TS15PL05GH Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS15PL05GH is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 600 V peak reverse voltage and 15 A average rectified current. This component is packaged in a 4-SIP, TS-6P through-hole configuration and is qualified to AEC-Q101 automotive standards. The TS15PL05GH has been discontinued at DiGi Electronics, making identification of equivalent substitute parts essential for ongoing design support and production continuity. Equivalent alternatives maintain identical electrical performance and mechanical compatibility while offering active product status or alternative packaging options.

Substiute Parts

TS15PL05GH

Taiwan Semiconductor CorporationIn Stock: 813TS15PL05GH Datasheet

Current PartRFQ

TS15PL05G

Taiwan Semiconductor CorporationIn Stock: 759TS15PL05G Datasheet

Parametric EquivalentRFQ

TS15PL05GHC2G

Taiwan Semiconductor CorporationIn Stock: 872TS15PL05GHC2G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS15PL05GH are identified based on strict electrical and mechanical parameter matching. All substitute candidates must satisfy the following criteria:

Electrical Parameters (Must Match):

• Voltage - Peak Reverse (Max): 600 V
• Current - Average Rectified (Io): 15 A
• Voltage - Forward (Vf) (Max) @ If: 900 mV @ 7.5 A
• Current - Reverse Leakage @ Vr: 5 µA @ 600 V
• Operating Temperature Range: -55°C to 150°C (TJ)

Mechanical Parameters (Must Match):

• Diode Type: Single Phase
• Technology: Standard
• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P
• Supplier Device Package: TS-6P

Compliance Parameters (Must Match):

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Substitute parts identified below meet all electrical, mechanical, and compliance requirements. Packaging format (tube versus other configurations) does not affect electrical or mechanical substitution eligibility.

Parameter Comparison

Engineering Selection Recommendations

TS15PL05G: This substitute part is electrically and mechanically equivalent to the TS15PL05GH across all critical parameters. The TS15PL05G maintains active product status and is available in tube packaging. Grade and AEC-Q101 qualification information is not specified for this variant. Selection of TS15PL05G is appropriate for applications where automotive qualification is not a design requirement.

TS15PL05GHC2G: This substitute part is fully equivalent to the TS15PL05GH, maintaining identical electrical specifications, mechanical configuration, automotive grade designation, and AEC-Q101 qualification. The TS15PL05GHC2G is currently active in production. This part is the preferred substitute for applications requiring automotive-grade components with AEC-Q101 qualification, as it preserves all compliance attributes of the original TS15PL05GH.

Frequently Asked Questions (FAQ)

Q: Can TS15PL05G be used as a direct replacement for TS15PL05GH in automotive applications?

A: TS15PL05G matches all electrical and mechanical parameters of TS15PL05GH. However, automotive grade and AEC-Q101 qualification information is not specified for TS15PL05G. For applications requiring automotive qualification, TS15PL05GHC2G is the appropriate substitute.

Q: What is the difference between TS15PL05GH and TS15PL05GHC2G?

A: Both parts are electrically and mechanically identical, with matching 600 V peak reverse voltage, 15 A average rectified current, and TS-6P through-hole packaging. Both carry automotive grade designation and AEC-Q101 qualification. The primary difference is product status: TS15PL05GH is discontinued, while TS15PL05GHC2G is active.

Q: Are all substitute parts compatible with the same PCB footprint?

A: Yes. All substitute parts use the 4-SIP, TS-6P through-hole package configuration, ensuring mechanical and electrical compatibility with PCB designs specified for TS15PL05GH.

Q: Does packaging format (tube versus other configurations) affect electrical performance?

A: No. Packaging format is a supply and handling consideration only. TS15PL05G is supplied in tube packaging while TS15PL05GH and TS15PL05GHC2G packaging format is not specified. Electrical and mechanical performance is identical across all variants.

Q: Which substitute part should be selected for new designs?

A: TS15PL05GHC2G is the recommended substitute for new designs, as it maintains active product status, automotive grade designation, and AEC-Q101 qualification matching the original TS15PL05GH specification.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. TS15PL05G and TS15PL05GHC2G are both ROHS3 compliant with MSL rating of 1 (Unlimited), matching the compliance profile of TS15PL05GH.