TS20P02G C2G Bridge Rectifier Diode Equivalent & Substitute Parts

Part Overview

The TS20P02G C2G is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 100 V peak reverse voltage and 20 A average rectified current. This component is classified as discontinued at DiGi Electronics, necessitating identification of equivalent and substitute parts for ongoing design requirements and production continuity. The part operates across a temperature range of -55°C to 150°C and is housed in a 4-SIP TS-6P through-hole package configuration.

Substiute Parts

TS20P02G C2G

Taiwan Semiconductor CorporationIn Stock: 1066TS20P02G C2G Datasheet

Current PartRFQ

TS20P02G

Taiwan Semiconductor CorporationIn Stock: 934TS20P02G Datasheet

DirectRFQ

TS20P02GH

Taiwan Semiconductor CorporationIn Stock: 1080TS20P02GH Datasheet

Parametric EquivalentRFQ

DFB2010

Fairchild SemiconductorIn Stock: 1984DFB2010 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TS20P02G C2G is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Diode Type: Single Phase
• Technology: Standard
• Voltage - Peak Reverse (Max): 100 V
• Current - Average Rectified (Io): 20 A
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 20 A
• Operating Temperature Range: -55°C to 150°C (TJ)
• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P

Substitute parts are classified into two categories:

Direct Manufacturer Equivalent: TS20P02G from Taiwan Semiconductor Corporation maintains identical electrical and mechanical specifications with active product status.

Parametric Equivalent: TS20P02GH from Taiwan Semiconductor Corporation and DFB2010 from Fairchild Semiconductor meet all mandatory electrical parameters and package requirements. TS20P02GH includes automotive-grade qualification (AEC-Q101). DFB2010 specifies reverse leakage current at 50 V rather than 100 V but maintains all other critical parameters.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: TS20P02G from Taiwan Semiconductor Corporation is the direct manufacturer equivalent with active product status. This part maintains identical electrical specifications and package configuration while offering improved supply availability compared to the discontinued TS20P02G C2G variant.

Secondary Selection: TS20P02GH from Taiwan Semiconductor Corporation is suitable for applications requiring automotive-grade qualification and AEC-Q101 compliance. This part meets all electrical and mechanical requirements of the original specification with the addition of automotive-grade certification.

Alternative Selection: DFB2010 from Fairchild Semiconductor provides parametric equivalence across all critical electrical parameters and package requirements. This part is suitable for applications where cross-manufacturer sourcing is acceptable. The reverse leakage current specification is provided at 50 V rather than 100 V; however, the maximum value of 10 µA remains consistent with the original specification.

All substitute parts are compliant with through-hole mounting requirements and maintain the 4-SIP TS-6P package configuration necessary for direct board-level replacement.

Frequently Asked Questions (FAQ)

Q: Can TS20P02G be used as a direct replacement for TS20P02G C2G?

A: Yes. TS20P02G is the direct manufacturer equivalent with identical electrical specifications (100 V peak reverse voltage, 20 A average rectified current, 1.1 V forward voltage drop at 20 A) and package configuration (4-SIP TS-6P through-hole). The primary difference is active product status versus discontinued status.

Q: What is the difference between TS20P02G and TS20P02GH?

A: Both parts share identical electrical specifications and package configuration. TS20P02GH includes automotive-grade qualification and AEC-Q101 compliance, making it suitable for automotive applications. Selection between these parts depends on application requirements for automotive certification.

Q: Is DFB2010 a suitable substitute for TS20P02G C2G?

A: Yes. DFB2010 meets all mandatory electrical parameters: 100 V peak reverse voltage, 20 A average rectified current, 1.1 V forward voltage drop at 20 A, and -55°C to 150°C operating temperature range. The package configuration (4-SIP TS-6P through-hole) is identical. The reverse leakage current specification is provided at 50 V rather than 100 V; however, the maximum value of 10 µA remains consistent. DFB2010 is manufactured by Fairchild Semiconductor and is suitable for applications where cross-manufacturer sourcing is acceptable.

Q: Are all substitute parts RoHS compliant?

A: TS20P02G and TS20P02GH are both ROHS3 compliant. RoHS compliance status is not specified for DFB2010 in the provided data.

Q: Can these parts be used interchangeably on the same printed circuit board?

A: Yes. All substitute parts utilize the 4-SIP TS-6P through-hole package configuration, enabling direct board-level replacement without modification to PCB layout or mounting hardware.

Q: What is the operating temperature range for all substitute parts?

A: All substitute parts operate across the temperature range of -55°C to 150°C (TJ), matching the original TS20P02G C2G specification.

Q: Are there differences in moisture sensitivity between the substitute parts?

A: TS20P02G and TS20P02GH both specify Moisture Sensitivity Level (MSL) 1 (Unlimited). MSL classification is not specified for DFB2010 in the provided data.