TS35P05GHC2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS35P05GHC2G is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 600 V peak reverse voltage and 35 A average rectified current. This component is designed for through-hole mounting in automotive-grade applications and carries AEC-Q101 qualification. The TS35P05GHC2G has been discontinued at DiGi Electronics, necessitating identification of equivalent substitute parts that maintain identical electrical and mechanical specifications for continued system integration and maintenance.

Substiute Parts

TS35P05GHC2G

Taiwan Semiconductor CorporationIn Stock: 1022TS35P05GHC2G Datasheet

Current PartRFQ

TS35P05GH

Taiwan Semiconductor CorporationIn Stock: 2257TS35P05GH Datasheet

DirectRFQ

TS35P05G

Taiwan Semiconductor CorporationIn Stock: 1871TS35P05G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS35P05GHC2G are identified based on strict equivalence across all critical electrical and mechanical parameters. The substitution logic is based on the following key parameters:

Electrical Specifications:

• Voltage - Peak Reverse (Max): 600 V
• Current - Average Rectified (Io): 35 A
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 17.5 A
• Current - Reverse Leakage @ Vr: 10 µA @ 600 V
• Operating Temperature Range: -55°C ~ 150°C (TJ)

Mechanical & Compliance Specifications:

• Diode Type: Single Phase
• Technology: Standard
• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P
• Grade: Automotive
• Qualification: AEC-Q101
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Parts meeting all these parameters are classified as direct substitutes. The TS35P05GH and TS35P05G both satisfy these criteria and are manufactured by Taiwan Semiconductor Corporation under the same base product number TS35P05.

Parameter Comparison

Engineering Selection Recommendations

TS35P05GH is the primary substitute for the discontinued TS35P05GHC2G. This part maintains full electrical and mechanical equivalence, including automotive-grade classification and AEC-Q101 qualification. The TS35P05GH is currently in active production status with 2158 units in stock, ensuring supply chain continuity. The packaging format is identical (TS-6P through-hole), and all electrical parameters match the original specification exactly.

TS35P05G is a parametric equivalent that satisfies all electrical specifications and maintains the same through-hole TS-6P package configuration. However, automotive grade and AEC-Q101 qualification status are not specified for this variant. This part is suitable for applications where automotive-grade certification is not a requirement. The TS35P05G is in active production with 1788 units in stock.

For applications requiring automotive-grade components with AEC-Q101 qualification, TS35P05GH is the appropriate selection. For general-purpose applications without automotive qualification requirements, TS35P05G provides electrical equivalence at potentially lower cost.

Frequently Asked Questions (FAQ)

Q: Can TS35P05GH be used as a direct replacement for TS35P05GHC2G?

A: Yes. The TS35P05GH is a direct substitute. Both parts share identical electrical specifications (600 V, 35 A, 1.1 V forward voltage), the same through-hole TS-6P package, automotive-grade classification, and AEC-Q101 qualification. The primary difference is product status: TS35P05GHC2G is discontinued while TS35P05GH is in active production.

Q: What is the difference between TS35P05GH and TS35P05G?

A: Both parts are electrically equivalent with identical voltage, current, and temperature ratings. The key difference is that TS35P05GH carries automotive-grade classification and AEC-Q101 qualification, while TS35P05G does not specify these certifications. Both use the same TS-6P through-hole package.

Q: Are there any packaging differences between the substitute parts?

A: No. All three parts (TS35P05GHC2G, TS35P05GH, and TS35P05G) use the 4-SIP, TS-6P through-hole package configuration. They are mechanically interchangeable in PCB layouts designed for this package type.

Q: Which substitute should be selected for automotive applications?

A: TS35P05GH is the appropriate selection for automotive applications. This part maintains the automotive-grade classification and AEC-Q101 qualification of the original TS35P05GHC2G, ensuring compliance with automotive industry standards.

Q: Are the forward voltage characteristics identical across all three parts?

A: Yes. All three parts specify a maximum forward voltage of 1.1 V at 17.5 A. The reverse leakage current is also identical at 10 µA @ 600 V across all variants.

Q: What is the operating temperature range for these bridge rectifiers?

A: All three parts operate across the temperature range of -55°C to 150°C (junction temperature). This range is identical for TS35P05GHC2G, TS35P05GH, and TS35P05G.

Q: Are these parts RoHS compliant?

A: Yes. All three parts are ROHS3 compliant and carry unlimited moisture sensitivity level (MSL 1), indicating no special moisture handling requirements during storage or assembly.