TS25P03GHC2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS25P03GHC2G is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 200 V peak reverse voltage and 25 A average rectified current. This component is designed for through-hole mounting in TS-6P package configuration and meets automotive-grade AEC-Q101 qualification standards.

The TS25P03GHC2G has been discontinued at DiGi Electronics. Equivalent and substitute parts are available from Taiwan Semiconductor Corporation and Fairchild Semiconductor that maintain identical electrical and mechanical specifications, enabling direct replacement in existing designs and new applications.

Substiute Parts

TS25P03GHC2G

Taiwan Semiconductor CorporationIn Stock: 858TS25P03GHC2G Datasheet

Current PartRFQ

TS25P03GH

Taiwan Semiconductor CorporationIn Stock: 917TS25P03GH Datasheet

DirectRFQ

TS25P03G

Taiwan Semiconductor CorporationIn Stock: 775TS25P03G Datasheet

Parametric EquivalentRFQ

DFB2520

Fairchild SemiconductorIn Stock: 2229DFB2520 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS25P03GHC2G are classified based on electrical and mechanical parameter equivalence. All substitute parts maintain identical specifications across the following critical parameters:

• Voltage - Peak Reverse (Max): 200 V
• Current - Average Rectified (Io): 25 A
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 25 A
• Current - Reverse Leakage @ Vr: 10 µA @ 200 V
• Operating Temperature Range: -55°C to 150°C (TJ)
• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P
• Diode Type: Single Phase
• Technology: Standard

Substitute parts are grouped into two categories:

Direct Manufacturer Substitutes: Parts manufactured by Taiwan Semiconductor Corporation (TS25P03GH and TS25P03G) that share the same base product number and maintain full electrical and mechanical compatibility.

Parametric Equivalents: Parts from alternative manufacturers (Fairchild Semiconductor DFB2520) that match all electrical specifications and package requirements while offering active product status and alternative supply sources.

Parameter Comparison

Engineering Selection Recommendations

TS25P03GH is the primary direct substitute for TS25P03GHC2G. Both parts are manufactured by Taiwan Semiconductor Corporation and maintain identical electrical and mechanical specifications. TS25P03GH carries active product status with 854 units in stock, ensuring supply continuity. This part is recommended for applications requiring direct replacement with maintained automotive-grade AEC-Q101 qualification and ROHS3 compliance.

TS25P03G is a parametric equivalent manufactured by Taiwan Semiconductor Corporation. This part maintains all electrical specifications and package compatibility with TS25P03GHC2G. TS25P03G is active with 726 units in stock and provides an alternative within the same manufacturer's product line.

DFB2520 is a parametric equivalent manufactured by Fairchild Semiconductor. This part matches all electrical specifications and package requirements of TS25P03GHC2G. DFB2520 is active with 2200 units in stock, providing the highest inventory availability among all substitutes. This part is suitable for applications where alternative manufacturer sourcing is acceptable.

Selection between substitute parts should be based on supply availability, manufacturer preference, and inventory requirements. All three substitute parts are electrically and mechanically interchangeable with TS25P03GHC2G.

Frequently Asked Questions (FAQ)

Q: Can TS25P03GH be used as a direct replacement for TS25P03GHC2G?

A: Yes. TS25P03GH is a direct substitute manufactured by Taiwan Semiconductor Corporation. Both parts share identical electrical specifications (200 V peak reverse voltage, 25 A average rectified current, 1.1 V forward voltage at 25 A), operating temperature range (-55°C to 150°C), and TS-6P through-hole package configuration. TS25P03GH maintains active product status and AEC-Q101 automotive qualification.

Q: What is the difference between TS25P03GH and TS25P03G?

A: Both parts are manufactured by Taiwan Semiconductor Corporation and maintain identical electrical and mechanical specifications. The primary difference is product designation within the manufacturer's product line. Both are active, AEC-Q101 qualified, and suitable for direct replacement of TS25P03GHC2G.

Q: Is DFB2520 compatible with TS25P03GHC2G?

A: Yes. DFB2520 is a parametric equivalent manufactured by Fairchild Semiconductor. It matches all electrical specifications (200 V peak reverse voltage, 25 A average rectified current, 1.1 V forward voltage at 25 A) and uses the identical TS-6P through-hole package. DFB2520 is suitable for applications where alternative manufacturer sourcing is acceptable.

Q: Are all substitute parts automotive-grade?

A: TS25P03GH and TS25P03G are automotive-grade with AEC-Q101 qualification. DFB2520 specifications do not include automotive-grade designation or AEC-Q101 qualification in the provided data. For applications requiring automotive-grade certification, TS25P03GH or TS25P03G are recommended.

Q: What is the package configuration for all these parts?

A: All parts use the 4-SIP, TS-6P through-hole package configuration. This ensures mechanical and electrical compatibility across all substitute parts without requiring PCB layout modifications.

Q: Which substitute part has the best inventory availability?

A: DFB2520 has the highest inventory availability with 2200 units in stock, compared to 854 units for TS25P03GH and 726 units for TS25P03G. Selection should consider both availability and manufacturer preference requirements.

Q: Are all substitute parts RoHS compliant?

A: TS25P03GH and TS25P03G are ROHS3 compliant. RoHS compliance status is not specified for DFB2520 in the provided data. For applications requiring RoHS compliance verification, TS25P03GH or TS25P03G are recommended.