TS613ID Equivalent & Substitute Parts

Part Overview

The TS613ID is a voltage feedback amplifier manufactured by STMicroelectronics, configured as a dual-circuit operational amplifier in an 8-SOIC surface mount package. This device is classified as obsolete, indicating that direct procurement from the original manufacturer is no longer available. The identification of equivalent and substitute parts is necessary to maintain design continuity and ensure component availability for production, repair, and redesign applications.

Key Parameters

Parameter	TS613ID Value
Manufacturer	STMicroelectronics
Category	Linear, Amplifiers
Amplifier Type	Voltage Feedback
Number of Circuits	2
Package / Case	8-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount
Slew Rate	40 V/µs
Gain Bandwidth Product	130 MHz
Current - Input Bias	5 µA
Voltage - Input Offset	1 mV
Current - Supply	11 mA
Current - Output / Channel	320 mA
Voltage - Supply Span (Min)	5 V
Voltage - Supply Span (Max)	12 V
Operating Temperature	-40°C ~ 85°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution of the TS613ID requires matching the following critical parameters: dual-circuit configuration (2 circuits), 8-SOIC surface mount package with 0.154" width (3.90mm), voltage feedback amplifier topology, operating temperature range of -40°C to 85°C, and supply voltage compatibility within the 5V to 12V range. The substitute parts identified are grouped based on amplifier type and electrical performance characteristics.

Primary Substitution Criteria:

Amplifier Type: Voltage Feedback
Number of Circuits: 2
Package: 8-SOIC (0.154", 3.90mm Width)
Operating Temperature: -40°C ~ 85°C
Supply Voltage Range: Minimum 5V, Maximum 12V
RoHS3 Compliance
Surface Mount Configuration

The AD8022ARZ represents the closest functional equivalent, maintaining voltage feedback amplifier topology with dual-circuit configuration and identical package specifications. This part is active in production status and meets all compliance requirements.

Parameter Comparison

Parameter	TS613ID	AD8022ARZ
Manufacturer	STMicroelectronics	Analog Devices Inc.
Amplifier Type	Voltage Feedback	Voltage Feedback
Number of Circuits	2	2
Package / Case	8-SOIC (0.154", 3.90mm Width)	8-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount	Surface Mount
Slew Rate	40 V/µs	50 V/µs
Gain Bandwidth Product	130 MHz	100 MHz
Current - Input Bias	5 µA	2.5 µA
Voltage - Input Offset	1 mV	1.5 mV
Current - Supply	11 mA	4 mA
Current - Output / Channel	320 mA	55 mA
Voltage - Supply Span (Min)	5 V	4.5 V
Voltage - Supply Span (Max)	12 V	26 V
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C
RoHS Status	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)
Product Status	Obsolete	Active

Engineering Selection Recommendations

The AD8022ARZ is the primary substitute for the TS613ID based on functional equivalence and active production status. Both devices maintain voltage feedback amplifier topology with dual-circuit configuration in identical 8-SOIC packages. The AD8022ARZ is ROHS3 compliant and carries MSL Level 1 rating, matching the compliance profile of the original part.

The AD8022ARZ demonstrates improved power efficiency with 4 mA supply current compared to the TS613ID's 11 mA, and extends the maximum supply voltage to 26 V, providing greater design flexibility. The slew rate of 50 V/µs exceeds the TS613ID specification of 40 V/µs. The gain bandwidth product of 100 MHz is slightly lower than the TS613ID's 130 MHz, and output current per channel is reduced to 55 mA from 320 mA.

Selection of the AD8022ARZ requires circuit validation to confirm that the reduced output current capability (55 mA versus 320 mA) and lower gain bandwidth product (100 MHz versus 130 MHz) are compatible with the intended application. The extended supply voltage range of the AD8022ARZ (4.5 V to 26 V) provides additional operational flexibility beyond the TS613ID's 5 V to 12 V range.

Frequently Asked Questions (FAQ)

Q: Can the AD8022ARZ directly replace the TS613ID without circuit modification?

A: The AD8022ARZ shares identical package geometry (8-SOIC, 0.154" width), dual-circuit configuration, and voltage feedback amplifier topology. Pin-to-pin compatibility exists for the 8-SOIC package. However, the reduced output current per channel (55 mA versus 320 mA) and lower gain bandwidth product (100 MHz versus 130 MHz) require circuit validation to confirm suitability for the specific application.

Q: What are the key electrical differences between the TS613ID and AD8022ARZ?

A: The AD8022ARZ provides lower supply current consumption (4 mA versus 11 mA), higher slew rate (50 V/µs versus 40 V/µs), and extended maximum supply voltage (26 V versus 12 V). The AD8022ARZ has reduced output current capability per channel (55 mA versus 320 mA) and lower gain bandwidth product (100 MHz versus 130 MHz). Input bias current is lower in the AD8022ARZ (2.5 µA versus 5 µA).

Q: Are there packaging options available for the AD8022ARZ?

A: The AD8022ARZ is available in Tube packaging. The 8-SOIC package dimensions are identical to the TS613ID (0.154" width, 3.90mm). Both devices are surface mount components with identical pin configurations for the 8-SOIC package.

Q: What compliance certifications apply to the AD8022ARZ?

A: The AD8022ARZ is ROHS3 compliant, REACH unaffected, and carries ECCN classification EAR99. Moisture Sensitivity Level is 1 (Unlimited). These certifications match the TS613ID compliance profile.

Q: Is the AD8022ARZ suitable for applications requiring high output current?

A: The AD8022ARZ provides 55 mA output current per channel, compared to the TS613ID's 320 mA. Applications requiring output currents exceeding 55 mA per channel require alternative component selection or external buffering stages.

Q: What is the operating temperature range for the AD8022ARZ?

A: The AD8022ARZ operates across the temperature range of -40°C to 85°C, matching the TS613ID specification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message