIP pin spacing and through-hole lead geometry, supporting direct board-level substitution without layout modifications.

Q: What compliance differences exist between the main part and substitute?

A: Both parts achieve ROHS3 compliance and maintain MSL 1 (Unlimited) moisture sensitivity ratings. The primary compliance difference is REACH status: TS6K80 is REACH Unaffected, while KBJ610_T0_00601 is REACH Affected. Applications subject to REACH regulations require verification of the substitute part's compliance documentation. Both parts share identical ECCN (EAR99) and HTSUS (8541.10.0080) classifications.

Q: How do forward voltage characteristics compare between these parts?

A: The TS6K80 specifies 1 V maximum forward voltage at 2 A, while the KBJ610_T0_00601 specifies 1.05 V maximum at 3 A. These specifications are comparable within standard bridge rectifier operating margins. The substitute part's slightly higher forward voltage specification at a higher test current does not restrict operation in TS6K80 applications.

Q: What inventory considerations apply to component selection?

A: The TS6K80 maintains 1140 pieces in current inventory, while the KBJ610_T0_00601 provides significantly higher availability at 10895 pieces. For applications requiring immediate procurement or high-volume production, the substitute part offers supply chain advantages. Both parts maintain Active product status, supporting long-term availability planning.