TS15PL05G C2G Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS15PL05G C2G is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 600 V peak reverse voltage and 15 A average rectified current. This component is designed for through-hole mounting applications requiring standard bridge rectification in industrial and commercial equipment. The TS15PL05G C2G is currently discontinued at DiGi Electronics, necessitating identification of equivalent and substitute parts to maintain design continuity and procurement availability.

Substiute Parts

TS15PL05G C2G

Taiwan Semiconductor CorporationIn Stock: 928TS15PL05G C2G Datasheet

Current PartRFQ

TS15PL05G

Taiwan Semiconductor CorporationIn Stock: 759TS15PL05G Datasheet

DirectRFQ

TS15PL05GHC2G

Taiwan Semiconductor CorporationIn Stock: 872TS15PL05GHC2G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TS15PL05G C2G is determined by strict equivalence across the following electrical and mechanical parameters:

Critical Substitution Parameters:

• Diode Type: Single Phase
• Voltage - Peak Reverse (Max): 600 V
• Current - Average Rectified (Io): 15 A
• Voltage - Forward (Vf) (Max) @ If: 900 mV @ 7.5 A
• Current - Reverse Leakage @ Vr: 5 µA @ 600 V
• Operating Temperature Range: -55°C ~ 150°C (TJ)
• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P

All identified substitute parts maintain identical electrical performance characteristics and physical packaging specifications. Substitutes are grouped based on product status and compliance certifications, with no deviation from the specified parameters.

Parameter Comparison

Engineering Selection Recommendations

TS15PL05G (Direct Substitute)

The TS15PL05G is an active product with identical electrical and mechanical specifications to the discontinued TS15PL05G C2G. This part maintains all critical parameters including voltage rating, current capacity, forward voltage characteristics, and reverse leakage performance. The direct substitute is packaged in tube format and carries ROHS3 compliance. This part is the primary selection for direct replacement applications.

TS15PL05GHC2G (Parametric Equivalent with Automotive Qualification)

The TS15PL05GHC2G is a parametric equivalent that maintains all electrical and mechanical specifications of the main part while adding automotive-grade qualification under AEC-Q101 standard. This variant is suitable for applications requiring automotive-level reliability and traceability. The TS15PL05GHC2G is currently active and available in inventory. Selection of this part is appropriate when automotive qualification requirements apply to the end application.

Both substitute parts are manufactured by Taiwan Semiconductor Corporation and comply with ROHS3 and REACH requirements. Selection between the direct substitute and the automotive-qualified variant depends on application-specific qualification requirements.

Frequently Asked Questions (FAQ)

Q: Can the TS15PL05G be used as a direct replacement for the discontinued TS15PL05G C2G?

A: Yes. The TS15PL05G maintains identical electrical performance across all specified parameters including 600 V peak reverse voltage, 15 A average rectified current, 900 mV forward voltage at 7.5 A, and 5 µA reverse leakage at 600 V. Operating temperature range, mounting type, and package specifications are identical. The primary difference is product status (active versus discontinued) and packaging format (tube versus original packaging).

Q: What is the difference between TS15PL05G and TS15PL05GHC2G?

A: Both parts are parametric equivalents with identical electrical and mechanical specifications. The TS15PL05GHC2G includes automotive-grade qualification under AEC-Q101 standard, making it suitable for automotive applications requiring this certification. All other parameters, including voltage rating, current capacity, and package type, are identical.

Q: Are these parts pin-compatible with the original TS15PL05G C2G?

A: Yes. All substitute parts use the 4-SIP, TS-6P package configuration with through-hole mounting. Physical dimensions and pin assignments are identical, enabling direct board-level substitution without layout modifications.

Q: Do the substitute parts meet the same compliance requirements as the original part?

A: Yes. All substitute parts are ROHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) moisture sensitivity rating. These compliance characteristics are identical to the original TS15PL05G C2G.

Q: Which substitute part should be selected for non-automotive applications?

A: The TS15PL05G is the appropriate selection for standard industrial and commercial applications. This part is active, maintains all electrical specifications, and carries full compliance certifications without automotive-specific qualification overhead.

Q: Which substitute part should be selected for automotive applications?

A: The TS15PL05GHC2G is the appropriate selection for automotive applications. This part carries AEC-Q101 automotive qualification while maintaining all electrical and mechanical specifications of the original part.

Q: Are there any thermal or performance differences between the substitute parts?

A: No. All substitute parts maintain identical operating temperature range (-55°C ~ 150°C junction temperature), forward voltage characteristics (900 mV @ 7.5 A), and reverse leakage performance (5 µA @ 600 V). Thermal and electrical performance are equivalent across all variants.