TS25P01G C2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS25P01G C2G is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 50 V peak reverse voltage and 25 A average rectified current. This component is designed for through-hole mounting applications requiring AC-to-DC conversion in industrial and consumer electronics.

The TS25P01G C2G has been discontinued at DiGi Electronics. Equivalent and substitute parts are available from active product lines that maintain identical electrical and mechanical specifications, ensuring direct functional replacement without circuit redesign.

Substiute Parts

TS25P01G C2G

Taiwan Semiconductor CorporationIn Stock: 1176TS25P01G C2G Datasheet

Current PartRFQ

TS25P01G

Taiwan Semiconductor CorporationIn Stock: 914TS25P01G Datasheet

DirectRFQ

DFB2505

Fairchild SemiconductorIn Stock: 2506DFB2505 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS25P01G C2G are qualified based on matching the following critical parameters:

• Diode Type: Single Phase bridge rectifier configuration
• Voltage - Peak Reverse (Max): 50 V
• Current - Average Rectified (Io): 25 A
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 25 A
• Current - Reverse Leakage @ Vr: 10 µA @ 50 V
• Operating Temperature Range: -55°C to 150°C (TJ)
• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P

Parts meeting all these parameters are electrically and mechanically interchangeable. Substitutes are grouped into two categories: direct manufacturer equivalents and parametric equivalents from alternative manufacturers.

Parameter Comparison

Engineering Selection Recommendations

TS25P01G (Direct Equivalent)

The TS25P01G from Taiwan Semiconductor Corporation is the primary substitute for the discontinued TS25P01G C2G. This part maintains identical electrical specifications, package configuration, and compliance certifications (ROHS3, REACH Unaffected). The direct equivalent is currently in active production with 865 units in stock, ensuring supply continuity. This option is recommended for applications requiring full compliance documentation and certification traceability.

DFB2505 (Parametric Equivalent)

The DFB2505 from Fairchild Semiconductor provides parametric equivalence across all critical electrical and mechanical specifications. All voltage, current, temperature, and package parameters match the original part exactly. The DFB2505 is actively produced with 2400 units in stock, offering superior availability. This option is suitable for applications where manufacturer flexibility is acceptable and compliance requirements do not mandate specific supplier documentation.

Both substitutes are through-hole mounted in the 4-SIP, TS-6P package and operate across the identical temperature range of -55°C to 150°C (TJ).

Frequently Asked Questions (FAQ)

Q: Can the TS25P01G be directly replaced with the DFB2505?

A: Yes. The DFB2505 matches all critical electrical parameters: 50 V peak reverse voltage, 25 A average rectified current, 1.1 V forward voltage at 25 A, and 10 µA reverse leakage at 50 V. Both components use the 4-SIP, TS-6P through-hole package and operate across -55°C to 150°C. Direct pin-for-pin and functional substitution is valid.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution eligibility is determined by matching: diode type (single phase), voltage rating (50 V peak reverse), current rating (25 A average rectified), forward voltage (1.1 V @ 25 A), reverse leakage (10 µA @ 50 V), operating temperature range (-55°C to 150°C), mounting type (through hole), and package configuration (4-SIP, TS-6P).

Q: Are there compliance differences between the substitute parts?

A: The TS25P01G direct equivalent maintains full ROHS3 compliance and REACH Unaffected status matching the original part. The DFB2505 compliance specifications are not provided in the available data. Compliance requirements should be verified with the supplier if regulatory documentation is required.

Q: What is the difference between the discontinued TS25P01G C2G and the active TS25P01G?

A: Both parts are electrically and mechanically identical. The TS25P01G C2G has been discontinued at DiGi Electronics, while the TS25P01G remains in active production. The active variant is the recommended replacement for new designs and restocking.

Q: Can these parts be used interchangeably in existing circuit boards?

A: Yes. All three parts (TS25P01G C2G, TS25P01G, and DFB2505) share the 4-SIP, TS-6P through-hole package with identical pin configuration and spacing. No PCB modifications are required for substitution.

Q: Which substitute offers the best availability?

A: The DFB2505 from Fairchild Semiconductor currently has 2400 units in stock, compared to 865 units for the TS25P01G direct equivalent. The DFB2505 provides superior supply availability for high-volume applications.