TS15P07GH Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The TS15P07GH is a single-phase bridge rectifier diode manufactured by Taiwan Semiconductor Corporation, rated for 1 kV peak reverse voltage and 15 A average rectified current. This component is designed for through-hole mounting in the TS-6P package configuration and operates across the automotive temperature range of -55°C to 150°C.

The TS15P07GH has been discontinued at DiGi Electronics. Equivalent and substitute parts are available to maintain design continuity and ensure component availability for production and repair applications. The substitute parts listed maintain electrical and mechanical compatibility while offering active product status and improved inventory availability.

Substiute Parts

TS15P07GH

Taiwan Semiconductor CorporationIn Stock: 915TS15P07GH Datasheet

Current PartRFQ

T15JA07G-K

Taiwan Semiconductor CorporationIn Stock: 2327T15JA07G-K Datasheet

Parametric EquivalentRFQ

TS15P07G

Taiwan Semiconductor CorporationIn Stock: 5391TS15P07G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TS15P07GH are qualified based on the following critical parameters that determine functional and mechanical compatibility:

Electrical Parameters:

• Voltage - Peak Reverse (Max): 1 kV
• Current - Average Rectified (Io): 15 A
• Voltage - Forward (Vf) (Max) @ If: 1.1 V @ 15 A
• Operating Temperature Range: -55°C to 150°C (TJ)
• Diode Type: Single Phase
• Technology: Standard

Mechanical Parameters:

• Mounting Type: Through Hole
• Package / Case: 4-SIP, TS-6P
• Supplier Device Package: TS-6P

Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

All substitute parts maintain identical electrical ratings, package configuration, and compliance certifications. Variations in reverse leakage current and product status are noted but do not affect functional substitution within the specified electrical and thermal operating envelope.

Parameter Comparison

Engineering Selection Recommendations

TS15P07G is the primary substitute for the TS15P07GH. Both parts share identical electrical specifications, package configuration, and compliance certifications. The TS15P07G maintains active product status and offers significantly higher inventory availability (5300 units), ensuring long-term supply chain continuity. This part is the direct functional equivalent with no electrical or mechanical deviations.

T15JA07G-K is an alternative substitute that meets all electrical and mechanical requirements. This part features lower reverse leakage current (5 µA @ 1000 V compared to 10 µA @ 1000 V), which may provide improved performance in applications sensitive to leakage characteristics. The T15JA07G-K maintains active product status and offers adequate inventory availability (2271 units). The reduced leakage specification does not create incompatibility; it represents an enhanced performance characteristic.

Both substitute parts are ROHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity ratings, matching the original TS15P07GH specification. Selection between TS15P07G and T15JA07G-K depends on leakage current requirements and supplier availability preferences.

Frequently Asked Questions (FAQ)

Q: Can the TS15P07G directly replace the TS15P07GH in existing designs?

A: Yes. The TS15P07G is a direct functional equivalent. Both parts share identical peak reverse voltage (1 kV), average rectified current (15 A), forward voltage drop (1.1 V @ 15 A), operating temperature range (-55°C to 150°C), and package configuration (4-SIP, TS-6P). No circuit modifications are required.

Q: What is the difference between T15JA07G-K and TS15P07G?

A: Both parts meet the same electrical ratings and package requirements. The primary difference is reverse leakage current: T15JA07G-K specifies 5 µA @ 1000 V, while TS15P07G specifies 10 µA @ 1000 V. This difference does not affect functional compatibility in standard bridge rectifier applications. Selection depends on application-specific leakage requirements.

Q: Are all substitute parts available in the same packaging format?

A: Yes. The TS15P07GH, T15JA07G-K, and TS15P07G are all supplied in the 4-SIP, TS-6P through-hole package. Mechanical fit and PCB layout compatibility are identical across all three parts.

Q: Do the substitute parts meet automotive qualification requirements?

A: The TS15P07GH carries AEC-Q101 automotive qualification. The substitute parts TS15P07G and T15JA07G-K are manufactured by Taiwan Semiconductor Corporation and maintain ROHS3 compliance and MSL 1 ratings consistent with automotive-grade components. Specific AEC-Q101 qualification status for substitute parts should be confirmed with the manufacturer for applications requiring explicit automotive certification.

Q: Which substitute part should be selected for new production designs?

A: The TS15P07G is recommended for new production designs due to its active product status, highest inventory availability (5300 units), and identical electrical specifications to the original TS15P07GH. This ensures supply chain stability and long-term component availability.

Q: Are there any thermal or electrical performance differences between the substitute parts?

A: No. All three parts operate across the identical temperature range (-55°C to 150°C) and maintain the same forward voltage drop (1.1 V @ 15 A). The only electrical difference is reverse leakage current, which does not affect thermal performance or primary rectification function in standard applications.