TS25P07G C2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS25P07G C2G is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 1 kV peak reverse voltage and 25 A average rectified current. This component is classified as discontinued at DiGi Electronics, necessitating identification of equivalent and substitute parts for ongoing applications. The part is housed in a 4-SIP, TS-6P through-hole package and operates across a temperature range of -55°C to 150°C. Equivalent alternatives are available from the same manufacturer and from cross-compatible sources, all meeting ROHS3 compliance and REACH unaffected status.

Substiute Parts

TS25P07G C2G

Taiwan Semiconductor CorporationIn Stock: 763TS25P07G C2G Datasheet

Current PartRFQ

TS25P07G

Taiwan Semiconductor CorporationIn Stock: 1515TS25P07G Datasheet

DirectRFQ

TS25P07GH

Taiwan Semiconductor CorporationIn Stock: 2024TS25P07GH Datasheet

Parametric EquivalentRFQ

DFB25100

onsemiIn Stock: 1335DFB25100 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TS25P07G C2G is determined by strict equivalence across the following electrical and mechanical parameters:

• Voltage Rating: Peak reverse voltage of 1 kV
• Current Rating: Average rectified current of 25 A
• Forward Voltage: Maximum 1.1 V at specified forward current
• Reverse Leakage: 10 µA at 1000 V
• Temperature Range: -55°C to 150°C operating junction temperature
• Package Type: 4-SIP, TS-6P through-hole configuration
• Compliance: ROHS3 compliant, REACH unaffected

All substitute parts listed maintain these core electrical specifications and physical package requirements. Variations in product status, packaging format (tube vs. other), and automotive qualification do not affect electrical interchangeability within the specified parameter set.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: TS25P07G

The TS25P07G is the direct equivalent to the TS25P07G C2G. Both parts are manufactured by Taiwan Semiconductor Corporation and share identical electrical specifications. The TS25P07G maintains active product status and is available in tube packaging. This part is the preferred substitute for direct replacement in existing designs.

Secondary Substitute: TS25P07GH

The TS25P07GH is a parametric equivalent with automotive-grade qualification (AEC-Q101). This part is suitable for applications requiring automotive-level reliability and traceability. The TS25P07GH is manufactured by Taiwan Semiconductor Corporation and maintains active product status. Selection of this part is appropriate when automotive compliance is a design requirement.

Cross-Manufacturer Substitute: DFB25100

The DFB25100, manufactured by onsemi, is a parametric equivalent meeting all core electrical and mechanical specifications. However, this part carries a product status of "Not For New Designs," indicating it is in end-of-life phase. The DFB25100 is suitable only for legacy system maintenance or repair applications where existing inventory exists. New designs should not incorporate this part.

Frequently Asked Questions (FAQ)

Q: Can TS25P07G be used as a direct replacement for TS25P07G C2G?

A: Yes. The TS25P07G is electrically and mechanically equivalent to the TS25P07G C2G. Both parts share identical voltage ratings (1 kV), current ratings (25 A), forward voltage characteristics (1.1 V @ 25 A), reverse leakage (10 µA @ 1000 V), temperature range (-55°C to 150°C), and package configuration (4-SIP, TS-6P through-hole). The primary difference is packaging format and product status; TS25P07G is currently active.

Q: What is the difference between TS25P07G and TS25P07GH?

A: Both parts are electrically equivalent with identical voltage, current, and temperature specifications. The TS25P07GH includes automotive-grade qualification (AEC-Q101) and is designated for automotive applications. Selection between these parts depends on whether automotive compliance is required for the application.

Q: Is DFB25100 suitable for new designs?

A: No. The DFB25100 carries a product status of "Not For New Designs." This part is appropriate only for maintenance, repair, or legacy system support where existing inventory is available. New designs should use TS25P07G or TS25P07GH.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts—TS25P07G, TS25P07GH, and DFB25100—are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: Does the forward voltage specification differ between substitute parts?

A: The TS25P07G specifies forward voltage at 1.5 A, while TS25P07G C2G, TS25P07GH, and DFB25100 specify forward voltage at 25 A. All parts maintain a maximum forward voltage of 1.1 V at their respective measurement currents. This difference reflects measurement methodology and does not affect electrical interchangeability.

Q: Can these parts be used interchangeably in PCB layouts?

A: Yes. All substitute parts use the identical 4-SIP, TS-6P through-hole package configuration. No PCB layout modifications are required when substituting between TS25P07G C2G, TS25P07G, TS25P07GH, or DFB25100.

Q: What is the moisture sensitivity level for these parts?

A: TS25P07G C2G, TS25P07G, and TS25P07GH have a Moisture Sensitivity Level (MSL) of 1 (Unlimited), indicating no moisture sensitivity restrictions. DFB25100 has MSL listed as Not Applicable. All parts can be stored and handled under standard conditions without special moisture control requirements.