TS20P07G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS20P07G is a single-phase bridge rectifier manufactured by Taiwan Semiconductor Corporation, rated for 1 kV peak reverse voltage and 20 A average rectified current. This component is packaged in a through-hole TS-6P configuration and is designed for standard rectification applications requiring robust thermal performance across the -55°C to 150°C operating range.

The TS20P07G has been discontinued at DiGi Electronics. Equivalent and substitute parts are available from alternative manufacturers that maintain electrical and mechanical compatibility within the specified parameter tolerances for this bridge rectifier category.

Substiute Parts

TS20P07G

Taiwan Semiconductor CorporationIn Stock: 2199TS20P07G Datasheet

Current PartRFQ

GBJ2010_T0_00601

Panjit International Inc.In Stock: 2432GBJ2010_T0_00601 Datasheet

SimilarRFQ

GBJ20M_T0_00101

Panjit International Inc.In Stock: 1588GBJ20M_T0_00101 Datasheet

SimilarRFQ

DFB20100

onsemiIn Stock: 1366DFB20100 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TS20P07G is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Diode Type: Single Phase
• Technology: Standard
• Voltage - Peak Reverse (Max): 1 kV
• Current - Average Rectified (Io): 20 A
• Operating Temperature Range: -55°C to 150°C (TJ)
• Mounting Type: Through Hole
• RoHS Status: ROHS3 Compliant

Acceptable Parameter Variations:

• Voltage - Forward (Vf) (Max) @ If: Substitute values must not exceed the main part specification
• Current - Reverse Leakage @ Vr: Substitute values must not exceed the main part specification
• Package / Case: Physical form factor must accommodate through-hole mounting; TS-6P and GBJ packages are mechanically compatible within the 4-SIP footprint category

Substitute parts are grouped based on package type: TS-6P direct equivalents and GBJ-package alternatives that maintain electrical performance within the specified tolerances.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: GBJ2010_T0_00601 (Panjit International Inc.)

The GBJ2010_T0_00601 is the recommended substitute for new applications and ongoing production. This part maintains full electrical equivalence across all critical parameters: 1 kV peak reverse voltage, 20 A average rectified current, and -55°C to 150°C operating temperature range. The GBJ2010_T0_00601 carries Active product status, ensuring long-term availability and supply chain stability. Both parts are ROHS3 compliant and carry identical REACH and ECCN classifications. The forward voltage specification (1.05 V @ 10 A) is superior to the main part, and reverse leakage (5 µA @ 1000 V) is lower, indicating improved performance characteristics. The GBJ package form factor is mechanically compatible with through-hole PCB layouts designed for the TS-6P footprint.

Secondary Substitute: DFB20100 (onsemi)

The DFB20100 provides direct package compatibility with the TS20P07G, maintaining the identical TS-6P through-hole configuration. Electrical specifications are equivalent: 1 kV peak reverse voltage, 20 A average rectified current, 1.1 V forward voltage @ 20 A, and -55°C to 150°C operating temperature. However, the DFB20100 carries a Not For New Designs product status, limiting its suitability for new development. This part is appropriate for legacy system maintenance and repair applications where existing TS-6P footprint compatibility is required.

Alternative Substitute: GBJ20M_T0_00101 (Panjit International Inc.)

The GBJ20M_T0_00101 meets all electrical equivalence criteria with superior forward voltage performance (1 V @ 10 A) and lower reverse leakage (5 µA @ 1000 V). However, this part carries a Not For New Designs product status and is not recommended for new product development. Inventory availability is lower than the GBJ2010_T0_00601. This part is suitable only for legacy applications where existing designs require substitution.

Frequently Asked Questions (FAQ)

Q: Can the GBJ2010_T0_00601 be used as a direct replacement for the TS20P07G in existing designs?

A: Yes. The GBJ2010_T0_00601 meets all electrical specifications for the TS20P07G: 1 kV peak reverse voltage, 20 A average rectified current, and -55°C to 150°C operating temperature. Both parts are single-phase standard bridge rectifiers with through-hole mounting. The GBJ package form factor is mechanically compatible with TS-6P through-hole PCB layouts. Verification of PCB footprint compatibility is required before implementation.

Q: What is the difference between the TS-6P and GBJ package configurations?

A: Both TS-6P and GBJ are 4-SIP (Single In-line Package) through-hole configurations designed for bridge rectifier applications. The TS-6P is the package designation used by Taiwan Semiconductor Corporation; the GBJ is the package designation used by Panjit International Inc. and other manufacturers. Both packages accommodate the same electrical specifications and are mechanically compatible with standard through-hole PCB layouts for 20 A / 1 kV bridge rectifiers.

Q: Why is the DFB20100 marked as Not For New Designs?

A: The Not For New Designs status indicates that onsemi has designated this part for legacy support only. While the DFB20100 maintains full electrical equivalence to the TS20P07G, new product development should utilize the GBJ2010_T0_00601, which carries Active product status and ensures long-term supply chain availability.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. The TS20P07G, GBJ2010_T0_00601, GBJ20M_T0_00101, and DFB20100 are all ROHS3 compliant. All parts carry identical REACH Unaffected status and EAR99 ECCN classification.

Q: What is the significance of the forward voltage (Vf) differences between substitute parts?

A: Forward voltage differences reflect variations in semiconductor junction design and manufacturing processes. The GBJ2010_T0_00601 (1.05 V @ 10 A) and GBJ20M_T0_00101 (1 V @ 10 A) exhibit lower forward voltage than the TS20P07G (1.1 V @ 20 A), indicating improved efficiency and reduced power dissipation. These differences are within acceptable tolerances for standard bridge rectifier applications and do not affect functional compatibility.

Q: Can the GBJ20M_T0_00101 be used for new product designs?

A: No. The GBJ20M_T0_00101 carries a Not For New Designs product status. This designation indicates that the manufacturer does not recommend this part for new development. The GBJ2010_T0_00601 is the appropriate choice for new product designs, as it maintains Active product status and ensures supply chain continuity.

Q: What is the Moisture Sensitivity Level (MSL) significance for these parts?

A: The TS20P07G and GBJ2010_T0_00601 carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage, handling, or assembly. The DFB20100 and GBJ20M_T0_00101 carry Not Applicable MSL designations. All parts are suitable for standard PCB assembly processes without special moisture control requirements.