TS25P01G D2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS25P01G D2G is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 50 V peak reverse voltage and 25 A average rectified current. This component is designed for through-hole mounting applications requiring AC-to-DC conversion in industrial and consumer electronics.

The TS25P01G D2G has been discontinued at DiGi Electronics. Equivalent and substitute parts are available to maintain design continuity and ensure supply chain reliability for applications requiring identical electrical and mechanical specifications.

Substiute Parts

TS25P01G D2G

Taiwan Semiconductor CorporationIn Stock: 1203TS25P01G D2G Datasheet

Current PartRFQ

TS25P01G

Taiwan Semiconductor CorporationIn Stock: 914TS25P01G Datasheet

DirectRFQ

DFB2505

Fairchild SemiconductorIn Stock: 2506DFB2505 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS25P01G D2G are qualified based on strict electrical and mechanical parameter matching. The following criteria determine substitution eligibility:

Electrical Parameters (Must Match Exactly):

• Voltage - Peak Reverse (Max): 50 V
• Current - Average Rectified (Io): 25 A
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 25 A
• Current - Reverse Leakage @ Vr: 10 µA @ 50 V
• Operating Temperature Range: -55°C to 150°C (TJ)
• Diode Type: Single Phase
• Technology: Standard

Mechanical Parameters (Must Match Exactly):

• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P
• Supplier Device Package: TS-6P

Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Parts meeting all specified parameters are classified as direct parametric equivalents and may be used interchangeably in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

TS25P01G (Direct Equivalent): This part is the direct equivalent to the TS25P01G D2G, manufactured by Taiwan Semiconductor Corporation. It maintains active product status and carries identical electrical and mechanical specifications. This part is ROHS3 compliant with MSL 1 rating. Selection of this part ensures continuity with the original design without modification.

DFB2505 (Parametric Equivalent): The DFB2505, manufactured by Fairchild Semiconductor, is a parametric equivalent meeting all specified electrical and mechanical requirements. This part is currently active in inventory with higher stock availability (2400 units). The DFB2505 provides an alternative source for applications where supply chain diversification is required. Compliance certifications for RoHS and MSL are not specified in available documentation.

Both substitute parts satisfy the electrical performance and physical form factor requirements of the TS25P01G D2G. Selection between them depends on supply availability, compliance documentation requirements, and manufacturer preference within the design organization.

Frequently Asked Questions (FAQ)

Q: Can the TS25P01G be used as a direct replacement for the TS25P01G D2G?

A: Yes. The TS25P01G is a direct equivalent with identical electrical specifications (50 V, 25 A, 1.1 V forward voltage, 10 µA reverse leakage), operating temperature range (-55°C to 150°C), and package configuration (4-SIP, TS-6P through-hole). Both parts are ROHS3 compliant with MSL 1 rating.

Q: What are the key differences between the TS25P01G and DFB2505?

A: Both parts are parametric equivalents with identical electrical performance and package specifications. The primary differences are manufacturer (Taiwan Semiconductor Corporation versus Fairchild Semiconductor) and product status (both active). RoHS and MSL compliance documentation is available for the TS25P01G but not specified for the DFB2505.

Q: Are all substitute parts pin-compatible with the TS25P01G D2G?

A: Yes. All listed substitute parts use the 4-SIP, TS-6P through-hole package configuration with identical pin assignments for single-phase bridge rectifier applications.

Q: Can the DFB2505 be used in applications originally designed for the TS25P01G D2G?

A: Yes. The DFB2505 meets all specified electrical parameters (50 V peak reverse voltage, 25 A average rectified current, 1.1 V forward voltage, 10 µA reverse leakage) and operating temperature requirements (-55°C to 150°C). The through-hole package and pin configuration are identical.

Q: What is the operating temperature range for these bridge rectifiers?

A: All listed parts operate across a junction temperature range of -55°C to 150°C (TJ), suitable for industrial and consumer applications with extended temperature requirements.

Q: Are these parts suitable for high-current applications?

A: Yes. All listed parts are rated for 25 A average rectified current with 50 V peak reverse voltage, making them suitable for power supply and industrial rectification applications within these specifications.