TS50P06G C2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS50P06G C2G is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 800 V peak reverse voltage and 50 A average rectified current. This component is designed for through-hole mounting applications requiring standard rectification technology in industrial and commercial power supply circuits.

The TS50P06G C2G has been discontinued at DiGi Electronics. Equivalent substitute parts are available from the same manufacturer with identical electrical specifications and mechanical compatibility, ensuring direct replacement capability in existing designs.

Key Parameters

Parameter	Value
Diode Type	Single Phase
Technology	Standard
Voltage - Peak Reverse (Max)	800 V
Current - Average Rectified (Io)	50 A
Voltage - Forward (Vf) (Max) @ If	1.1 V @ 25 A
Current - Reverse Leakage @ Vr	10 µA @ 800 V
Operating Temperature Range	-55°C ~ 150°C (TJ)
Mounting Type	Through Hole
Package / Case	4-SIP, TS-6P
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the TS50P06G C2G are determined by equivalence across the following critical parameters:

Voltage Rating: Peak reverse voltage of 800 V
Current Rating: Average rectified current of 50 A
Forward Voltage Characteristics: Maximum forward voltage of 1.1 V at 25 A
Reverse Leakage: Maximum reverse leakage current of 10 µA at 800 V
Diode Configuration: Single-phase bridge rectifier topology
Mounting Technology: Through-hole mounting
Package Form Factor: 4-SIP, TS-6P package designation
Environmental Compliance: ROHS3 compliance and unlimited moisture sensitivity rating

All substitute parts listed maintain identical electrical performance specifications and mechanical compatibility with the original TS50P06G C2G component.

Parameter Comparison

Parameter	TS50P06G C2G (Main)	TS50P06G (Substitute)	TS50P06GH (Substitute)
Manufacturer	Taiwan Semiconductor Corporation	Taiwan Semiconductor Corporation	Taiwan Semiconductor Corporation
Diode Type	Single Phase	Single Phase	Single Phase
Technology	Standard	Standard	Standard
Voltage - Peak Reverse (Max)	800 V	800 V	800 V
Current - Average Rectified (Io)	50 A	50 A	50 A
Voltage - Forward (Vf) (Max) @ If	1.1 V @ 25 A	1.1 V @ 25 A	1.1 V @ 25 A
Current - Reverse Leakage @ Vr	10 µA @ 800 V	10 µA @ 800 V	10 µA @ 800 V
Operating Temperature Range	-55°C ~ 150°C (TJ)	-55°C ~ 150°C (TJ)	-55°C ~ 150°C (TJ)
Mounting Type	Through Hole	Through Hole	Through Hole
Package / Case	4-SIP, TS-6P	4-SIP, TS-6P	4-SIP, TS-6P
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Discontinued at DiGi Electronics	Active	Active
Grade	Standard	Standard	Automotive
Qualification	Not specified	Not specified	AEC-Q101

Engineering Selection Recommendations

TS50P06G: This part is functionally identical to the discontinued TS50P06G C2G and maintains active product status. It is suitable for direct replacement in applications where standard industrial-grade rectification is required. The part is available in tube packaging and provides equivalent electrical performance across all specified parameters.

TS50P06GH: This part is functionally identical to the discontinued TS50P06G C2G with the addition of automotive-grade qualification (AEC-Q101) and automotive classification. Selection of this variant is appropriate for applications requiring automotive-grade components or where AEC-Q101 qualification is mandated by design specifications or customer requirements. The part maintains identical electrical specifications and through-hole TS-6P package compatibility.

Both substitute parts are manufactured by Taiwan Semiconductor Corporation and carry ROHS3 compliance certification, ensuring regulatory alignment with the original component.

Frequently Asked Questions (FAQ)

Q: Can TS50P06G be used as a direct replacement for TS50P06G C2G?

A: Yes. The TS50P06G provides identical electrical specifications including 800 V peak reverse voltage, 50 A average rectified current, 1.1 V forward voltage at 25 A, and 10 µA reverse leakage at 800 V. The component uses the same 4-SIP, TS-6P through-hole package and maintains equivalent operating temperature range and compliance certifications.

Q: What is the difference between TS50P06G and TS50P06GH?

A: Both parts are electrically and mechanically identical. The TS50P06GH carries automotive-grade classification and AEC-Q101 qualification, making it suitable for automotive applications or designs requiring automotive-grade component certification. Standard industrial applications can use either variant.

Q: Are the substitute parts available in the same package as the original TS50P06G C2G?

A: Yes. All substitute parts use the 4-SIP, TS-6P through-hole package designation, ensuring mechanical and electrical compatibility with existing PCB layouts and mounting requirements.

Q: What compliance certifications apply to these substitute parts?

A: All parts listed are ROHS3 compliant and carry unlimited moisture sensitivity level (MSL 1) rating. The TS50P06GH additionally carries AEC-Q101 automotive qualification.

Q: Can these parts be used interchangeably in the same circuit?

A: Yes. The TS50P06G and TS50P06GH are parametrically equivalent across all electrical specifications and package form factors. Selection between them depends on whether automotive-grade qualification is required by the application or design specification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message