TS40P05G C2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS40P05G C2G is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 600 V peak reverse voltage and 40 A average rectified current. This component is designed for through-hole mounting applications requiring standard rectification technology in industrial and commercial power conversion circuits.

The TS40P05G C2G has been discontinued at DiGi Electronics. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications utilizing this bridge rectifier specification.

Substiute Parts

TS40P05G C2G

Taiwan Semiconductor CorporationIn Stock: 744TS40P05G C2G Datasheet

Current PartRFQ

TS40P05G

Taiwan Semiconductor CorporationIn Stock: 2147TS40P05G Datasheet

DirectRFQ

TS40P05GH

Taiwan Semiconductor CorporationIn Stock: 1542TS40P05GH Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS40P05G C2G bridge rectifier are determined by electrical and mechanical parameter equivalence. The following criteria establish substitution validity:

Electrical Parameters (Critical):

• Voltage - Peak Reverse (Max): 600 V
• Current - Average Rectified (Io): 40 A
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 20 A
• Current - Reverse Leakage @ Vr: 10 µA @ 600 V
• Operating Temperature Range: -55°C to 150°C (TJ)

Mechanical Parameters (Critical):

• Diode Type: Single Phase
• Technology: Standard
• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P

Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

All substitute parts listed maintain identical electrical performance characteristics and mechanical compatibility with the original TS40P05G C2G specification. Substitutes are grouped based on product status and additional qualifications where applicable.

Parameter Comparison

Engineering Selection Recommendations

TS40P05G (Direct Substitute): The TS40P05G is the primary substitute for the discontinued TS40P05G C2G. This part maintains identical electrical and mechanical specifications with full parameter equivalence. The TS40P05G carries active product status and is available in tube packaging. This part is suitable for direct replacement in all applications where the original TS40P05G C2G was specified.

TS40P05GH (Parametric Equivalent with Automotive Qualification): The TS40P05GH is a parametric equivalent offering identical electrical performance and mechanical compatibility. This variant includes automotive-grade qualification (AEC-Q101) and is designated for automotive applications. The TS40P05GH maintains active product status and is available in tube packaging. Selection of this part is appropriate for applications requiring automotive-grade components or where AEC-Q101 qualification is a design requirement.

Both substitute parts are ROHS3 compliant and carry unlimited moisture sensitivity classification, ensuring compatibility with standard manufacturing and storage environments.

Frequently Asked Questions (FAQ)

Q: Can the TS40P05G be used as a direct replacement for the TS40P05G C2G?

A: Yes. The TS40P05G is a direct substitute with identical electrical parameters (600 V peak reverse voltage, 40 A average rectified current, 1.1 V forward voltage at 20 A, 10 µA reverse leakage at 600 V) and mechanical specifications (through-hole mounting, 4-SIP TS-6P package). Both parts are ROHS3 compliant with unlimited moisture sensitivity classification.

Q: What is the difference between TS40P05G and TS40P05GH?

A: The TS40P05GH includes automotive-grade qualification (AEC-Q101) and is designated as an automotive-grade component. All electrical parameters and mechanical specifications are identical to the TS40P05G. Selection of the TS40P05GH is required only when automotive qualification is a design or application requirement.

Q: Are the substitute parts available in the same packaging as the original TS40P05G C2G?

A: The original TS40P05G C2G was supplied in C2G packaging. The substitute parts TS40P05G and TS40P05GH are supplied in tube packaging. Both maintain the identical 4-SIP TS-6P package / case specification for through-hole mounting. Tube packaging is standard for these components and does not affect electrical or mechanical compatibility.

Q: What is the operating temperature range for these bridge rectifiers?

A: All parts in this substitution group operate across the temperature range of -55°C to 150°C (TJ). This specification applies to the TS40P05G C2G, TS40P05G, and TS40P05GH.

Q: Are these parts RoHS compliant?

A: Yes. The TS40P05G C2G, TS40P05G, and TS40P05GH are all ROHS3 compliant. All parts carry a moisture sensitivity level (MSL) classification of 1 (Unlimited), indicating no special moisture handling requirements during storage or manufacturing.

Q: Can I use TS40P05GH in non-automotive applications?

A: Yes. The TS40P05GH maintains identical electrical and mechanical specifications to the TS40P05G and can be used in any application where the TS40P05G C2G was originally specified. The automotive qualification is an additional certification that does not restrict use in non-automotive applications.