TS20P01GHD2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS20P01GHD2G is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 50 V peak reverse voltage and 20 A average rectified current. This component is classified as discontinued at DiGi Electronics, necessitating identification of active equivalent and substitute parts that maintain identical electrical and mechanical specifications. The part is qualified to AEC-Q101 automotive standards and complies with ROHS3 and REACH requirements.

Substiute Parts

TS20P01GHD2G

Taiwan Semiconductor CorporationIn Stock: 915TS20P01GHD2G Datasheet

Current PartRFQ

TS20P01GH

Taiwan Semiconductor CorporationIn Stock: 875TS20P01GH Datasheet

DirectRFQ

TS20P01G

Taiwan Semiconductor CorporationIn Stock: 877TS20P01G Datasheet

Parametric EquivalentRFQ

DFB2005

Fairchild SemiconductorIn Stock: 2120DFB2005 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS20P01GHD2G are identified based on strict electrical and mechanical parameter matching. All substitute candidates must satisfy the following criteria:

Critical Matching Parameters:

• Diode Type: Single Phase
• Voltage - Peak Reverse (Max): 50 V
• Current - Average Rectified (Io): 20 A
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 20 A
• Current - Reverse Leakage @ Vr: 10 µA @ 50 V
• Operating Temperature Range: -55°C ~ 150°C (TJ)
• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P

Substitute parts are grouped into two categories: direct manufacturer equivalents from Taiwan Semiconductor Corporation and parametric equivalents from alternative manufacturers. All identified substitutes maintain identical electrical performance and mechanical compatibility with the original part.

Parameter Comparison

Engineering Selection Recommendations

TS20P01GH (Direct Manufacturer Equivalent - Recommended Primary Choice)

The TS20P01GH is the direct equivalent from Taiwan Semiconductor Corporation. This part maintains identical electrical specifications, automotive-grade qualification (AEC-Q101), and ROHS3 compliance with the discontinued TS20P01GHD2G. The primary distinction is active product status, ensuring continued availability and supply chain reliability. This part is suitable for direct substitution in all applications where the original part was specified.

TS20P01G (Parametric Equivalent - Secondary Choice)

The TS20P01G is a parametric equivalent from Taiwan Semiconductor Corporation that matches all critical electrical and mechanical parameters. This part shares the same base product number (TS20P01) and maintains identical performance characteristics, operating temperature range, and package configuration. Active product status and comparable inventory levels support its use as an alternative when TS20P01GH availability is constrained.

DFB2005 (Cross-Manufacturer Parametric Equivalent - Alternative Choice)

The DFB2005 from Fairchild Semiconductor is a parametric equivalent that satisfies all specified electrical and mechanical requirements. This part delivers identical voltage, current, and thermal performance within the 4-SIP, TS-6P package. Significantly higher inventory availability (2100 Pcs) provides supply chain flexibility. RoHS and MSL compliance status are not specified for this part; verification against specific application requirements is necessary prior to selection.

Frequently Asked Questions (FAQ)

Q: Can TS20P01GH be used as a direct replacement for TS20P01GHD2G?

A: Yes. The TS20P01GH is a direct equivalent that maintains identical electrical specifications, voltage ratings, current ratings, forward voltage drop, reverse leakage current, operating temperature range, and package configuration. Both parts are qualified to AEC-Q101 automotive standards and comply with ROHS3 requirements.

Q: What is the difference between TS20P01GH and TS20P01G?

A: Both parts are parametric equivalents with identical electrical performance and package specifications. The primary difference is the product designation suffix. Both are manufactured by Taiwan Semiconductor Corporation and maintain active product status. Selection between these parts may be based on inventory availability or supply chain preference.

Q: Is DFB2005 suitable for automotive applications?

A: The DFB2005 meets all electrical and mechanical specifications required for the TS20P01GHD2G application. However, automotive qualification status and RoHS/MSL compliance are not specified in the provided data. Confirmation of automotive-grade certification and compliance requirements is necessary before selection for automotive applications.

Q: Are all substitute parts compatible with the TS-6P package footprint?

A: Yes. All identified substitute parts utilize the 4-SIP, TS-6P package configuration, ensuring mechanical and electrical compatibility with existing PCB designs and through-hole mounting requirements.

Q: What is the operating temperature range for all substitute parts?

A: All substitute parts operate across the identical temperature range of -55°C to 150°C (TJ), matching the thermal specifications of the original TS20P01GHD2G.

Q: Can I use DFB2005 in place of TS20P01GH?

A: The DFB2005 satisfies all specified electrical and mechanical parameters. However, automotive qualification and compliance certifications differ between manufacturers. Application-specific requirements for automotive-grade components and regulatory compliance must be evaluated before substitution.

Q: What inventory levels are available for each substitute part?

A: TS20P01GH has 837 Pcs in stock, TS20P01G has 803 Pcs in stock, and DFB2005 has 2100 Pcs in stock. Inventory levels support component procurement for production and design requirements.