TS20P06G C2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS20P06G C2G is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 800 V peak reverse voltage and 20 A average rectified current. This component is designed for through-hole mounting applications requiring standard bridge rectification in industrial and power conversion circuits.

The TS20P06G C2G has been discontinued at DiGi Electronics. Equivalent substitute parts are available from the same manufacturer and alternative suppliers to maintain circuit functionality and performance in replacement or redesign scenarios.

Substiute Parts

TS20P06G C2G

Taiwan Semiconductor CorporationIn Stock: 1028TS20P06G C2G Datasheet

Current PartRFQ

TS20P06G

Taiwan Semiconductor CorporationIn Stock: 2146TS20P06G Datasheet

DirectRFQ

DFB2080

Fairchild SemiconductorIn Stock: 1460DFB2080 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS20P06G C2G are qualified based on matching the following critical electrical and mechanical parameters:

• Diode Type: Single Phase
• Voltage - Peak Reverse (Max): 800 V
• Current - Average Rectified (Io): 20 A
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 20 A
• Current - Reverse Leakage @ Vr: 10 µA @ 800 V
• Operating Temperature Range: -55°C to 150°C (TJ)
• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P

Parts meeting all these parameters are electrically and mechanically interchangeable for direct replacement in the circuit application.

Parameter Comparison

Engineering Selection Recommendations

TS20P06G (Taiwan Semiconductor Corporation): This part is the direct equivalent to the discontinued TS20P06G C2G, manufactured by the same supplier. It maintains identical electrical specifications and package configuration. Product status is Active with higher inventory availability (2100 Pcs). This part is ROHS3 Compliant and carries the same regulatory compliance as the original part. Selection of this substitute eliminates supplier change while ensuring full parametric compatibility.

DFB2080 (Fairchild Semiconductor): This part provides parametric equivalence across all critical electrical and mechanical specifications. It is manufactured by an alternative supplier and carries Active product status. The DFB2080 meets the same voltage, current, temperature, and package requirements. Selection of this substitute introduces a secondary source option for supply chain continuity. Regulatory compliance documentation should be reviewed for specific application requirements.

Frequently Asked Questions (FAQ)

Q: Can the TS20P06G substitute directly replace the discontinued TS20P06G C2G?

A: Yes. The TS20P06G is manufactured by Taiwan Semiconductor Corporation and matches all electrical parameters (800 V peak reverse voltage, 20 A average rectified current, 1.1 V forward voltage, 10 µA reverse leakage) and mechanical specifications (4-SIP TS-6P package, through-hole mounting, -55°C to 150°C operating range). Direct substitution is supported without circuit modification.

Q: What are the key parameters that determine substitution compatibility?

A: Substitution compatibility is determined by matching: Diode Type (Single Phase), Voltage - Peak Reverse (800 V), Current - Average Rectified (20 A), Voltage - Forward (1.1 V @ 20 A), Current - Reverse Leakage (10 µA @ 800 V), Operating Temperature Range (-55°C to 150°C), Mounting Type (Through Hole), and Package / Case (4-SIP, TS-6P). All substitute parts listed meet these criteria.

Q: Is the DFB2080 from Fairchild Semiconductor electrically equivalent?

A: Yes. The DFB2080 matches all specified electrical parameters: 800 V peak reverse voltage, 20 A average rectified current, 1.1 V forward voltage at 20 A, and 10 µA reverse leakage at 800 V. It also matches the mechanical specifications including through-hole mounting and 4-SIP TS-6P package configuration.

Q: Are there packaging differences between substitute parts?

A: The TS20P06G C2G (discontinued) was supplied in standard packaging. The TS20P06G substitute is supplied in Tube packaging. The DFB2080 substitute is supplied in Bulk packaging. All three parts use the same 4-SIP TS-6P package / case format for circuit board mounting. Packaging format does not affect electrical or mechanical compatibility.

Q: What compliance certifications apply to these substitute parts?

A: The TS20P06G substitute is ROHS3 Compliant, REACH Unaffected, and carries ECCN EAR99 classification. The DFB2080 carries ECCN EAR99 classification. Both parts are suitable for applications requiring standard regulatory compliance in industrial and commercial environments.

Q: Can both substitute parts be used interchangeably in the same application?

A: Yes. Both the TS20P06G and DFB2080 meet identical electrical and mechanical specifications for the TS20P06G C2G. Selection between them depends on supplier availability, packaging format preference, and compliance documentation requirements for the specific application.