TS25P06GHC2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS25P06GHC2G is a single-phase bridge rectifier manufactured by Taiwan Semiconductor Corporation, rated for 800 V peak reverse voltage and 25 A average rectified current. This component is designed for through-hole mounting in automotive-grade applications and carries AEC-Q101 qualification. The part is currently discontinued at DiGi Electronics, necessitating identification of equivalent and substitute components that maintain electrical and mechanical compatibility for ongoing production and repair applications.

Substiute Parts

TS25P06GHC2G

Taiwan Semiconductor CorporationIn Stock: 753TS25P06GHC2G Datasheet

Current PartRFQ

TS25P06GH

Taiwan Semiconductor CorporationIn Stock: 2124TS25P06GH Datasheet

DirectRFQ

TS25P06G

Taiwan Semiconductor CorporationIn Stock: 1396TS25P06G Datasheet

Parametric EquivalentRFQ

DFB2580

onsemiIn Stock: 1465DFB2580 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS25P06GHC2G are identified based on strict electrical and mechanical parameter matching. The primary substitution criteria are:

Critical Parameters for Substitution:

• Diode Type: Single Phase
• Voltage - Peak Reverse (Max): 800 V
• Current - Average Rectified (Io): 25 A
• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P
• Operating Temperature Range: -55°C ~ 150°C (TJ)

All identified substitute parts maintain these core electrical specifications and physical form factor. Variations in forward voltage characteristics at different current levels and product status do not preclude functional substitution when electrical requirements are met within the specified operating parameters.

Parameter Comparison

Engineering Selection Recommendations

TS25P06GH is the primary substitute for TS25P06GHC2G. Both components are manufactured by Taiwan Semiconductor Corporation and share identical electrical specifications. TS25P06GH maintains Active product status and is available in higher inventory quantities (2091 Pcs), providing supply continuity for applications currently using TS25P06GHC2G.

TS25P06G is a parametric equivalent manufactured by Taiwan Semiconductor Corporation with Active product status. This part maintains all critical electrical parameters with the exception of forward voltage measurement at 15 A rather than 25 A. TS25P06G is suitable for applications where the forward voltage specification at full rated current is not a design constraint.

DFB2580 is a parametric equivalent manufactured by onsemi with identical electrical specifications to TS25P06GHC2G. However, DFB2580 carries a "Not For New Designs" product status designation. This component is suitable for sustaining production and field replacement applications where design qualification has already been completed, but is not recommended for new product development.

All three substitute parts maintain automotive-grade qualification (AEC-Q101 where specified), ROHS3 compliance, and identical through-hole TS-6P package form factor, ensuring direct mechanical and electrical compatibility in existing circuit designs.

Frequently Asked Questions (FAQ)

Q: Can TS25P06GH be used as a direct replacement for TS25P06GHC2G?

A: Yes. TS25P06GH is a direct substitute with identical electrical specifications, including 800 V peak reverse voltage, 25 A average rectified current, and 1.1 V forward voltage at 25 A. Both components use the same TS-6P through-hole package and maintain equivalent thermal and compliance characteristics.

Q: What is the difference between TS25P06GH and TS25P06G?

A: Both parts are manufactured by Taiwan Semiconductor Corporation and share the same core electrical ratings. The primary difference is the forward voltage measurement point: TS25P06GH is specified at 1.1 V @ 25 A, while TS25P06G is specified at 1.1 V @ 15 A. Both maintain the same maximum forward voltage value and are electrically compatible for standard applications.

Q: Why is DFB2580 marked "Not For New Designs"?

A: DFB2580 carries a "Not For New Designs" status, indicating that the manufacturer (onsemi) is not recommending this part for new product development. However, the component remains electrically and mechanically equivalent to TS25P06GHC2G and is suitable for sustaining production and field replacement where existing designs have already been qualified.

Q: Are all substitute parts in the same physical package?

A: Yes. TS25P06GH, TS25P06G, and DFB2580 all use the 4-SIP, TS-6P through-hole package form factor, ensuring direct mechanical compatibility with existing PCB layouts designed for TS25P06GHC2G.

Q: Do the substitute parts maintain automotive qualification?

A: TS25P06GH and DFB2580 maintain automotive-grade qualification with AEC-Q101 certification. TS25P06G specifications do not explicitly list automotive grade or AEC-Q101 qualification in the provided data. Verification of automotive qualification requirements should be confirmed against specific application standards.

Q: What inventory availability exists for these substitute parts?

A: TS25P06GH has 2091 Pcs in stock, TS25P06G has 1307 Pcs in stock, and DFB2580 has 1421 Pcs in stock. All three parts are available in higher quantities than the discontinued TS25P06GHC2G (718 Pcs).