TS25P01GHD2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS25P01GHD2G is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 50 V peak reverse voltage and 25 A average rectified current. This component is designed for through-hole mounting in the TS-6P package and meets automotive-grade specifications with AEC-Q101 qualification.

The TS25P01GHD2G is currently discontinued at DiGi Electronics. Equivalent and substitute parts are available to maintain design continuity and ensure supply chain availability for applications requiring single-phase bridge rectification at these electrical specifications.

Substiute Parts

TS25P01GHD2G

Taiwan Semiconductor CorporationIn Stock: 1007TS25P01GHD2G Datasheet

Current PartRFQ

TS25P01GH

Taiwan Semiconductor CorporationIn Stock: 1182TS25P01GH Datasheet

DirectRFQ

TS25P01G

Taiwan Semiconductor CorporationIn Stock: 914TS25P01G Datasheet

Parametric EquivalentRFQ

DFB2505

Fairchild SemiconductorIn Stock: 2506DFB2505 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS25P01GHD2G are classified based on electrical and mechanical parameter compatibility. The substitution logic is determined by the following critical parameters:

Electrical Compatibility Criteria:

• Voltage - Peak Reverse (Max): 50 V minimum
• Current - Average Rectified (Io): 25 A minimum
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 25 A maximum
• Current - Reverse Leakage @ Vr: 10 µA @ 50 V maximum
• Operating Temperature Range: -55°C to 150°C (TJ)

Mechanical Compatibility Criteria:

• Diode Type: Single Phase
• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P

Compliance Criteria:

• Grade: Automotive
• Qualification: AEC-Q101
• RoHS Status: ROHS3 Compliant

Substitute parts must meet or exceed all electrical parameters and maintain identical mechanical and package specifications. Parts are grouped into direct substitutes (identical specifications) and parametric equivalents (meeting minimum requirements).

Parameter Comparison

Engineering Selection Recommendations

TS25P01G (Parametric Equivalent - Recommended Primary Substitute)

The TS25P01G is the recommended primary substitute for the discontinued TS25P01GHD2G. This part maintains identical electrical specifications including 50 V peak reverse voltage, 25 A average rectified current, and 1.1 V forward voltage drop. The TS25P01G is manufactured by Taiwan Semiconductor Corporation, ensuring design continuity and supply chain reliability. The part is currently in active production status with 865 pieces in stock. Mechanical compatibility is confirmed through identical TS-6P through-hole packaging. RoHS3 compliance is maintained.

TS25P01GH (Direct Substitute - Limited Application)

The TS25P01GH is a direct substitute from Taiwan Semiconductor Corporation with identical current and forward voltage specifications. However, this part is rated for 35 V peak reverse voltage, which is below the 50 V specification of the original TS25P01GHD2G. The TS25P01GH is suitable only for applications where the circuit operates at 35 V or lower peak reverse voltage. This part is currently in active production with 1074 pieces in stock and maintains RoHS3 compliance.

DFB2505 (Parametric Equivalent - Alternative Source)

The DFB2505 manufactured by Fairchild Semiconductor provides an alternative source for single-phase bridge rectification at identical electrical specifications. This part meets the 50 V peak reverse voltage and 25 A current requirements with matching forward voltage and reverse leakage characteristics. The DFB2505 is available in through-hole TS-6P packaging and is currently in active production with 2400 pieces in stock. This part is suitable for applications where multi-source component qualification is required.

Frequently Asked Questions (FAQ)

Q: Can TS25P01GH be used as a direct replacement for TS25P01GHD2G?

A: The TS25P01GH is not a direct replacement. While it maintains identical current and forward voltage specifications, the peak reverse voltage rating is 35 V compared to the 50 V rating of the TS25P01GHD2G. Use TS25P01GH only in applications where the circuit operates at 35 V or lower peak reverse voltage.

Q: What is the primary difference between TS25P01G and TS25P01GHD2G?

A: The TS25P01G and TS25P01GHD2G are electrically identical, with both rated for 50 V peak reverse voltage and 25 A average rectified current. The primary difference is product status: TS25P01GHD2G is discontinued, while TS25P01G is in active production. Both use identical TS-6P through-hole packaging.

Q: Is DFB2505 compatible with the TS25P01GHD2G application?

A: Yes. The DFB2505 meets all electrical specifications of the TS25P01GHD2G, including 50 V peak reverse voltage, 25 A average rectified current, 1.1 V forward voltage, and -55°C to 150°C operating temperature range. Both components use identical TS-6P through-hole packaging. DFB2505 is suitable for applications requiring multi-source qualification.

Q: Are all substitute parts RoHS3 compliant?

A: TS25P01G and TS25P01GH are confirmed ROHS3 compliant. RoHS status for DFB2505 is not specified in the provided data.

Q: What is the package compatibility for all listed parts?

A: All parts use identical 4-SIP, TS-6P through-hole packaging. Direct mechanical and electrical interface compatibility is confirmed for all substitute parts.

Q: Which substitute part has the highest inventory availability?

A: DFB2505 has the highest inventory with 2400 pieces in stock, followed by TS25P01GH with 1074 pieces, and TS25P01G with 865 pieces.

Q: Can TS25P01GHD2G be replaced in automotive applications?

A: TS25P01G is the appropriate substitute for automotive applications, as it maintains the automotive grade classification and AEC-Q101 qualification of the original part. TS25P01GH and DFB2505 do not specify automotive grade or AEC-Q101 qualification in the provided data.