TS40P05GHC2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS40P05GHC2G is a single-phase bridge rectifier manufactured by Taiwan Semiconductor Corporation, rated for 600 V peak reverse voltage and 40 A average rectified current. This component is designed for through-hole mounting in automotive-grade applications and carries AEC-Q101 qualification. The part is currently discontinued at DiGi Electronics, necessitating identification of equivalent substitute components that maintain identical electrical and mechanical specifications for continued system support and procurement.

Substiute Parts

TS40P05GHC2G

Taiwan Semiconductor CorporationIn Stock: 1212TS40P05GHC2G Datasheet

Current PartRFQ

TS40P05GH

Taiwan Semiconductor CorporationIn Stock: 1542TS40P05GH Datasheet

DirectRFQ

TS40P05G

Taiwan Semiconductor CorporationIn Stock: 2147TS40P05G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TS40P05GHC2G is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute parts identified—TS40P05GH and TS40P05G—share the following defining characteristics with the main part:

Electrical Parameters (Identical):

• Single-phase bridge rectifier topology
• 600 V peak reverse voltage rating
• 40 A average rectified current capacity
• 1.1 V maximum forward voltage at 20 A
• 10 µA maximum reverse leakage current at 600 V
• -55°C to 150°C operating temperature range

Mechanical & Compliance Parameters (Identical):

• Through-hole mounting configuration
• 4-SIP, TS-6P package format
• Automotive grade classification
• AEC-Q101 qualification
• ROHS3 compliance
• MSL 1 (Unlimited moisture sensitivity level)

All substitute parts are manufactured by Taiwan Semiconductor Corporation and share the common base product number TS40P05. The substitutes differ only in packaging format (tube) and product status (active vs. discontinued), with no deviation in functional or electrical specifications.

Parameter Comparison

Engineering Selection Recommendations

TS40P05GH is the primary direct substitute for TS40P05GHC2G. Both parts carry identical electrical specifications, automotive-grade classification, and AEC-Q101 qualification. The TS40P05GH maintains active product status and is available in tube packaging, providing continuity for applications requiring the TS40P05GHC2G. This part is suitable for direct replacement in all automotive and industrial applications where the original component was specified.

TS40P05G serves as a parametric equivalent substitute. All electrical and mechanical parameters match the main part identically, including voltage ratings, current capacity, temperature range, package format, and RoHS compliance. However, automotive grade and AEC-Q101 qualification status are not specified for this variant. Selection of TS40P05G is appropriate for non-automotive applications or where automotive qualification is not a system requirement. For automotive applications requiring AEC-Q101 certification, TS40P05GH is the recommended choice.

Both substitute parts are manufactured by Taiwan Semiconductor Corporation and share the TS40P05 base product number, ensuring design continuity and supply chain compatibility.

Frequently Asked Questions (FAQ)

Q: Can TS40P05GH be used as a direct replacement for TS40P05GHC2G?

A: Yes. TS40P05GH is a direct substitute. Both parts are identical in electrical specifications (600 V, 40 A, 1.1 V forward voltage, 10 µA reverse leakage), operating temperature range (-55°C to 150°C), package format (4-SIP, TS-6P), automotive grade, and AEC-Q101 qualification. The only difference is packaging format and product status; TS40P05GH is currently active.

Q: What is the difference between TS40P05GH and TS40P05G?

A: Both parts share identical electrical parameters and package specifications. The primary difference is that TS40P05GH carries automotive-grade classification and AEC-Q101 qualification, while TS40P05G does not specify these certifications. For automotive applications, TS40P05GH is the appropriate selection.

Q: Are all three parts compatible with the same PCB layout?

A: Yes. All three parts—TS40P05GHC2G, TS40P05GH, and TS40P05G—use the identical 4-SIP, TS-6P through-hole package format. No PCB layout modifications are required when substituting between these parts.

Q: What does AEC-Q101 qualification mean for this bridge rectifier?

A: AEC-Q101 is an automotive electronics qualification standard. Parts meeting this qualification have undergone rigorous testing for reliability and performance in automotive environments. TS40P05GHC2G and TS40P05GH both carry this qualification, making them suitable for automotive applications.

Q: Is TS40P05G suitable for automotive applications?

A: TS40P05G meets all electrical and mechanical specifications required for automotive use. However, automotive-grade classification and AEC-Q101 qualification are not specified for this variant. If your application requires formal automotive qualification, TS40P05GH is the appropriate selection.

Q: What is the significance of the TS-6P package designation?

A: TS-6P is the supplier device package designation for this bridge rectifier series. It specifies the physical form factor and pin configuration for the 4-SIP (Single In-line Package) format. All three substitute parts use this identical package, ensuring mechanical and electrical compatibility.

Q: Are there any differences in thermal performance between these parts?

A: All three parts share identical operating temperature specifications (-55°C to 150°C junction temperature) and are manufactured using the same standard bridge rectifier technology. No thermal performance differences exist between the substitutes.

Q: What does ROHS3 compliance indicate?

A: ROHS3 compliance indicates the part meets Restriction of Hazardous Substances Directive requirements, restricting the use of specific hazardous materials in electrical and electronic equipment. All three parts are ROHS3 compliant.