TS5V330D Equivalent & Substitute Parts

Part Overview

The TS5V330D is a video switch integrated circuit manufactured by Texas Instruments, designed for quad SPDT (Single Pole Double Throw) switching applications in video signal routing. This 16-SOIC surface mount device provides bi-directional RGB video switching with 4 independent channels. The TS5V330D is currently in Last Time Buy status, indicating end-of-life production. Identifying equivalent substitute parts is necessary to ensure continued component availability for new designs and ongoing production requirements.

Substiute Parts

TS5V330D

Texas InstrumentsIn Stock: 1764TS5V330D Datasheet

Current PartRFQ

TS5V330CDR

Texas InstrumentsIn Stock: 1621TS5V330CDR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TS5V330D is determined by the following critical parameters:

• Switch Architecture: SPDT configuration with 4 independent channels
• Electrical Performance: On-state resistance maximum of 10 Ohm, supply voltage range 4V to 5.5V, and -3dB bandwidth specification
• Package Compatibility: 16-SOIC surface mount package with 0.154" width (3.90mm)
• Environmental Specifications: Operating temperature range -40°C to 85°C
• Compliance Requirements: ROHS3 compliance and MSL Level 1 rating

The TS5V330CDR qualifies as a direct substitute based on matching all critical electrical parameters, identical package specifications, and equivalent compliance certifications. The primary distinction is packaging format (Tape & Reel versus Tube) and product status transition (Last Time Buy to Active).

Parameter Comparison

Engineering Selection Recommendations

The TS5V330CDR is a qualified substitute for the TS5V330D based on electrical and mechanical parameter equivalence. Both devices maintain identical core specifications for switch configuration, channel count, impedance characteristics, supply voltage range, and operating temperature envelope. Package geometry and mounting requirements are identical, ensuring direct PCB compatibility without layout modifications.

The TS5V330CDR offers the advantage of Active product status, providing extended component availability and supply chain continuity compared to the Last Time Buy status of the TS5V330D. Both parts maintain equivalent ROHS3 compliance and MSL Level 1 ratings, satisfying identical regulatory and environmental requirements.

The -3dB bandwidth specification of the TS5V330CDR (250 MHz) remains within acceptable parameters for video switching applications, as it exceeds typical RGB video signal frequency requirements while maintaining the 10 Ohm on-state resistance specification critical for signal integrity.

Frequently Asked Questions (FAQ)

Q: Can the TS5V330CDR directly replace the TS5V330D in existing designs?

A: Yes. Both parts share identical electrical specifications, package dimensions, and pin configurations. No circuit modifications or PCB layout changes are required for substitution.

Q: What is the difference between Tube and Tape & Reel packaging?

A: Tube packaging (TS5V330D) is suitable for lower-volume applications and manual assembly processes. Tape & Reel packaging (TS5V330CDR) is optimized for high-volume automated pick-and-place assembly. Both formats contain the same component with identical electrical performance.

Q: Why does the TS5V330CDR have a lower -3dB bandwidth specification?

A: The TS5V330CDR specifies 250 MHz minimum bandwidth compared to 300 MHz for the TS5V330D. Both specifications exceed the frequency requirements for standard video signal routing applications. The difference reflects manufacturing process variations and does not impact functional compatibility for video switching.

Q: Are there any compliance or certification differences between these parts?

A: No. Both the TS5V330D and TS5V330CDR maintain identical ROHS3 compliance, MSL Level 1 ratings, REACH status, and ECCN classifications.

Q: What should be considered when transitioning from TS5V330D to TS5V330CDR?

A: The primary consideration is packaging format. If your assembly process uses automated equipment, Tape & Reel format (TS5V330CDR) is recommended. Electrical performance and board-level compatibility are identical, requiring no design changes.