TS15PL06G C2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS15PL06G C2G is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation. This component is classified as a standard bridge rectifier rated for 800 V peak reverse voltage and 15 A average rectified current, housed in a through-hole TS-6P package. The part maintains Active product status and is RoHS3 compliant. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the same package footprint and thermal operating range, enabling direct replacement in circuit applications without design modification.

Substiute Parts

TS15PL06G C2G

Taiwan Semiconductor CorporationIn Stock: 763TS15PL06G C2G Datasheet

Current PartRFQ

TS15PL06G

Taiwan Semiconductor CorporationIn Stock: 1166TS15PL06G Datasheet

Parametric EquivalentRFQ

TS15PL06GH

Taiwan Semiconductor CorporationIn Stock: 2197TS15PL06GH Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS15PL06G C2G are identified based on strict electrical and mechanical parameter equivalence. The substitution criteria are:

Primary Equivalence Parameters:

• Voltage - Peak Reverse (Max): 800 V
• Current - Average Rectified (Io): 15 A
• Voltage - Forward (Vf) (Max) @ If: 930 mV @ 7.5 A
• Current - Reverse Leakage @ Vr: 5 µA @ 800 V
• Operating Temperature Range: -55°C to 150°C (TJ)
• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P
• Diode Type: Single Phase
• Technology: Standard

All identified substitute parts maintain identical electrical performance specifications and physical package compatibility. Substitutes differ only in packaging format (Tube versus other formats) and, in one case, automotive-grade qualification status. These differences do not affect functional interchangeability in standard applications.

Parameter Comparison

Engineering Selection Recommendations

All three parts—TS15PL06G C2G, TS15PL06G, and TS15PL06GH—are functionally equivalent bridge rectifier diodes with identical electrical specifications and package compatibility. Selection between these parts is determined by application requirements and compliance certifications:

TS15PL06G C2G and TS15PL06G: These parts are suitable for general industrial and commercial applications. Both maintain Active product status, RoHS3 compliance, and REACH unaffected status. The primary distinction is packaging format.

TS15PL06GH: This variant includes automotive-grade qualification (AEC-Q101) and is designated for automotive applications. The automotive qualification does not alter electrical performance but indicates compliance with automotive industry reliability and testing standards. This part is appropriate for automotive circuit applications where AEC-Q101 certification is required or specified.

All parts are manufactured by Taiwan Semiconductor Corporation and maintain identical thermal operating ranges (-55°C to 150°C junction temperature), forward voltage characteristics, and reverse leakage specifications. Direct substitution is permissible based on electrical equivalence and package compatibility.

Frequently Asked Questions (FAQ)

Q: Can TS15PL06G be substituted for TS15PL06G C2G?

A: Yes. Both parts are electrically identical bridge rectifiers with 800 V peak reverse voltage and 15 A average rectified current ratings. The parts differ only in packaging format. Direct substitution is permissible in applications where the TS-6P through-hole package is used.

Q: What is the difference between TS15PL06G and TS15PL06GH?

A: The TS15PL06GH includes automotive-grade qualification (AEC-Q101) and is designated for automotive applications. Electrical specifications, package type, and thermal operating range are identical. The TS15PL06GH is selected when automotive industry standards and certifications are required.

Q: Are all three parts RoHS3 compliant?

A: Yes. TS15PL06G C2G, TS15PL06G, and TS15PL06GH are all RoHS3 compliant and REACH unaffected, meeting environmental regulatory requirements for industrial and commercial applications.

Q: What is the operating temperature range for these bridge rectifiers?

A: All three parts operate across a junction temperature range of -55°C to 150°C (TJ), providing thermal performance suitable for industrial and automotive environments.

Q: Can TS15PL06GH be used in non-automotive applications?

A: Yes. The TS15PL06GH maintains identical electrical specifications to the standard variants and can be used in any application requiring a 15 A, 800 V single-phase bridge rectifier. The automotive qualification is an additional certification that does not restrict use in non-automotive circuits.

Q: What is the forward voltage drop at rated current?

A: The maximum forward voltage is 930 mV measured at 7.5 A for all three parts. This specification is consistent across TS15PL06G C2G, TS15PL06G, and TS15PL06GH.

Q: Are these parts suitable for high-temperature applications?

A: Yes. The maximum junction temperature rating of 150°C supports operation in elevated-temperature environments. Reverse leakage current is specified at 5 µA at 800 V across the full operating temperature range.

Q: What packaging formats are available?

A: All three parts use the 4-SIP, TS-6P through-hole package. The primary packaging distinction is the format in which parts are supplied (tube or other formats), which does not affect electrical performance or mechanical compatibility.