TS50P06GHC2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS50P06GHC2G is a single-phase bridge rectifier manufactured by Taiwan Semiconductor Corporation, rated for 800 V peak reverse voltage and 50 A average rectified current. This component is designed for through-hole mounting in automotive-grade applications and carries AEC-Q101 qualification. The part is currently discontinued at DiGi Electronics, necessitating identification of equivalent substitute components that maintain identical electrical and mechanical specifications for continued system support and procurement.

Substiute Parts

TS50P06GHC2G

Taiwan Semiconductor CorporationIn Stock: 1134TS50P06GHC2G Datasheet

Current PartRFQ

TS50P06GH

Taiwan Semiconductor CorporationIn Stock: 2138TS50P06GH Datasheet

DirectRFQ

TS50P06G

Taiwan Semiconductor CorporationIn Stock: 2003TS50P06G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TS50P06GHC2G is determined by strict equivalence across the following critical parameters:

Electrical Specifications:

• Voltage - Peak Reverse (Max): 800 V
• Current - Average Rectified (Io): 50 A
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 25 A
• Current - Reverse Leakage @ Vr: 10 µA @ 800 V
• Operating Temperature Range: -55°C ~ 150°C (TJ)

Mechanical & Compliance Specifications:

• Diode Type: Single Phase
• Technology: Standard
• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P
• Grade: Automotive
• Qualification: AEC-Q101
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

All substitute parts listed maintain identical electrical performance and mechanical compatibility with the original TS50P06GHC2G component. Substitutes differ only in packaging format (tube versus other configurations) and product availability status.

Parameter Comparison

Engineering Selection Recommendations

TS50P06GH is the primary substitute for the discontinued TS50P06GHC2G. This part maintains full electrical and mechanical equivalence, including automotive-grade classification and AEC-Q101 qualification. The TS50P06GH is currently in active production status with confirmed inventory availability.

TS50P06G provides parametric equivalence across all electrical specifications and mechanical mounting requirements. However, automotive grade and AEC-Q101 qualification status are not specified for this variant. Selection of TS50P06G is appropriate for non-automotive applications or where automotive qualification is not a system requirement.

For automotive applications requiring AEC-Q101 compliance, TS50P06GH is the specified substitute. For general industrial or consumer applications, both TS50P06GH and TS50P06G are electrically and mechanically compatible with the original TS50P06GHC2G design.

Frequently Asked Questions (FAQ)

Q: Can TS50P06GH directly replace TS50P06GHC2G in automotive applications?

A: Yes. TS50P06GH maintains identical electrical specifications (800 V, 50 A, 1.1 V forward voltage), mechanical package (4-SIP, TS-6P through-hole), automotive grade classification, and AEC-Q101 qualification. The components are functionally interchangeable.

Q: What is the difference between TS50P06GH and TS50P06G?

A: Both parts share identical electrical parameters and mechanical packaging. TS50P06GH carries specified automotive grade and AEC-Q101 qualification; TS50P06G does not list these qualifications in the provided specifications. For automotive applications, TS50P06GH is the appropriate selection.

Q: Are there packaging differences between the substitute parts?

A: TS50P06GHC2G and TS50P06GH differ in packaging format (the main part does not specify packaging type; TS50P06GH is supplied in tube packaging). Both use identical 4-SIP, TS-6P through-hole package cases. This difference does not affect electrical or mechanical compatibility.

Q: Do the substitute parts meet RoHS and REACH compliance?

A: Yes. Both TS50P06GH and TS50P06G are ROHS3 compliant and REACH unaffected, matching the compliance status of the original TS50P06GHC2G.

Q: What is the operating temperature range for substitute parts?

A: All substitute parts operate across the identical temperature range of -55°C to 150°C (TJ), matching the original component specification.

Q: Can TS50P06G be used in automotive applications?

A: TS50P06G meets all electrical and mechanical specifications required for automotive circuit operation. However, automotive grade and AEC-Q101 qualification are not specified for this variant. For systems requiring documented automotive qualification, TS50P06GH is the specified substitute.